⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Hey guys I have a 4 cylinder 320i E90 I'm told there is an upstream & a down stream sensor do have video for that model all the videos you have done have been really great Cheers
I have a 2011 328i E92 and replaced my O2 sensor bank 2 using your video. It was difficult to get to but I saved over $600 doing it myself. Thank you for all of your videos!
The hardest thing was removing the two bolts holding the metal clip on....other than that quite easy and also my new Bosch oxygen sensor came supplied with anti-seize already applied to the thread.
Thank you for the videos. I have a 2010 328i E90 N51 Sedan. Are the bank 1 and bank 2 sensors the same but different lengths. I'm trying to find the correct part numbers to order for both Bank 1 Sensor 1 and Bank 2 Sensor 1.
I have a 2008 BMW 335i and that is definitely not where either of my O2 sensors plug in when you show the gray one. In face the valve cover doesn't look anything like mine, either. I'm guessing you have a 2011+ N55 ("twin-scroll, not twin turbo) engine here which is different from the 2007-2010 N54 engine (twin turbo)
I removed mine by letting th coolant reservoir.moving it forward. Grabbed it with some vise grips. Extended the arm. By adding an socket an an extention to the socket.
Hello, I have a question what are the two sensors in the front of the block? Not the intake and exhaust camshaft sensors. But the two that are center location if block front side
Hello please need help my EMERGENCY BRAKE ACTUATOR HAS NO POWER the gear is fine I checked already and B1S2 is code p0050 on 2008 BMW 750i ?? Thank you
Why didn’t you just jack up the car and tested the oxygen sensor in the back through the holes? This is literally over kill. Either way, it’s a good video.
What kind of codes do you get when the sensor is bad? I am getting a bad sensor plus 4,5,6 cylinder misfire codes. Would it be the sensor or could it be something else?
Ive had the exactly same issue, the problem is the oxygen sensor bank 2 sensor 1, after you replace it you might have to replace these three spark plugs as well soecially if you see black carbon on it, and car will drive fine
As always the best thank you , if i can subscribe again i will do it!!!! help to read code, 2007 525i 153000 miles, Code P2098 post catalyst fuel trim system too lean bank 2 Code P2272 o2 sensor signal stuck lean bank2 sensor2 Code P0597 thermostat heater control circuit /open Please what do I need to do, thank you in advance
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Hey guys I have a 4 cylinder 320i E90 I'm told there is an upstream & a down stream sensor do have video for that model all the videos you have done have been really great
Cheers
I have a 2011 328i E92 and replaced my O2 sensor bank 2 using your video. It was difficult to get to but I saved over $600 doing it myself. Thank you for all of your videos!
Where is located the bank2 sensor 2 on 2011 328i xdrive please?
@@MiguelLopez-rh9mt bank 2 believe it’s the one on bottom up catalytic converter if not mistaken
Thanks for all you do, on this channel. You’ve saved me a ton of money on repairs.
This was helpful. Thanks. Plan doing a downstream vid?
You guys do a great job in explaining all your videos. Very much appreciated! 👍
Thanks a lot guys! this video helped me change my own oxygen sensor on a N53 engine!
Are you guys in soCal by chance? If you have a garage where are you guys? Your bmw videos have saved me $$ appreciate it
The hardest thing was removing the two bolts holding the metal clip on....other than that quite easy and also my new Bosch oxygen sensor came supplied with anti-seize already applied to the thread.
What's the point of the metal clip anyway? Can't I leave it off and route the cables elsewhere? It's ridiculous
@@HydroxLoL id be lying if i said heat shielding lol
@hydrox I'm definitely trying to find out the same thing about bypassing that bracket...!
Where did. But It ?
Can you please do a review on those aftermarket front headlights ?
great videos. do you have link on how to check o2 sensors
Thank you for the videos. I have a 2010 328i E90 N51 Sedan. Are the bank 1 and bank 2 sensors the same but different lengths. I'm trying to find the correct part numbers to order for both Bank 1 Sensor 1 and Bank 2 Sensor 1.
I have a 2008 BMW 335i and that is definitely not where either of my O2 sensors plug in when you show the gray one. In face the valve cover doesn't look anything like mine, either. I'm guessing you have a 2011+ N55 ("twin-scroll, not twin turbo) engine here which is different from the 2007-2010 N54 engine (twin turbo)
Do you not after calibrate a new oxygen sensor ?
Thanks guys
I have a 2009 BMW 323i E90 N52 2.5L....does it only have 2 Oxygen Sensors?
thanks guys! helpt me out a lot of frustration! :D
Are the o2 sensors under the car before the cat and top after the cat or vice versa?
