Great job 👏 the only gun tuber who has something on Paul Harrell! Excellent presentation, perfect volume visual and voice with no BS. Great PCC and I have both this and the PMR 30. 22mag is underrated underestimated round and you can carry both with lots of ammo for the weight of 1 9mm pistol and half the ammunition
The thing is a gun THAT expensive shouldn't have so many specific procedures! You shouldn't have to baby the shit out of a $700 gun! Are you kidding me?
@@reliablethreat23brother you shouldnt own guns if your to stupid to understand they're machines built in specific parameters. Dont buy anything with an adjustable gas system it may give you a mental breakdown.
@@reliablethreat23 Yeah I don't know what world you live in, but this is pretty simple. There are far more expensive guns that are more delicate and more complex
Have the CMR30 for about 2 years now. Only additions are a vertical forearm grip, a muzzle brake that directs the blast forward and a 4 -9X short scope. Love the gun. Mainly shoot Federal Game Shok 50 grain offerings. Also like my P17 after adding the KelTec slide w/optic. All the best! "The JJ" SW Penna.
I own the CMR 30, PMR 30, CP 33 and Sub 2000 2nd gen 9mm Glock mag variant. The CMR 30 has been nearly 100% with only minor ammo related reliability issues. The PMR 30 has been almost as reliable, but there have been a few jams here and there. The CP 33 has been a jam-o-matic I must admit. I was so happy to get one after owning the other two .22mag's but it's rare it can finish a single mag (maybe never) even when loaded with the good ammo from CCI. I only feed it 40gr +. It's sad because I really wanted to like it. The Sub 2000 has never malfunctioned. I haven't shot it as much, but I haven't a single hiccup with the SUB 2k. The CMR has maybe 1000ish through her, and PMR maybe 500ish for reference. These girls get DIRTY! An air compresser is a big help in the cleaning process ;)
Why? 22 mag is not much less in some cartridges and much much less expensive. It’s a great shooter and 22 mag is nothing to laugh about. If it was in 5.7 it would shoot and feel the same but just cost so much more to shoot
@@eagleyedye2070 I know the differences are marginal for civilian purposes, but I'm an MP7 fangirl and this is as close as I'd probably get, lol. Aside from that, I'd love to see more firearms in the 5.7 ecosystem, as increased adoption would likely help to equalize the price of the ammunition and exposure to the round a little bit.
I had one of these joyed it very accurate almost a perfect truck gun but I noticed when you put more than 25 rounds in one of the magazines, the magazines would bulge at the sides. Try to talk to the manufacture to see if I could get metal mags never got an answer would buy again with modifications
And also an extended mlok rail that's metal. Haga Defense makes some but I'd rather have metal. And stuff and things make extended mags, but they don't seem to be great.
Does KelTec have any plans on making this item in a strictly pistol configuration? or the Cp33 in .22 MAG? love the .22mag but want it in a non reciprocating slide format.
@@trynagetbanned8483 I think he meant a large format pistol. As in the cmr30 with a shorter barrel. I think it would be much better in a more compact bullpup design but the magazine would have to be resigned so idk if that would work well
Great job 👏 the only gun tuber who has something on Paul Harrell! Excellent presentation, perfect volume visual and voice with no BS. Great PCC and I have both this and the PMR 30. 22mag is underrated underestimated round and you can carry both with lots of ammo for the weight of 1 9mm pistol and half the ammunition
It's pretty obvious that many of the people who make complaints about the guns, don't follow the instructions.
The thing is a gun THAT expensive shouldn't have so many specific procedures! You shouldn't have to baby the shit out of a $700 gun! Are you kidding me?
@@reliablethreat23brother you shouldnt own guns if your to stupid to understand they're machines built in specific parameters. Dont buy anything with an adjustable gas system it may give you a mental breakdown.
@@reliablethreat23 Yeah I don't know what world you live in, but this is pretty simple. There are far more expensive guns that are more delicate and more complex
I am thumbs up number 700. Surely that means I win a prize CMR30.
Love my CMR30 IN Titanium Cerokote!
Please make an extended magazine for this.
There is an extension kit available, don't know how it'll work. th-cam.com/video/RFmHZQDiWX0/w-d-xo.html
@@olegoat1110 thanks
Have the CMR30 for about 2 years now. Only additions are a vertical forearm grip, a muzzle brake that directs the blast forward and a 4 -9X short scope. Love the gun. Mainly shoot Federal Game Shok 50 grain offerings. Also like my P17 after adding the KelTec slide w/optic. All the best! "The JJ" SW Penna.
