Toyota just quoted me 40 something dollars to get my fog light replaced but that the bulb was only about $4 I decided to go ahead and watch your video and fix it myself thanks man
Keep in mind that this applies to the headlight assembly, not the actual light bulb. The light bulb is a 5 minute job and only requires removing the radiator cover. Ask me how I know.
Hi Thanks for sharing Wanted to know if you had problems with the audio system My radio is not working properly Keeps switching from FM to SAT by itself Wanted to know if you experienced same problem Thanks
By removing the fog lights are so very easy. But to locate the wiring connection of the fog lights you didn’t mention. Because my car is Toyota Camry and all wires are ready but no switches for fog lights
after i install HID kit i know notice occasionally when i start my car all the lights everything turn off , car doesnt even start "cnt even lock the car" have to wait 3-5min for the lights n notice the clock has been reset,n the lift front light turn on by it self even when the car is lock, now there no light coming from the left side :( what u think is the problem sir :(
I hit a deer and my front bumper cracked and the whole fog light assembly went flying. I got a new cover to pop into the hole of the new bumper I bought, and a new fog light, but I can't seem to find the plastic part that helps keep the fog light in place. It won't be in there very well if it's held in by a single screw and nothing secondary to secure it in place. What is that piece called? It didn't seem to be in the Camry parts diagrams I looked at. Thanks!
I noticed that when you are trying to work on the fog lights, you also had the screws on the bottom removed (probably because you were removing the whole front bumper cover). is this necessary or could i just leave those screws in?
You are right, I had them removed because I was removing the bumper. You should be able to leave most of them in. The one that is closest to the wheel well liner may need to be removed to create more room.
I bought a new 2014.5 Camry LE a couple of months ago, and was interested in switching out my headlight assemblies for the "SE" version. Do you know whether they are interchangeable? I would think they are, but thought it worth to ask.
![[ไฮไลต์] ฟุตบอลชาย ญี่ปุ่น vs ปารากวัย รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/X_BeGaAv1oM/mqdefault.jpg)
Toyota just quoted me 40 something dollars to get my fog light replaced but that the bulb was only about $4 I decided to go ahead and watch your video and fix it myself thanks man
Keep in mind that this applies to the headlight assembly, not the actual light bulb. The light bulb is a 5 minute job and only requires removing the radiator cover.
Ask me how I know.
mainesail 😂😂😂😂😂😂😂😂 thank you !
Thank you!! I was planning to remove my headlight!!
Cool vid bro, very helpful, Thank you.
Need a video on the driver fender removal 2013 Camry
Awesome video thanks
awesome, thanks!
Hi
Thanks for sharing
Wanted to know if you had problems with the audio system
My radio is not working properly
Keeps switching from FM to SAT by itself
Wanted to know if you experienced same problem
Thanks
sweet! thanks
By removing the fog lights are so very easy.
But to locate the wiring connection of the fog lights you didn’t mention.
Because my car is Toyota Camry and all wires are ready but no switches for fog lights
after i install HID kit i know notice occasionally when i start my car all the lights everything turn off , car doesnt even start "cnt even lock the car" have to wait 3-5min for the lights n notice the clock has been reset,n the lift front light turn on by it self even when the car is lock, now there no light coming from the left side :( what u think is the problem sir :(
Hi. I have 2014 camry HID headlights and the connector (socket) for the headlight won't come out. Is there a way to tackle this?
do u sell the tan ceramic light bulb holder seperately? And what is the part number?
I hit a deer and my front bumper cracked and the whole fog light assembly went flying. I got a new cover to pop into the hole of the new bumper I bought, and a new fog light, but I can't seem to find the plastic part that helps keep the fog light in place. It won't be in there very well if it's held in by a single screw and nothing secondary to secure it in place. What is that piece called? It didn't seem to be in the Camry parts diagrams I looked at. Thanks!
Hi, is that easy to replace headlight glass? I don't want to replace the whole headlight. Thanks
@happywrenching I will need to replace both headlights, do I have to turn the bulbs clockwise on both, driver and passenger?
I want a site to buy Camry 2014 spare parts...?
I noticed that when you are trying to work on the fog lights, you also had the screws on the bottom removed (probably because you were removing the whole front bumper cover). is this necessary or could i just leave those screws in?
You are right, I had them removed because I was removing the bumper. You should be able to leave most of them in. The one that is closest to the wheel well liner may need to be removed to create more room.
OK how do I takeoff the bumper? Is it clips? Can I just use a flat head?
I bought a new 2014.5 Camry LE a couple of months ago, and was interested in switching out my headlight assemblies for the "SE" version. Do you know whether they are interchangeable? I would think they are, but thought it worth to ask.
Not sure about that - I think they will fit but the wiring may be different. You might get a better answer on the Toyota forums.
Thanks for letting me know! :)
Is the black plastic support rail that holds the bumper close to the fender easy to remove?
jboy579 I believe it's just the two screws that hold it in place.
Can you install hid bulbs into the stock fog lights or does it need modification?
They should have made it easier..no way one should have to remove bumper cover to change headlight. Very poor design by Toyota