It's always an easy install when the headlights are sitting on the bench. Try installing them in a Jag F-Type and you'll need a curse jar sitting on the ground beside you and a fairly good size box of band-aids. I ended up owing the jar the price of the lamps and almost passed out from the loss of blood. However... once I finally wrenched them into the slots (The lugs are not the same size as the lugs on the 9005s) and twisted them to lock and turned the high beams on, I cursed again. This time it was a happy curse as in... I'll be GD!!!! These thing do light up the night. Flip the high beam lever and small planes started heading for my driveway.
My 2015 ford edge had the worst OE headlight bulbs ive ever seen on a car. I live in a rural area and they were so dim i was convinced they were going to get me killed one night. Switched to the new H11 and 9005 and omg what a difference! They turn nightime into day! Thank you Sealight i finally feel safer at night🙏
Thanks so much guys! I just bought a set for my high and low beams on a 1998 Saturn and yes it's 2021 LOL but it runs like a top and now I will be able to see like a cat in the night
What's the point in getting macho on a TH-cam comment section? They're not speedrunning installing lights; they're just showing you how to install them and having the lights out made for an easier setup. It's not a race. Sick truck, though.
you couldn't have made a clearer, easy to follow video Sealight! I usually avoid Chinese made products and even if the product is ok, the instructions and documentation are usually terrible...but this is well done.
I know they are supposed to get hot, I saw a few LEDs that come with a fan in the back, is the light getting too hot going to be a problem in the future? Will it melt the rubber cover?
@@jovalleau this is what I thought, which is why I didn't understand why they even mention it. One headlight seems brighter than the other, I thought I must have installed it wrong...
My 2005 4runner 9005 high beams won't align properly, passanger side was vertical in the housing, but the driver side was at 45 degrees. I cant figure out what's wrong. Can I adjust the angle in the driver side somehow?
Similar issue here with a 2001 suburban. I see that they provide two sets of threads 180 degrees opposing one another, but that's basically worthless. I'm about ready to tap another set.
My car only has one light bulb for low and high beam, which bulb should I get I ordered the x1 I just got it in the mail hopefully it’s the right one I have 2019 Chevy trax
Your SPOPARC S1 headlights will not index to 3 & 9 o'clock on a 2022 RAM 2500, instead they install crooked beyond 4 & 10 o'clock. Do you have any model than will index properly on this truck?
Same thing happened with my '14 civic. I tried adjusting the locking ring, too, but there is only one hole for the screw to go in. They were sitting crooked and the beam pattern is shit. Had to put my Halogens back in the high beam slot. Not really sure what LED's will work, and every vehicle is a bit different. Pain in the ass!
I have purchase the X1 HB3 for my can-am renegade ATV for the low beam and after 1 week of use could'nt resist buying the second set for the high beam. They are bright, small, and the light pattern is near perfect on my vehicule. No fan expose so perfect for muddy / dusty use.
I just bought hi and low for my ram 1500. I was so happy with them for all of 2 min. Then thw drivers flickered and shut off following quickly the passengers went out too. I dont understand wtf is happening. If i tuen off my truck ans start it back up they turn back on again. Any insight?
You can not adjust the the angle since there is only one screw hole, so if u put them in and they are at 9 and 3 then ur golden, if not then you should return for a bulb that is adjustable
Once upon a time, it used to be so easy to change or upgrade headlight bulbs. You just take the original bulb to your nearest auto parts dealer and get the new bulb. With new technologies, this simple task has become overwhelming. In my 2017 Toyota Camry Atara SL (Australian Model), it has low beam headlight has an H11 Halogen bulb with projector housing and high beam headlight has an HB3 Halogen bulb with reflector housing. I am not sure why Toyota didn't have both as either reflector or projector housing. It also has parking light bulbs in wedge base housing. I simply want to replace the bulbs with a bit more brightness and whiter. I am so confused, I don't know which bulb to buy? I very much appreciate your help.
I have a ford escape 2013 and I checked every thing with the installation process, from correct bulb placements to connecting it correctly in the sockets, though upon turning the light on, it says "LOW BEAM LIGHT FAULT" how can you fix this and do I need a decoder as per manual?
Apologies for any inconvenience caused. The issue you're encountering might be related to decoding. Reach out to us on Facebook or Instagram, and we'll provide you with a decoder to resolve this promptly.