I love mine. The only thing I hate is how People who’ve seen it always want to touch it. 😂
I’ve never really cared about guns but I want this more than anything
I own the CMR 30, PMR 30, CP 33 and Sub 2000 2nd gen 9mm Glock mag variant. The CMR 30 has been nearly 100% with only minor ammo related reliability issues. The PMR 30 has been almost as reliable, but there have been a few jams here and there. The CP 33 has been a jam-o-matic I must admit. I was so happy to get one after owning the other two .22mag's but it's rare it can finish a single mag (maybe never) even when loaded with the good ammo from CCI. I only feed it 40gr +. It's sad because I really wanted to like it. The Sub 2000 has never malfunctioned. I haven't shot it as much, but I haven't a single hiccup with the SUB 2k. The CMR has maybe 1000ish through her, and PMR maybe 500ish for reference. These girls get DIRTY! An air compresser is a big help in the cleaning process ;)
Love both my kel tec pistols ....
If y’all made this in 5.7, I’d buy one in a heartbeat!
Also, an extended mag for this would be fantastic.
Why? 22 mag is not much less in some cartridges and much much less expensive. It’s a great shooter and 22 mag is nothing to laugh about. If it was in 5.7 it would shoot and feel the same but just cost so much more to shoot
@@eagleyedye2070 I know the differences are marginal for civilian purposes, but I'm an MP7 fangirl and this is as close as I'd probably get, lol. Aside from that, I'd love to see more firearms in the 5.7 ecosystem, as increased adoption would likely help to equalize the price of the ammunition and exposure to the round a little bit.
Just picked up one tonight🤘
I had one of these joyed it very accurate almost a perfect truck gun but I noticed when you put more than 25 rounds in one of the magazines, the magazines would bulge at the sides. Try to talk to the manufacture to see if I could get metal mags never got an answer would buy again with modifications
I use Amsoil products on mine.
38 grain bullets is the lightest I can get to run reliably
is there any chance that youll sell the short barrels again for people who want to SBR their CMR30's?
Man, I wish you had a CMR30 chambered in 22LR. CLR22? #wishlist
It exists, It's called the KelTec CP33.
Ever thought about a carbine chambered in 357/44 Mag or 38 spesh? 30 carbine is a relatively long cartridge... Just thinking
MAKE IT INTO A PISTOL VERSION WITH A BRACE, YOU WOULD CORNER THE MARKET WITH THIS DESIGN AND A SHORT BARREL
would love a bullpup version of this
If it were in 5.7x28 caliber, it would be very interesting
This my favorite gun in battlefield 2042
Wow. Would love this in 9mm
still waiting on on a 9mm version that can take glock mags- before you say sub 2000 gen 2- the aesthetics of the CMR are 10X better
Can you cut a inch or two off the barrel and call it a pistol so we can have it in New York!
I can not afford to move right now!
.22LR version pls
Grab an SU-22!
@@xkyox4945 no
@@the1andonlySherlock it's fun
@@xkyox4945 I'm sure it is, but 50 rounds is more fun
Try the PLR22
I wish i could find one of these's neat little carbines before canada ban's all semi Centre fire because we are ran by clowns.
this one appears to be a rimfire? Maybe its perfect hah
@@Yoobinlee neat
Couple still available at irunguns
Kel Tec, always tte Mad Scientist of the Gun Industry
Tactical varmint rifle.
And also an extended mlok rail that's metal. Haga Defense makes some but I'd rather have metal. And stuff and things make extended mags, but they don't seem to be great.
Steel lined extended magazines please!
Pozdrowienia z Polski moja zabawka spisuje się znakomicie z tłumikiem firmy A-TEC.
Does KelTec have any plans on making this item in a strictly pistol configuration? or the Cp33 in .22 MAG? love the .22mag but want it in a non reciprocating slide format.
The cmr-30 charging handle is non-reciprocating. Also, they do make a pistol configuration. The PMR-30
@@trynagetbanned8483 I think he meant a large format pistol. As in the cmr30 with a shorter barrel. I think it would be much better in a more compact bullpup design but the magazine would have to be resigned so idk if that would work well
Partner with Magpul to make a nice polymer shell upgrade for this thing
I'd pay for it
Battlefield 2042 Weapon
Can this also shoot 22lr and 22Mag
MP7 at home
Is there a shorter version without the stock?
it is a strait blade screw driver flat head is the description of a person who has a deflated scull.