Thank you for Doing this Model .. As my window regulator just snapped while closing my window.. 10 am this fine morning! Now i know what to do .. THANK You 10/10
I found this video a good guide to replacing the rear driver window regulator on my 2010 Silverado. I highly recommend buying the plastic trim tools to remove the door panels. It saves wear on the panels themselves. Excellent instructional film. Only found a few differences but it was easy to do following the video.
+Aubrey Prestridge Thanks for watching. If any of our viewers needs to make this repair we carry the replacement part shown in this video on our website. Here's a link to them www.1aauto.com/1A/WindowRegulators/Chevy/Silverado1500/1AWRG01064?TH-cam&CTA%20Comment&ATony
Excellent video. Straight to the point. Made it extremely easy. Usually all makes and models are typically the same process. But there is differences with certain cars, trucks.. more of where bolts are located. Thanks for the video.
+JOEFLO Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
+6DUBD Dillidnger Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
I bet you had one bolt left over ! The 10 mm bolt to the immediate left of the window motor ( which secures the motor to the door frame) didn't get put back on reassembly. Excellent video though - clearly illustrated ...... I gotta tackle this exact job on the weekend !!! Thanks !!!!
Thanks for the detailed video! Sucks that I didn't purchase my regulator/motor from 1A auto cause mine didn't come with bottom studs like the factory one did.
My drivers side window will not go up or down. Replaced all 4 power window switches. Problem not resolved, and all other windows work. Any suggestions?
On 03:15 taking the door handle cable out, the metal dycast half ring that it fits in broke. Where would I find a replacement for that? Or is it a important part?
So I had new actuators installed on both my driver and passenger door last week. After it was fixed, I was going down the road and went to roll my windows down and when I rolled my passenger window down the door came unlaced and opened. How do I fix this?
Hey I’m here because I just bought from you guys a window regulator for my 2010 GMC Sierra. It came yesterday, and I installed it. But my it won’t go up or down am I doing something wrong? My old motor was working okay before I installed the new on. I thought it might be my window switch but I also tried with the master switch from the driver side all I hear is a click noise but it doesn’t go up or down. Pls help me
+P G Thanks for watching! We recommend that you double check the install was done properly and that all switches/wiring is in good condition. If you believe there is an issue with the part itself, please contact our customer service department right away and we can provide you with a suitable solution!
My switch makes a buzzing noise when I press the window up or down. I thought it was the switch so I replaced it same noise. Is the regulator my problem?
@@1AAuto hey thank you for replying but yall did have a video for it. It was a 09 Chevy Silverado and i was able to get it done perfectly by following yalls vid. Ty
+Jorge Ortiz Thanks for watching! Unfortunately we do not have the specs for all the bolts with the corresponding location, so it will have to be trial and error! 1aauto.com
(2007 Silverado 1500) Both rear windows will not work from either of the back switches or the drivers side switch. I can hear them click, but no movement. Thoughts?
If there's power going to the window motor(s), it may be a bad window motor. We carry new power window motor regulator assemblies for your 2001 Chevy Silverado 1500 on our website, we also offer free shipping on all orders in the lower 48 sttaes. Here's a link to them. Hope this helps you out. www.1aauto.com/2007-chevy-silverado-1500-window-regulator/y-mo-c/2007-1716-16?TH-cam&TH-cam&ATony
+ADIT ADDICTS Thank you for checking us out. The configuration would be separate as in 2007 they re configured the doors and body. Please view our video for the 2000 body style using th-cam.com/video/6q_ksIGOPKk/w-d-xo.html
You may want to test the power going to the window motor with a test light or an ohm meter, to see if there's power going to it when the switch is pressed in both directions. If there isn't, the window switch may be bad, or there may be a break in the wire on that circuit. You may also want to check the wire harness that runs between the door and body of the vehicle for a frayed or broken wire. Hope this helps you out. 1aauto
+Ralph A. Hutchison Thanks for watching! If the window is stuck down and you have to replace the regulator, you can always just cut the cable. As long as you have the new, correct part in hand cutting the cable will free up the window.