They don't clock properly on a 4th gen Ram 2500 FYI. Had to drill new holes (in the plastic ring) for the set screw so mine wouldn't blind other motorists. Bumped the install to 1.5hrs as it was a trial and error fitment. Be absolutely sure the lights work before modifying though!
Bought these for my 09 Acadia. It said they would fit. The h11s fit but when I went to replace my high beam (9005) it wouldn’t fit into my plug. The previous halogen says it’s a h7. What do I do?
I bought LED S1-9005 HB3 kit made by IRONWALLS FOR MY 2005 Toyota Highlander and they didn’t work. They looked exactly the same as in your video. I installed it where I have 9005 in day time running socket. They are positioned inside close to the grill on the car. Is it possible that +& - are marked wrong on them? Is it ok to try with reverse polarity?
I installed these on my 1997 Tahoe. Dispite the yellowed aged plastic Chevy headlight, the bulbs still are bright enough to make people flash their high beams at me. I did a Low/High all 4 on wiring, and with all 4 SeaLight LEDs going, there is no need for a light bar in dark mountains and rural nights. These are what your looking for
@@classicjag76 i aimed them at a wall as soon as i installed them. These are WAY brighter than halogen, and it would be cruel to have them out of adjustment
I am just having the same problem. They need to be 9 and 3 o'clock. Might have to clip them tabs smaller or kinda put them in an angle to kinda sorta get them tabs in, which i just learned
@@stevekinion4719 there are 2 small screws under the O-rings, I removed the srews, turned the bulb/ base to the left 45 degrees, so that when I turned another 45 degrees clockwise, the led will face 3-9 positions.
Doesn't line up straight on Mazda CX-9. I tried it all three ways and the only way it fits snug is with the wire facing down but the chips are 30° off vertical. If I try the method shown above, the bulb is loose and still crooked. Also, about the same brightness as the halogens they replaced. Only difference is color changed from orange to blue.
No brand makes these for the 99 to 03 that are adjustable...mine sit in a 1oclock and 7oclock postion and they cant be adjusted...ones i bought for my ram are adjustable with 2 set screws in small increments so i could get them in the 9 and 3 oclock postion...and my 99 silverados led are HORRIBLE cause they cant be adjusted...and i see blue dots all in front of me
I got the sealight scoparc 9005 for the 2010 honda insight. It looks great but my issue is that mine comes with a driver/heatsink, and my low/high beam has a headlight cover. Im worry putting the driver/heatsink in there with the cover close is going to melt and damage it.
I tried installing for my Hyundai Elantra unable to fit them. Th plugs my car have and the plugs sealights have are different.. need help.ordered from Amazon and in the website it says it is perfect to fit. It doesn’t work for my Hyundai Elantra GLSE
Okay I have a 2015 Kia Sorento. I bought these on Amazon. And it said it would fit my Kia. But the Kia doesn’t have these plugs. It’s the bare bulb and pins is there an adopter maybe I can get ?
After installing, the bulb is not positioned at 9 and 3. They're more like 11 and 5. Since there is only one way the bulb fits the housing, can anyone tell me how to remedy this?
Me too, and slots or not, they go in any old way. I ignored the way it faced and tried to match the slots. The wires came out at the bottom (unlike the video). Adjusted the height and the lights seem to have a reasonable coverage, so I will leave it like that. Nice and white and very bright.
Yeah, same exact problem (with the H11's), and no screwdriver came to adjust it (in either set). It looks like I will have to remove the o-ring as well, to even get to the only screw I can partially see. Installation videos aren't so much for the obvious stuff (wow, you reconnect the wiring!), but for the little unexpected issues such as this.
Just an update. The screw under the o-ring didn't help with adjustment at all. The bulbs are still oriented at about 11 and 5 (pass) and 1 and 7 (driver), so at least they look symmetrical, and they actually are still a decent improvement over stock.
i bought a combo set of H11/9005 sealight bulbs for my 2018 f-150 XLT and after opening the package there was no gloves inside very disappointed. From all other video i have seen the gloves came with them inside. SO WHAT HAPPEN????😠😠😠
I bought the high beam low beam set but the kit doesn't say which is the high and which is low, the bulbs look identical, called the support number and all i got some message in Chinese, if I had known this was a Chinese brand i never would have bought them, very frustrating!!! Should have been straight forward!!!
When calling their customer "support" after finding it impossible to get the 9005's lined up at 9 and 3, the lay this on me: "Oh, in the 2021 Ram you need to have them aligned at 6 and 12." Nowhere on their website or in the installation instructions...in fact, the "Customer Support" section is "Coming soon..." - completely blank. Returning ASAP.
