It's good that these headphones could be opened without using destructive force. Many of the ones I have tried to fix have been glued and end up in pieces when taking apart!
It seemed you didn't finish soldering the support pads on the port? Nice fix. I have my headphones open and need to change the battery. It's fun to fix stuff.
you are right it is just needs a practice and there are some basic and important tips for soldering. we have to follow that tips for a professional work no need any training
What is the little circular thing dangling? Is it just completing the circuit? Mine is smaller and I am trying to make sure it didn’t detach from something when the charging port got pushed in. I don’t have solder but I used super glue but before I put them back together it looked like you shoved it in first and then put the green plate that holds the compnents on top of it. Was that just to fit or does it need to touch something specific?? Like does it toggle something I’m not seeing??
Great! [Blanches from embarrassment at how cheap these podcast-great speakers are.] How do the connectors go bad? I've seen gnarled spring metal connectors on HDMI, that's clearly a problem in mating connectors, but Micro-B connectors look about the same.
thanks for sharing
thanks a lot
It's good that these headphones could be opened without using destructive force. Many of the ones I have tried to fix have been glued and end up in pieces when taking apart!
yes dear
the press fitted and glued fittings are too difficult to open
It seemed you didn't finish soldering the support pads on the port? Nice fix. I have my headphones open and need to change the battery. It's fun to fix stuff.
Please what is the air flow and temperature when soldering with hot air gun and mechanic solder paste thanks.
on my WELLER WR3M rework station,
Air Flow setting is 90%
Temp 550 C
@@HaseebElectronics thanks for the response sir
liked and subscribed. i have 3 bluetooth audio devices with this problem. thanks!
Can you explain difference between low melt solder and regular solder ( leaded and unleaded solder) ant their use
Thank you
How dies charger circuit work?
Hey dude I have a pair of flip headphones I want to see if you can fix them how do I get in contact with you to fix them
you can contact whatsapp -00962-79-1161-084
gmail id ashraf4ta4
instagram id haseeb electronics
can you fix mine please
no problem i can do it
but if you will send to Jordan, its shipping charges are very very high
good HeadSet
yes it is nice design of headset
What is the name of the tool you used to blow hot air?
Amazing video dear friend, have a happy day!
best regards and special thaks
Does soldering just take practice to master or do you have to attend training schools
you are right
it is just needs a practice and there are some basic and important tips for soldering. we have to follow that tips for a professional work
no need any training
Always a pleasure and a learning experience.
it is my pleasure
What is the little circular thing dangling? Is it just completing the circuit? Mine is smaller and I am trying to make sure it didn’t detach from something when the charging port got pushed in. I don’t have solder but I used super glue but before I put them back together it looked like you shoved it in first and then put the green plate that holds the compnents on top of it. Was that just to fit or does it need to touch something specific?? Like does it toggle something I’m not seeing??
Great! [Blanches from embarrassment at how cheap these podcast-great speakers are.] How do the connectors go bad? I've seen gnarled spring metal connectors on HDMI, that's clearly a problem in mating connectors, but Micro-B connectors look about the same.
Is this possible to do on Razer Kaira Pros ... i have a donor pair that has a new chrging for my old one. How much does this service cost?
Wow excellent repair procedures thanks for sharing
thanks a lot
او بھائی اردو میں بات کیا کرو
او بھائی
اردو جا کر میرے اردو چینل
Haseeb electronics Urdu
پر سنو نا
ادھر کیا ڈھونڈ رہے ہو
او بھائی
یہ لو لنک اردو چینل کا
th-cam.com/channels/LRRH_M_0oW1oLTuUOsDXdw.html
y'all should get a professional to do this.the trouble shooter said the port could be dirty.but the set is new
sometimes there is compatibility issues
Dos soldering paste consists led for soldering
yes it is 63/37 ratio that means Lead is 37%
@@HaseebElectronics sir thank you kya ye online milega iam from Hyderabad
Beautiful work my brother 😍 give you big 👍 keep safe
Thank you so much 😀
good
best regards
Masha Allah, may Allah bless you
Jazaak Allah khair
Wow that's awesome excellent uploading the best Vlog super Like
Thank you so much
good
thanks a lot
Thanks, I will try mine.
realyy informative video
best regards and special thanks
Assalamualaikum wr wb semangat kak
thanks a lot
thanks for sharing
it is my pleasure
Beautiful Work My Brother Liked Very Much
Many many thanks
Good work thanks for sharing
thanks a lot
Stay blessed Bhai
Jazaak Allah khair
Very good informative. Thank you sir.
You are welcome
Lk 28 brother 👍👍👍
Many many thanks
nice job dear brother
thanks a lot bhai
8:01 Alhamdulillah watching full vlog 😍
thanks a lot
Good 👍🏻 information
best regards
nice job brother
best regards and special thanks
Good job 👍
best regards
👌👌👌👍
it is my pleasure
2025
slow down please.you talk too fast.