is it possible to convert my 2008 ext cab w/t into electric regulators both windows and locks using factory parts that way it looks original mine r manual
+Jesus Salinas It may be a little involved. You might want check a few automotive forums for your vehicle to see it this is possible. Hope this helps you out. Best Regards, 1A Auto
POOR and I mean POOR video. You are not showing a lot of parts. My window is connected to the arms, here you do not show it at all. My window is stuck in the down position
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Absolutely cannot thank you guys enough for this video. So easy to follow and I completed this job on my 2013 Silverado in an hour. Thank you!!
+@BBrown-yn9qp Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Brilliant!! Watched the video, ordered the part, and then did the install in under an hour. Thank you.
Damn fast shipping
Thank you for Doing this Model .. As my window regulator just snapped while closing my window.. 10 am this fine morning! Now i know what to do .. THANK You 10/10
I found this video a good guide to replacing the rear driver window regulator on my 2010 Silverado. I highly recommend buying the plastic trim tools to remove the door panels. It saves wear on the panels themselves. Excellent instructional film. Only found a few differences but it was easy to do following the video.
+Aubrey Prestridge Thanks for watching. If any of our viewers needs to make this repair we carry the replacement part shown in this video on our website. Here's a link to them www.1aauto.com/1A/WindowRegulators/Chevy/Silverado1500/1AWRG01064?TH-cam&CTA%20Comment&ATony
Excellent video. Straight to the point. Made it extremely easy. Usually all makes and models are typically the same process. But there is differences with certain cars, trucks.. more of where bolts are located. Thanks for the video.
+JOEFLO Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Wow have a 2500hd, this was right on the money. Hade whole thing done in 20 minutes. Great video, great product!
+ryan schwartz Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Y'all made it look easy I'm gone give this a shot in the morning thanks in advance
+6DUBD Dillidnger Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Just finished installing very easy as all have said. Thank you for a great video.
Thanks For your information regarding Windows panel.
I did it my self ❤
Excellent video. Thank you. In my case, the bolt that attaches near the regulator motor will not release. It just spins. Any suggestions?
I bet you had one bolt left over ! The 10 mm bolt to the immediate left of the window motor ( which secures the motor to the door frame) didn't get put back on reassembly. Excellent video though - clearly illustrated ...... I gotta tackle this exact job on the weekend !!! Thanks !!!!
is this the same procedure (+/- ) a few minor steps to replace the window?
Excellent job on the video! Thank you! Nelson
Can this regulator be used in the conversion of my manual crank windows? 2010 gmc sierra 1500 single cab.
Thanks alot,, very helpful and thorough.
Thanks for the detailed video! Sucks that I didn't purchase my regulator/motor from 1A auto cause mine didn't come with bottom studs like the factory one did.
+Lsx Steven Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I just bought the one from 1a auto, no factory studs haha. Now what
Great video got it done!
Hello. My motor sounds like is still working and the class is up, do we still change the whole set up new? Thanks
Thank you so much for your videos
What’s tha metal plate bracket with the 3 10mm bolts name I need tha part thanks
Great tutorial . Thanks
+Jesse Lopez Thanks for checking us out! 1AAuto.com
My drivers side window will not go up or down. Replaced all 4 power window switches. Problem not resolved, and all other windows work. Any suggestions?
2o1o gmc 1500 door Handel in or outside will not release door
Well done video made my installation a breeze. 👍
+1hotc Thanks for checking us out. 1aauto.com
You dont show the "clip" that holds the door release on very well. I dont know how to remove it
8 min in >> th-cam.com/video/-leBc3yBXnY/w-d-xo.html
On 03:15 taking the door handle cable out, the metal dycast half ring that it fits in broke. Where would I find a replacement for that? Or is it a important part?
Is it the same as the 2500 z71 trim?
Great video I followed step by step worked out perfect!
