How to Replace Power Steering Pump 2007-2012 Nissan Altima
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Buy Now!
New Power Steering Pump from 1AAuto.com 1aau.to/ia/1ASP...
This video shows you how to install a new power steering pump from TRQ on your 2007-2012 Nissan Altima. A failed power steering pump will make lots of noise, and you'll have trouble steering!
This process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obm5/1A...
• Phillips Head Screwdriver 1aau.to/obm5/1A...
• 14mm Wrench 1aau.to/oXc/1AX...
• 12mm Socket 1aau.to/obyi/1A...
• 14mm Deep Socket
• 14mm Socket 1aau.to/obyi/1A...
• 21mm Socket 1aau.to/oajd/1A...
• 24mm Socket
• Circlip Pliers
• Pliers
• Torque Wrench 1aau.to/oaHD/1A...
• Cloth Rags 1aau.to/oC7/1AX...
• Gloves 1aau.to/oacJ/1A...
• Power Steering Fluid
• Safety Glasses 1aau.to/o5R/1AX...
• Drain Pan 1aau.to/oAq/1AX...
• Floor Jack 1aau.to/o7D/1AX...
• Vise
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you for this! I've been searching for 1 a year now to do this and every method I've seen is tough where they are going through the top bay. So glad I can knock this job out now!
This is extremely informative!!! Thank you so much!!! I'm not used to working on cars, so I'll be borrowing all these tools and it might be an all day thing for me, or two. I appreciate you guys!!
Forget that... Im just going to throw away the whole car.
+Sopheak Chey Thanks for watching our video! 1aau.to/m/Shop-TRQ
Excellent!!! This is the best instruction video on this procedure. Now, I can get to work with confidence. Thanks!!!
Excellent video and description! Thank you!
Definitely need to get this done, looks a little tedious but I will have to just to save some money. Thx. appreciate it
Excellent video very thorough explanation, outstanding job thank you.
The car I'm working on is a 2011 Maxima and it's slightly different. The 14mm bolt is different. It mounts into the back and threads through to the front but not into a nut. It threads through to the timing cover
I've always found these guys to have great demonstration on there videos. However. That top bolt extraction was only showing once the bolt had been broken loose and was already about to be removed. This is not the case I have to use a breaker bar to loosen and looks like I will need to remove the motor mounts just to get the leverage needed.
Wow! You made it look so easy. How much do you think it will cost for this job?
Great video thanks
Good afternoon what type of pump is it? E or hydraulic?
I have a big leak in the power steering, but i dont know where the problem is if it's the whose or the pump :/
Hello, is it the same pump on the Altima 2007 3.5 V6 ?
What belt size if i just want to bypass the powersteering pump
This must be the four cylinder because it was not this much free space when I did my v6