If it does that you can get a free replacement. Go to there website. I had the same problem before and went to their website and talked to come person who worked there. You just have to send a picture/video to show the problem then they'll send you a new one with no cost nor shipping cost. They work amazing btw, love them
I beg to differ! They only suggest I go out and buy a Canbus to fix the flickering, no offer to fix, replacement, no offer to send Canbus they know works. It’s a known issue with cars that have the Driving Lights on the same power as the High-beam.
It all depends on the manufacturer of your vehicle. But usually. H11s are low beams and h10s are high beams or fog/driving lights. Look up your vehicle's specs before buying. PS, if you have clearance issues, get their version 2 ones, where they made the back end more compact like the OEM counterparts to make it fit in those tight spaces
This video was NOT helpful at all. Probably because I have to go under the hood to do what ever it was you were attempting to show in the video. Thanks for nothing.
My stock halogen bulbs are 9005, and I have scoparc 9005s, but they don't lock in like my oem bulbs... They just spin freely with no 'locking' resistance. When comparing to my old bulbs, these leds have locking nubs/hills like a 'T', while my halogens have nubs like a 'Y' if that makes any sense. Any help?
![ไข้ขึ้นเลย! เมื่อแฝดโดนจัดเต็มวัคซีนครบ2เดือน🤒 [cc] แดนแพทตี้ SS2 | EP.54 |](http://i.ytimg.com/vi/z2VHItnyyvY/mqdefault.jpg)
It's always an easy install when the headlights are sitting on the bench. Try installing them in a Jag F-Type and you'll need a curse jar sitting on the ground beside you and a fairly good size box of band-aids. I ended up owing the jar the price of the lamps and almost passed out from the loss of blood. However... once I finally wrenched them into the slots (The lugs are not the same size as the lugs on the 9005s) and twisted them to lock and turned the high beams on, I cursed again. This time it was a happy curse as in... I'll be GD!!!! These thing do light up the night. Flip the high beam lever and small planes started heading for my driveway.
That is a luxury car lol. Most are like 20 minutes or less.
My 2015 ford edge had the worst OE headlight bulbs ive ever seen on a car. I live in a rural area and they were so dim i was convinced they were going to get me killed one night. Switched to the new H11 and 9005 and omg what a difference! They turn nightime into day! Thank you Sealight i finally feel safer at night🙏
I just installed H11 fog lights on my 2016 Honda CR-V. It was very easy. It took about 10 minutes and they are a big improvement over the halogens.
Are they white?
@@mikeyz7065 Yes 6000K - 6500K
@@mikeyz7065they're black
I recently installed these Sealight LED bulbs on my 2018 Nissan Pathfinder (Low Beams & Fog) and they look great.
The H11s are the low beams right?
Is the wire supposed to be coming from the top of the bulb or down, or does it matter?
Just bought a set for my 98 Saturn and yes it's 2021 LOL I can't wait to put them in tonight!!!Almost 5 star reviews I heard
Thanks so much guys! I just bought a set for my high and low beams on a 1998 Saturn and yes it's 2021 LOL but it runs like a top and now I will be able to see like a cat in the night
Really easy to do when the lights are sitting on a damn table.
I’d like to see how quick this guys can install them on my truck.
What's the point in getting macho on a TH-cam comment section? They're not speedrunning installing lights; they're just showing you how to install them and having the lights out made for an easier setup. It's not a race. Sick truck, though.
you couldn't have made a clearer, easy to follow video Sealight! I usually avoid Chinese made products and even if the product is ok, the instructions and documentation are usually terrible...but this is well done.
I know they are supposed to get hot, I saw a few LEDs that come with a fan in the back, is the light getting too hot going to be a problem in the future? Will it melt the rubber cover?
it shouldn’t it’s got a cooling mechanism
2018 Jeep Renegade, best I can do is about 10/4, not 3/9. Any ideas? Good lights, just can't seem to get them to 3/9.
Looks easy when the Headlights are off the car 🤣
Right
Makes me want to beat the makers of the video with a wrench
I did this in 5 minutes😂😂 wym
If you can’t figure it out you probably shouldn’t be doing it
Mine was a 10 minute install. It depends on the vehicle. Most are pretty simple and straightforward.
So you install them at 3 and 9 but the sides of led are different does it matter which side is on the outside? Or will it only fit in one way ?
They will pretty much only fit one way.