+Lazy Walking P Thank you for your positive feedback! We are happy we could help.
I ordered the passenger side will it work on driver side
+Joey Farr Window regulators will not fit on the opposite side they are made for.
So I had new actuators installed on both my driver and passenger door last week. After it was fixed, I was going down the road and went to roll my windows down and when I rolled my passenger window down the door came unlaced and opened. How do I fix this?
Hey I’m here because I just bought from you guys a window regulator for my 2010 GMC Sierra. It came yesterday, and I installed it. But my it won’t go up or down am I doing something wrong? My old motor was working okay before I installed the new on. I thought it might be my window switch but I also tried with the master switch from the driver side all I hear is a click noise but it doesn’t go up or down. Pls help me
+P G Thanks for watching! We recommend that you double check the install was done properly and that all switches/wiring is in good condition. If you believe there is an issue with the part itself, please contact our customer service department right away and we can provide you with a suitable solution!
My switch makes a buzzing noise when I press the window up or down. I thought it was the switch so I replaced it same noise. Is the regulator my problem?
+Doomsday51225 It could be the window motor/regulator. Thanks for checking us out!
Do yall have a video for the back passenger or driver windows regulators?
+Stephen Guerra What is your year/make/model? We can take a look!
@@1AAuto hey thank you for replying but yall did have a video for it. It was a 09 Chevy Silverado and i was able to get it done perfectly by following yalls vid. Ty
+Stephen Guerra Thanks for checking us out! 1AAuto.com
Not all years are the same
so I removed the screw(bolts) but I got them all mixed together. How can I find out what the length of the bolts are?
+Jorge Ortiz Thanks for watching! Unfortunately we do not have the specs for all the bolts with the corresponding location, so it will have to be trial and error! 1aauto.com
(2007 Silverado 1500)
Both rear windows will not work from either of the back switches or the drivers side switch. I can hear them click, but no movement. Thoughts?
If there's power going to the window motor(s), it may be a bad window motor. We carry new power window motor regulator assemblies for your 2001 Chevy Silverado 1500 on our website, we also offer free shipping on all orders in the lower 48 sttaes. Here's a link to them. Hope this helps you out. www.1aauto.com/2007-chevy-silverado-1500-window-regulator/y-mo-c/2007-1716-16?TH-cam&TH-cam&ATony
Is this window configuration basically the same as a '00 Silverado 2500?
+ADIT ADDICTS Thank you for checking us out. The configuration would be separate as in 2007 they re configured the doors and body. Please view our video for the 2000 body style using th-cam.com/video/6q_ksIGOPKk/w-d-xo.html
1A Auto Parts Thank you!
So, the power buttons don't move my window down on the passenger side but do power it up. Is this a window regulator problem or just a button problem?
You may want to test the power going to the window motor with a test light or an ohm meter, to see if there's power going to it when the switch is pressed in both directions. If there isn't, the window switch may be bad, or there may be a break in the wire on that circuit. You may also want to check the wire harness that runs between the door and body of the vehicle for a frayed or broken wire. Hope this helps you out. 1aauto
Window stuck down.... how do I proceed?
+Ralph A. Hutchison Thanks for watching! If the window is stuck down and you have to replace the regulator, you can always just cut the cable. As long as you have the new, correct part in hand cutting the cable will free up the window.
@@1AAuto Thank you! I ultimately freed the assembly, got the clamps loosened, lifted the window and taped it. Good as new, thank you!
You forgot the cussing and throwing tools
is it possible to convert my 2008 ext cab w/t into electric regulators both windows and locks using factory parts that way it looks original mine r manual
+Jesus Salinas It may be a little involved. You might want check a few automotive forums for your vehicle to see it this is possible. Hope this helps you out.
Best Regards,
1A Auto
POOR and I mean POOR video. You are not showing a lot of parts. My window is connected to the arms, here you do not show it at all. My window is stuck in the down position
This regulator would be ok to work with 2012 LTZ model 1500?