ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Removing Interior on my 3rd gen Camaro - Part 1 of Interior Restoration Project
ฝัง
- เผยแพร่เมื่อ 16 เม.ย. 2022
- Interior project has started on my Thirdgen iroc-Z Camaro!
I will take you through completely removing the interior carpet, plastic trim panels, sun visors, headliner, seat belts, console, overhead console, front seats, rear seats, and shifter plate trim!
I would definitely put the overhead console back in. I think they’re super cool with the map light and the cheesy 80s set reminder
Thanks bud, yeah o do like it, if I use the other fiberglass headliner, I’ll have to cut a hole in it for it. Thanks for watching man!
Just inherited an 89, and I'm preparing to begin my rebuild journey. Your videos have been VERY helpful. I look forward to watching all of the related content. Thank you for posting!!!
Glad they helped! And thanks for subscribing and watching the channel!!
I have my 87 gutted at the moment, except for the firewall carpet and heater box. Nice to be able to see it, thanks for doing this.
Yes keep the over head console.
I think I am! Thanks for watching Melissa!
Finally got some time to binge your videos. This project will be really interesting! Awesome!
Thanks man for watching!!! I really appreciate that
Great job man. Can’t wait to see how the interior looks when it’s all done. Also, when you said you carpet was bad, my 3rd gen sat in a barn for 20 years and the mice went to town in it, a paint respirator was the saving grace though because it smelled awful lol
Thanks! Oh wow, okay you got me beat for sure 😂
So glad you finally decided to do this.
I’ve been dying to do this since I got the car! Thanks for hanging out on the channel!
@@FireballMullet
Can't wait to see it once it's finished.
Your cars gonna be so nice.
Love your channel and your very welcome.
Best wishes.
More 3RD GEN content AWESOME! By the way Keep the overhead console!
Thanks for the input! And thanks for hanging out on the channel!
Looks great stan. This reminds me when I stripped the entire interior including dash and pressure washed the whole interior to get ride off mouse and other critter stench.
Oh wow! Yeah man, it’s nice to just start bare bones sometimes.
@@FireballMullet yes sir.
When i got my 82 Camaro in July 82 they had a recall notice within a year to add washers to the rear seat seatbelts attachment bolts
Thanks, I’ll look into adding some. Makes sense to have them.
3.99k sub. One more to go .Can’t wait to see the finished interior.🔥
Thanks for supporting the channel! I really appreciate that!!
Looks like a hell of a lot of work, all the little things that you must keep track of. But it is going to look so good with all of that new interior, and yes I vote for the overhead console, it just looks good with all of the gadgets and all. Can't wait to see it finished, thanks for sharing all of this small tedious work with the world. Have a great day my 3rd gen brother.
Yeah, I just bought a complete interior screw/bolt kit so I was kind of nervous losing them and trying to figure out where they go back in at. Thanks for hanging out on the channel!!
My 82 sport coupe has an extra unused wire in the console that was used for an optional clock. Orange wire circuit 40 same as cigar lighter. Used this to power cb radio eons ago
Yep! I know that circuit! Thanks for watching!
Looks great! I can't wait to see your interior finished! Your interior is going to set the bar high!
Thanks Justin! I am hoping it turns out nice, it really is a pia LOL to get it right. Thanks for watching!
Interested to see what your going to do plastic panels
Great video, floors look great, I remember (and took pics) when I pulled my interior out how pleasant it was to see clean rust free floors, that is the "key" to a wonderful build. And IMO I would keep the upper console, it is part of the charm of the car, maybe upgrade if possible the bulb and battery,
Great tip on the battery! Yeah, it is always scary to pull the carpet not knowing sometimes. This car has zero rust anywhere. I think I am keeping the upper console after all the comments, I may do something interesting with it though. BTW, congrats on being one of the top commenters on this channel!!!
I love the idea of the overhead console, but I have never liked the look very much. I just put my neutral safety switch on my 4th gen pedals. Pain in the butt, but it's straight forward. I got the switch and plug from Hawks with the Magnum-F swap kit. Original GM part, good quality! Good luck!
Was there a circuit under the dash? I wasn’t sure if I needed to use the one by console and extend
@@FireballMullet you can do it under the dash. However, someone hacked in an alarm system with my wires under the dash, so I just cut the yellow and purple wires at the shifter plug, extended the 10 guage wires to the clutch sensor, and called it good.
@@damianmize2842 oh perfect, thanks again man!
I just bought a 1986 Iroc and I have to strip all of the wiring out of the interior and redo everything.
Oh dang that is a job lol. Just take a little at a time, keep me posted!
Hey there Stan. Small interior bolts are 7mm or 9/32" sae. I have the interior gutted in my 89 GTA for the time being, so it's enjoyable to watch you do yours! Love your car!
Thanks Michael! I really appreciate you watching the videos!!
That makes 2 of us. I have my interior gutted as well in my 91 GTA. Doing the Killmatt and speaker install plus restoration of interior plastic, headliner, and seats.
@@chrismathews4478 awesome man!
I remember those silly plastic screws on my 86 IROC LOL
Man, I’m not a fan of that design lol 😂
There is a guy who makes a home link setup that replaces the flashlight in the overhead console.
Oh that is pretty cool, I have been trying to think of some useful things to mod it… thanks for the info
I am currently doing the headliner in mine. I plan on putting just the overhead light in and do custom light strips that "outline" each ttops and run two switches for each side if that makes any sense.
Yep! That sounds really cool! I have been thinking how to get some led lighting accents too! That sounds cool!
@@FireballMullet Glad you like the idea. Can't wait to check out the video, if you decide to do something like this. Good luck with the car!
What kind of backing are you getting on the new carpet? Can't wait to see the finished interior
the upgrade was called mass backing (it’s a thick vinyl) and also got jute padding separated
Idk man the overhead console is cool only because of the map light, I bet it would look super slick if it was deleted/ replaced with just a light only
That is what I was thinking also. Maybe I’ll figure out how to do something special with it, I don’t know. Thanks for the input Zach!
@@FireballMullet can’t wait to see the result 🤙
Honestly, the overhead console clashes with your primary interior colour. I'd lose it if you plan to stay with the Beechwood.
Yeah I can totally see that! Good eye!
Hey, I have a 1985 z28 that I just bought. It had a 305 and the guy swapped in a small block 400 out of a 1983 Chevy truck. It has the factory manifolds on it and the car has its factory 5 speed. Does anyone know of a company that makes an affordable header that works with the 5 speed because every manufacture I have looked at only makes them for the auto car?
Hit up Walter Racecraft, Matt should know how to help you find the right setup that should fit.
What’s the silver canister in the place where the spare tire goes?
I have the ridetech air suspension tank and compressor there.
New subscriber here, fellow IROC owner myself. Where did you get the leather 5th gen seats and were they easy to install? I'm wanting to do new interior on mine as well. Nice car!
Welcome to the channel! The seats take custom brackets, a bit dry in f like is selling those now. Check out my video on installing them.
"A bit dry in f like" what does that even mean?
@@terrenceneidig9725 I fat fingered that terribly, sorry about that. I meant to say “ a buddy of mine is selling the adapter brackets now”. If you look at the description on my 5th gen seats video, I have his info on there. Sorry for the confusion.
Keep the overhead console, also it’s this an old video?cause I remember you have the 5th gen seats
Yep! Seats are in the shop getting redone 👍
Is that a air suspension ?
Yes it is, Ridetech Air Suspension
Ah nvm