@@jovalleau this is what I thought, which is why I didn't understand why they even mention it. One headlight seems brighter than the other, I thought I must have installed it wrong...
My 2005 4runner 9005 high beams won't align properly, passanger side was vertical in the housing, but the driver side was at 45 degrees. I cant figure out what's wrong. Can I adjust the angle in the driver side somehow?
Similar issue here with a 2001 suburban. I see that they provide two sets of threads 180 degrees opposing one another, but that's basically worthless. I'm about ready to tap another set.
My car only has one light bulb for low and high beam, which bulb should I get I ordered the x1 I just got it in the mail hopefully it’s the right one I have 2019 Chevy trax
Your SPOPARC S1 headlights will not index to 3 & 9 o'clock on a 2022 RAM 2500, instead they install crooked beyond 4 & 10 o'clock. Do you have any model than will index properly on this truck?
Same thing happened with my '14 civic. I tried adjusting the locking ring, too, but there is only one hole for the screw to go in. They were sitting crooked and the beam pattern is shit. Had to put my Halogens back in the high beam slot. Not really sure what LED's will work, and every vehicle is a bit different. Pain in the ass!
I have purchase the X1 HB3 for my can-am renegade ATV for the low beam and after 1 week of use could'nt resist buying the second set for the high beam. They are bright, small, and the light pattern is near perfect on my vehicule. No fan expose so perfect for muddy / dusty use.
I just bought hi and low for my ram 1500. I was so happy with them for all of 2 min. Then thw drivers flickered and shut off following quickly the passengers went out too. I dont understand wtf is happening. If i tuen off my truck ans start it back up they turn back on again. Any insight?
You can not adjust the the angle since there is only one screw hole, so if u put them in and they are at 9 and 3 then ur golden, if not then you should return for a bulb that is adjustable
I wish that’s what the website said. I bought into this 360degree adjustable lock ring and first bulb doesn’t hit 9 and 3 perfectly 🫠
Once upon a time, it used to be so easy to change or upgrade headlight bulbs. You just take the original bulb to your nearest auto parts dealer and get the new bulb. With new technologies, this simple task has become overwhelming.
In my 2017 Toyota Camry Atara SL (Australian Model), it has low beam headlight has an H11 Halogen bulb with projector housing and high beam headlight has an HB3 Halogen bulb with reflector housing. I am not sure why Toyota didn't have both as either reflector or projector housing. It also has parking light bulbs in wedge base housing.
I simply want to replace the bulbs with a bit more brightness and whiter. I am so confused, I don't know which bulb to buy? I very much appreciate your help.
Bought some for civic and yes got the right ones h11 and 9005 trying putting them in and they fit loosely in the housing
Use the rubber rings that come with set to make a more snug fit.
@@txboy1982 I found some thicker rubber rings and got them in
Which one is the high and low ?
I can't seem to find your LED bulbs that will fit my Chevy silverado 2020
Look on Amazon
Will my rubber boot fit over these led replacements?
I have a ford escape 2013 and I checked every thing with the installation process, from correct bulb placements to connecting it correctly in the sockets, though upon turning the light on, it says "LOW BEAM LIGHT FAULT" how can you fix this and do I need a decoder as per manual?
Apologies for any inconvenience caused. The issue you're encountering might be related to decoding. Reach out to us on Facebook or Instagram, and we'll provide you with a decoder to resolve this promptly.
Will these pass inspection?
Does any part of these lights get too hot where i have to worry about it burning other wires inside the light compartment on my buick encore?
They don't clock properly on a 4th gen Ram 2500 FYI. Had to drill new holes (in the plastic ring) for the set screw so mine wouldn't blind other motorists. Bumped the install to 1.5hrs as it was a trial and error fitment. Be absolutely sure the lights work before modifying though!
Projectors? I'm just having trouble getting them to "lock" in my 4th gen.
Bought these for my 09 Acadia. It said they would fit. The h11s fit but when I went to replace my high beam (9005) it wouldn’t fit into my plug. The previous halogen says it’s a h7. What do I do?
I bought LED S1-9005 HB3 kit made by IRONWALLS FOR MY 2005 Toyota Highlander and they didn’t work. They looked exactly the same as in your video.
I installed it where I have 9005 in day time running socket. They are positioned inside close to the grill on the car. Is it possible that +& - are marked wrong on them? Is it ok to try with reverse polarity?
Just installed mine 2011 sierra, both low bulbs were 90° off ...im bummed
Got these for 2018 Compass. Impossible to install unless you take out the whole housing
I installed these on my 1997 Tahoe.