How many catalytic converters have a bmw 328i 2008
2
thank you for this presentation it was very helful
Thank you you truly help me alot
Hey thx a lot for making this video...it was a big help when i did my sensors...thumbs ☝
Did you remove something before removing the heath bracket? Mine has something in the way.2007 328xi
that was a precat o2sensor for bank 2 right? We need to jack up the car to replace a post cat sensor for the bank
these videos are helpful. Can this fix a e92 U1167 code or do you have a video that explains this code?
Hi God Bless You. Can you tell me exactly where can I find bank 2 sensor 2 on bmw 328i 2011 please
Yeah thank you very much 👍🏻👏
So I diagnosed my bmw e90 with just a cheap OBD reader and all it says is bank 2, is the sensor in the video the one I need to replace?
Excelente explicación
can you show on E60 530i n53 ? its little bit different tho
GOAT!
I removed mine by letting th coolant reservoir.moving it forward. Grabbed it with some vise grips. Extended the arm. By adding an socket an an extention to the socket.
What model and engine do you have?
do you know the part number for bank 2 o2 sensor on a 2011 bmw x3 f25?
Will this work on a 335i 2007?
So helpful!
This video appears to be for the N52/N53 motor. This would not work on a N54 motor, there just isnt sufficient space to access the O2 sensor.
Hi guys, good video!!! Can you do a PCV Valve video??? How to replace it? Thanks
This would be the same problem? I have bank 1 bank 2
Do you have to put back that blasted BRACKET!??
At least in mine I had to. It would throw check engine light without it every 3 miles
@@Minto107which model and engine do you have?
@@TermsAndConditionsApply 2005 330i N52A
Hello, I have a question what are the two sensors in the front of the block? Not the intake and exhaust camshaft sensors. But the two that are center location if block front side
There's all relating to oil and vanos if your car dies but starts up evertime those the ones to clean
Thank you.
i have a bmw x5 2008 4.8i v8 i have a xoxigen sensor 2 bank2 ho do i change that
Hey is this the same as bank 2 senses 2
so i kind of removed both sensors and dont know which one plugs into which connector. please help
What part is this? I do not want to order ther wrong part , for bank 2
Hello please need help my EMERGENCY BRAKE ACTUATOR HAS NO POWER the gear is fine I checked already and B1S2 is code p0050 on 2008 BMW 750i ?? Thank you
How would you do this on the n51 engine?
Same
The rear upstream sensor is a pain in the neck to get to
for the star 8mm can i use regular 8mm socket on the bracket
don't think so. You could strip it
Might get away with using a spline socket though
Why didn’t you just jack up the car and tested the oxygen sensor in the back through the holes? This is literally over kill. Either way, it’s a good video.
This is the comment I was looking for lol. I was like wtf why all of this ?
I have had code P0138 is the problem ?
What kind of codes do you get when the sensor is bad? I am getting a bad sensor plus 4,5,6 cylinder misfire codes. Would it be the sensor or could it be something else?
Coils spark plug first clean vanos and an other sensors around there first see if the oil is flowing smoothly by cleaning all 4 sensor .
@@abumannocchi7636 my dme msd80 was bad. I replaced it with msd81 ($600 from ebay programmed)
Ive had the exactly same issue, the problem is the oxygen sensor bank 2 sensor 1, after you replace it you might have to replace these three spark plugs as well soecially if you see black carbon on it, and car will drive fine
The oxygen sensor have to be from the BM.W
Can it make a car not to start?
damn it, why do the things i need to fix always in hard to reach areas.
So what was the problem with the o2 sensor
ummm it was bad
where is bank 2 sensor 2 ? I have a P0156 code for sensor 2, bank 2
After the passenger cat
Informative! Thank you my friend! We are interested in collaboration with you. email? Thanks - Eli
These 2 wires started on fire now my car won’t start lol….
i wish i could get google translate to change his voice...
Why ?! You no like a Mr. Borat ?! 😂😂
As always the best thank you , if i can subscribe again i will do it!!!!
help to read code,
2007 525i 153000 miles,
Code P2098 post catalyst fuel trim system too lean bank 2
Code P2272 o2 sensor signal stuck lean bank2 sensor2
Code P0597 thermostat heater control circuit /open
Please what do I need to do, thank you in advance
I have the same code in my bmw can you tell me what it is
You could at least give a lenght of the sensor . Or you a type of mechanic that replace oxygen sensor by original part number only :DDD