Can Am - How to switch to Combined Speed and RPM on Your Gauge
ฝัง
- เผยแพร่เมื่อ 10 ต.ค. 2019
- Here's how you can change the gauge readout on your Can Am Quad to read both Speed and RPM. To change the personal onscreen message you have to plug the harness of the quad into a programmable computer. That can be done at the shop where you bought the quad.
- วิทยาศาสตร์และเทคโนโลยี
Took me years to find out this could even be done! Thank you! Easy peasy.
Hey, I am glad this video was helpful to you. I appreciate the channel support. God bless you.
Thnx mate, greetz from Holland
Thank you my friend. Happy New Year to you!
I think your going to have a lot of fun with that machine old mate. Esp if you get snow.
Yes, indeed. I'll be hauling firewood once I get a hitch and a cart. Around here we are quad friendly so you can ride safely along the roads as well as the trails. They want you to obey traffic rules, be registered and insured and wear a helmet. You can even buy tires designed for riding on asphalt but I won't be using the roads too much. I know people who don't own a car but have a quad or side by side. I'll be going in the country as well as doing some fishing.
Thank you!
You're welcome!
I have a 15 outlander 500 and no backlight on my guage, is this a setting on my guage I’m not pressing?
Thank you for your comment. This light is supposed to be on whenever the bike is on or running. the lights are LED I believe. The dealership, or anyone with a BUDS program can check on the lights for you. It is possible that the lighting can be swicthed on or off via the BUDS program. A quick call to your Can Am dealership should get you that answer.
What is the model of can am? I have DS450. I have not the fuel level info... Have any idea what could I do to get it ON?
My quad is a 2019 Can Am 450 Outlander XT DPS. Typically, the shop computer can set all these parameters. I think there may be an aftermarket way to tapping the computer system of the quad but it might be an expensive venture to buy the program unless you can get a cheat copy somehow. I suggest you ask the shop if that is a setting on your screen you can use. It is weird that they didn't tun it on so I think it may not be an option.
@@Tobinindustrial yeah i think the DS only has gasoline light. i just went to update my speedometer
But.. The Gas light is allways ON 😆 even it is full or empty
@@danilehti I understand. A sensor in the tank and a remote digital gauge could work but you may have to use another gas tank as I am unaware if the original has anything built in to plug into a digital gauge.. if you have any success, please let me know.
@@danilehti Ah, the sensor is stuck in empty mode. I am ussure how you could access that sensor but there shoud be a way.
How do you make it say stuff on the dash when you turn it on
That was programmed for me personally by the shop. They use a computer interface to plug into the computer of the bike.
How do you switch back to regular MHP ?
That, I believe is done at a shop with the computer interface that plugs into the bike. I also heard that there is a wire that you swap out under the speedometer unit that changes it from KMH to MPH. I would call a Can Am dealer and ask. I am in Canada so it was already set up for KMH when it was on the showroom floor.
Did u figure it out
How Can you change your dps?
Press the DPS button to change the levels
My speed is on the left and rpm on the right
Interesting.
ok
Hope that was helpful to you.
MPH A KM/H COMO?
Eso debe hacerse en el concesionario con el programa informático adecuado.
Estamos igual, si pudiste podrías decirme ?
I dont have those buttons
Must be a different model my friend
now if it would just read engine temp ;(
These engines get pretty hot as it is pretty much a snow mobile engine. I suspect they won't add a temp gauge so that your jaw won't drop every day. They are designed to run pretty hot but, you know what I mean... lol
Thanks for your comment my friend.
@@Tobinindustrial yeah bud. I had all these plans to add a temp gauge but gave up on it and just use the idiot light and limp mode. Thanks for the video on how to get the RPM/MPH setup.. I accidentally did it before and loved it but could never figure out how to get it set like that again.
Benim göstergemin yarısı çalışmıyor neden olabilir acaba yarısı ekranda çıkıyor hız ve km göstermiyor
Bir eklentiyle bağlantınızın zayıf olması veya devre kartı lehimlemelerinin bir kısmının soğuk lehimlenmesi ve ekranın yalnızca yarısının düzgün çalışmamasına neden olması mümkündür. Kesinlikle ilk önce devre kartına giden tüm fişleri kontrol ederdim. İyi şanslar dostum.
@@Tobinindustrial çok teşekkür ederim
@@Kubilay.666 Çok hoş geldin kardeşim.
@@Tobinindustriallehimlere baktırdım ölçüm yapıldı arızalı bişey çıkmadı hala km göstermiyor
@@Tobinindustrializin orada bu göstergenin fiyatı ne kadar acaba