Dispite the yellowed aged plastic Chevy headlight, the bulbs still are bright enough to make people flash their high beams at me.
I did a Low/High all 4 on wiring, and with all 4 SeaLight LEDs going, there is no need for a light bar in dark mountains and rural nights. These are what your looking for
maybe they need adjustment? You might see the road better but if someone crashes into you because you're blinding them, well that's no good.
@@classicjag76 i aimed them at a wall as soon as i installed them. These are WAY brighter than halogen, and it would be cruel to have them out of adjustment
Can you have the wire facing down from the LED rather then up?
Will this work in the 2013 lancer high beam ?
For 2018 ram 2500 the 9005 (high beam), LEDs do not face 3 and 9 o'clock. Is this an issue?
I am just having the same problem. They need to be 9 and 3 o'clock. Might have to clip them tabs smaller or kinda put them in an angle to kinda sorta get them tabs in, which i just learned
Same problem for 2017 Ram.
Great the the company doesn't reply to address our problems.
Did you find a fix or send them back??
I'm in this boat too. Any update?
@@stevekinion4719 there are 2 small screws under the O-rings, I removed the srews, turned the bulb/ base to the left 45 degrees, so that when I turned another 45 degrees clockwise, the led will face 3-9 positions.
Doesn't line up straight on Mazda CX-9. I tried it all three ways and the only way it fits snug is with the wire facing down but the chips are 30° off vertical. If I try the method shown above, the bulb is loose and still crooked. Also, about the same brightness as the halogens they replaced. Only difference is color changed from orange to blue.
Why is it wobbly?I mounted it several times.I have tried it yet at night.
No brand makes these for the 99 to 03 that are adjustable...mine sit in a 1oclock and 7oclock postion and they cant be adjusted...ones i bought for my ram are adjustable with 2 set screws in small increments so i could get them in the 9 and 3 oclock postion...and my 99 silverados led are HORRIBLE cause they cant be adjusted...and i see blue dots all in front of me
I installed these on my Chevy 2018 Colorado. wow they are bright!
What did your Colorado come with HID?
I got the sealight scoparc 9005 for the 2010 honda insight. It looks great but my issue is that mine comes with a driver/heatsink, and my low/high beam has a headlight cover. Im worry putting the driver/heatsink in there with the cover close is going to melt and damage it.
Buy a new headlight set on Amazon
I tried installing for my Hyundai Elantra unable to fit them. Th plugs my car have and the plugs sealights have are different.. need help.ordered from Amazon and in the website it says it is perfect to fit. It doesn’t work for my Hyundai Elantra GLSE
2014 Honda Accord with DRL running lights. Will this cause flickering?
Okay I have a 2015 Kia Sorento. I bought these on Amazon. And it said it would fit my Kia. But the Kia doesn’t have these plugs. It’s the bare bulb and pins is there an adopter maybe I can get ?
I have the same problem... did u figure it out?
@@hugogarzza8255 Yes and it's quite an easy answer. The problem is you bought a Kia. Get rid of Kia and problem fixed. You're welcome😎
Hmmmmm... Mine came with drivers, the ones in the video didn't have them.
2020 RAM low and high beams - look great!
After installing, the bulb is not positioned at 9 and 3. They're more like 11 and 5. Since there is only one way the bulb fits the housing, can anyone tell me how to remedy this?
Me too, and slots or not, they go in any old way.
I ignored the way it faced and tried to match the slots. The wires came out at the bottom (unlike the video). Adjusted the height and the lights seem to have a reasonable coverage, so I will leave it like that. Nice and white and very bright.
There should be a screwdriver that comes with the LED’s to help you adjust the bulb
Hi Lisa, I was wondering if you were able to resolve the issue?
Yeah, same exact problem (with the H11's), and no screwdriver came to adjust it (in either set). It looks like I will have to remove the o-ring as well, to even get to the only screw I can partially see. Installation videos aren't so much for the obvious stuff (wow, you reconnect the wiring!), but for the little unexpected issues such as this.
Just an update. The screw under the o-ring didn't help with adjustment at all. The bulbs are still oriented at about 11 and 5 (pass) and 1 and 7 (driver), so at least they look symmetrical, and they actually are still a decent improvement over stock.
i bought a combo set of H11/9005 sealight bulbs for my 2018 f-150 XLT and after opening the package there was no gloves inside very disappointed. From all other video i have seen the gloves came with them inside. SO WHAT HAPPEN????😠😠😠
9005 are they on inside or outside
9005 is a high beam bulb.. inside.
