Duuuuude! I have a 2015 650 outlander max. Always wondered where these were. Had you by my side as I tracked down all these with ease. Thanks for being the first to finally do a sensible video on this.
Stephen Bouchard yes I do, I have the can am storage box that clips in when the seats removed. It’s nice extra storage for some drinks or your wallet keys etc.
todd hurley it’s been a good machine. I’ve pushed it hard. Only problem I have had was over heating due to the rad clogging up with mud. Once I put on the rad relocate kit it’s been perfect
I like to use any marine grade grease. (Usually blue in colour) my crew does a lot of water crossings. But I’m sure any bearing grease you have would do the trick.
Might want to mention you removed the plastic panels at the front of bike, you always have those off or just for this video? I bought a tool specifically for removing those little button clips and they’re still a pain to remove even with the tool
Hey man....I'm requesting an engine oil/filter change video from you. I love riding my '18 Outlander 570 XT, but it's a pain in the ass to work on and I'm one of those anal old guys who don't like oil mess on my skidplates and engine block! thanks
Hey I trying to find someone who can fix my son atv.. He having a little problem with it. He have a 2018 can am outlander 570. It's not cranking right now. I think it might needs new sparks plugs changed and maybe new fuel pump.
Anyone else have problem getting the grease gun tip on the zerk below the gas tank? It fits on other side but won’t go in on one side, I’m filing down tip of my grease gun
Yes! if you have a heavy duty grease gun the tip will be too round and hit the bar. I had to use a tip from a smaller grease gun that was a smaller diameter
Duuuuude! I have a 2015 650 outlander max. Always wondered where these were. Had you by my side as I tracked down all these with ease. Thanks for being the first to finally do a sensible video on this.
Scott Peddle glad I could help!
FINALLY someone did a video on these fittings... Thanks!
Best video yet, no one wants to do this important procedure
Thank very helpful, got it all sorted out. Your video is better then the useless manual that came with the 4 wheeler.
Exactly the video i needed, my Outlander says thanks
Great video man, really help out knowing I didn’t miss any, thanks !
John MacLeod glad I could help!
Good video, now for the two u joint zerks I was told to only give them half a pump of grease so you don’t risk breaking the seal
Thank you bud this video was mad helpful Ben threw 2 sets of u joints
Thanks a ton man! My buddy and I greased our 450s for the first time today.
Great video bro, excited to do mine later.
Thanks for the video man, that's very helpfull.
Thiago Nascimento glad I could help!
Thank you so much for this. They showed me in about 2 seconds when I bought it and I didn't remember anything. How often are you supposed to do this?
Anyone have the diagram of where the spots are, or the manual itself? Grease and laptops or phones don't go well together... 🙂
If you struggle to line up the Zerk for the drivers side. Put in neutral and push forward a bit.
Good stuff 👍
There’s a hole inntne skid plate ti acces the rear prop shaft zirk
thanks , this was helpful, I missed a total of 4..LOL
Glad it helped!
Do you have a cover where the 2up seat sits
Stephen Bouchard yes I do, I have the can am storage box that clips in when the seats removed. It’s nice extra storage for some drinks or your wallet keys etc.
Did you get it from CanAm
Stephen Bouchard yes
@@OutlandyAndy do you have a link?
@@johnflaherty7700 part number is 708200255. Google search it 😊
A lot of owners learn to grease U-joints after they fail 😉
Hi. I just bough a new can- am 570 2up yesterday...have you had any trouble?? Thanks...
todd hurley it’s been a good machine. I’ve pushed it hard. Only problem I have had was over heating due to the rad clogging up with mud. Once I put on the rad relocate kit it’s been perfect
Thanks ..good to hear....@@OutlandyAndy
Any particular grease type or grade preferred or required?
I like to use any marine grade grease. (Usually blue in colour) my crew does a lot of water crossings. But I’m sure any bearing grease you have would do the trick.
@@OutlandyAndy thanks!
How often do you grease
Might want to mention you removed the plastic panels at the front of bike, you always have those off or just for this video? I bought a tool specifically for removing those little button clips and they’re still a pain to remove even with the tool
JeffSpicoliable mine doesn’t come stock with the panels. I believe it’s an 850 + feature.
Outlandy Andy ah k my 650 came with em, but it was a demo so not sure if it’s stock or not
Thanks man
Hey man....I'm requesting an engine oil/filter change video from you. I love riding my '18 Outlander 570 XT, but it's a pain in the ass to work on and I'm one of those anal old guys who don't like oil mess on my skidplates and engine block! thanks
How often is this necessary?
Jeffrey Milliken really depends on the type of riding your doing. I tend to do it after each ride where I’m going through deep water.
Hey I trying to find someone who can fix my son atv.. He having a little problem with it. He have a 2018 can am outlander 570. It's not cranking right now. I think it might needs new sparks plugs changed and maybe new fuel pump.
Anyone else have problem getting the grease gun tip on the zerk below the gas tank? It fits on other side but won’t go in on one side, I’m filing down tip of my grease gun
Yes! if you have a heavy duty grease gun the tip will be too round and hit the bar. I had to use a tip from a smaller grease gun that was a smaller diameter
@@OutlandyAndy I couldn't seem to find one locally, so my filing did work, it's ugly lol but it gets the job done now
Wow man. A professional would wipe the excess off
Your right a professional probably would
Wipe your old grease off 😂
No way can I find the front u joint zerk