Hey, I wonder if I can use these in my headlight instead of my drl?
My wrx has the high beams facing 12 and 6 position
same here. did you ever figure this problem out?
I bought the high beam low beam set but the kit doesn't say which is the high and which is low, the bulbs look identical, called the support number and all i got some message in Chinese, if I had known this was a Chinese brand i never would have bought them, very frustrating!!! Should have been straight forward!!!
I'm installing them on my truck right now
The connectors for my high and low beams are different
The low beams have pins that are closer together
Unplug, and plug in, doesn't get any easier than that. Just installed a set on my 04' Highlander, maybe took 5 min.
Can we use 9005 in low beam?
No ,H11
9005s are usually high beams for most manufacturers.
Yes if they are 9006
So what’s the difference between h11 and the 9005?
one is low beam and one is high beam
When calling their customer "support" after finding it impossible to get the 9005's lined up at 9 and 3, the lay this on me: "Oh, in the 2021 Ram you need to have them aligned at 6 and 12." Nowhere on their website or in the installation instructions...in fact, the "Customer Support" section is "Coming soon..." - completely blank. Returning ASAP.
How come it says it fits 2015 chevy silverado and it doesn't fit them
I got em for a 2016 and they won’t fit either
How many lumens are those
Just installed. Easy and looks great
Does it fit a 99 f150!
My 13 year old son helped his dad install these light bulbs.
I wish I found it that easy!
Its easy as hell when theyre off the car, and theres no rust on the outer cover
Yeah my cover won't go back on (2011 Equinox.) Guess I'll keep trying
“anti clockwise” lol
My slit in my 4Runner is too big for them, awesome
I hate it when the slit is too big.
Looking for 9005 that can share DRL and high beam for Toyota Highlander 2016
Doesnt work in mine. The DLR are gone
how to fix the Flickering?
If it does that you can get a free replacement. Go to there website. I had the same problem before and went to their website and talked to come person who worked there. You just have to send a picture/video to show the problem then they'll send you a new one with no cost nor shipping cost. They work amazing btw, love them
I beg to differ! They only suggest I go out and buy a Canbus to fix the flickering, no offer to fix, replacement, no offer to send Canbus they know works. It’s a known issue with cars that have the Driving Lights on the same power as the High-beam.
@@motch6182 I got mine from Amazon and one of them was flickering. The seller replaced it for me, no questions asked.
These do not for a 2008 Honda Pilot. The connectors are way too small and the length of the fitting too tall. Just doesn’t fit at all.
those have DRL function?
Not that i know of
someone can tell me what it is different Between H10 and H11 please
It all depends on the manufacturer of your vehicle. But usually. H11s are low beams and h10s are high beams or fog/driving lights. Look up your vehicle's specs before buying. PS, if you have clearance issues, get their version 2 ones, where they made the back end more compact like the OEM counterparts to make it fit in those tight spaces
The bulbs lights won't stay I need buy a otter orange seal
??
These did not fit my 2007 Honda Pilot
DONT WORK ON A 2014 SIENNA AS ADVERTISED
Do it in a full vehicle
Now do it when the lens is in the car.
On my 2012 Nissan Sentra I can reach in from under the hood. It took me 10 mins to change and replace two bulbs
223 Verda Shore
Not for 5th gen 4runners.
What am I even looking at?
That was for a Kia soul
Let’s turn off the kid music and talk threw this haha
Caleigh Skyway
O'Conner Ports
603 Dan Camp
Botsford Trail
Morissette Light
Dessie Plain
Roel Run
Schulist Hill
Mekhi Vista
Madonna Trafficway
Reymundo Vista
Lincoln Ways
Haag Light
Dax Pines
Clement Trail
Kyla Ferry
Demarco Haven
Kuhic Cape
This video was NOT helpful at all. Probably because I have to go under the hood to do what ever it was you were attempting to show in the video. Thanks for nothing.
My stock halogen bulbs are 9005, and I have scoparc 9005s, but they don't lock in like my oem bulbs... They just spin freely with no 'locking' resistance. When comparing to my old bulbs, these leds have locking nubs/hills like a 'T', while my halogens have nubs like a 'Y' if that makes any sense. Any help?
Will these fit my Ford Explorer 2012 xlt?
They make more than one type of bulb. Just go to your local dealership or pull your bulbs out and read the number. If the numbers matches then yes.