Step-by-Step Guide: Connecting a Force Feedback Steering Wheel to Your PC
ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2024
- Step-by-Step Guide: Connecting a Force Feedback Steering Wheel to Your PC
LIKE & SUBSCRIBE GUYS!
Software Link - drive.google.com/file/d/1Db0k...
👉*How to make a Force FeedBack Steering Wheel with Arduino* - • How to make a Force Fe...
👉 PART 3 : Fix all issues in the RFR wheel configuration - • Fixed and clarified al...
👉 How to play GTA 5 on this wheel with FFB - • How to use Arduino DIY...
👉 How to play Forza Horizon 5 on this wheel - • How to Setup Arduino W...
👉 DIY Sim Racing Dash Display - • DIY DIGITAL DASH DISPL...
Times :
intro (0:00)
Arduino IDE Installing (0:10)
Uploading Arduino Driver (0:36)
Installing Wheelconfig (1:40)
Setup Wheelconfig (1:54)
Explaining Wheelconfig options (2:54)
Force feedback direction fix (3:34)
Explaining Wheelconfig options (4:12)
WheelCheck Test (5:14)
Pedal calibration (6:07)
After calibration wheel error fix (9:07)
Ready to play (9:29)
After you can play (9:40)
End (10:06)
My PC
🖥 cpu - i7 11700 (16M Cache, up to 4.90 GHz)
💥 Gpu - ASUS Striks GTX 1060 6G OC
💥 cooler - NZXT X53
💥 MBorad - ASUS Tuf H570Casing - XPG Mid Tower case
💥 Keyboard - ASUS K1
💥 Mouse - ASUS M3
💥 PSU - ASUS Tuf 750W
💥 Cooler - NZXT X53
💥 Ram - Corsair 8GB x2 (3466MHz)
💥 Storage - Lexar NM620 256GB+512GB SSD/ 128Gb SSD
💥 - 2TB Hard
💥 Screen - 1050p 75Hz / 720p 60Hz
💥 Headset - HG11
💥 Mic - BM800
💥 Casing - XPG Mid Tuwer case
_______________________________________________________________________________________________________________________________________________
© I do not own all the material I'm posting on my channel. If you are a copyright owner and want your work to be removed PLEASE CONTACT US FIRST through (email- tashmikanimesh7@gmail.com) I'll delete this upload immediately.
________________________________________________________________________________________________________________________________________________
#Arduino #howtomake #DIY #dirtrally #gamingsteeringwheel #gaming #forzahorizon5 #gaming #forcefeedback #simracing - เกม
![DIY Force Feedback Steering wheel | Circuit and Software Setup [in ENGLISH] , DIY Sim Racing Wheel](http://i.ytimg.com/vi/crdDhvhBG0M/mqdefault.jpg)
![DIY Force Feedback Steering wheel | Circuit and Software Setup [in ENGLISH] , DIY Sim Racing Wheel](/img/tr.png)
![[CENTRALIZED MULTIPLE SUBVENDO] JUANFI PISOWIFI WIRELESS BASED TUTORIAL, MORE EARNS MONEY](http://i.ytimg.com/vi/x2QpTj5K1Eg/mqdefault.jpg)
*Fixed all issues in wheel configuration* - th-cam.com/video/U0nuY5OHgUA/w-d-xo.htmlsi=NAqeNzsIOhJLtEcB
Nice bro ❤
Thanks 🔥
❤️😍🔥
❤
hi man, when will the pedal shifter and f1 wheel video release? please tell me the date because I am making it for a competition 😄
The paddle shifters are still not finished. Some parts have not been found yet.😐
❤❤❤❤
bro help me i have problem that the arduino get recognixed and it works afterfew minutes the rx and tx just : rx: blinks nad after tx blinks and one minutes later same its boot cycyling? sorry for my bad english
Can you send a video of what happened? To my facebook page
bro, I made it using the Canon IP2770 encoder and and it can be used, but after I remove it and put it back on, why doesn't it work? even though all the connections are correct, they are still unreadable. Is the ppr wrong? or another possibility?
check your z toogle switch is on position.
and reset the wheel config settings and see its work.
And if there is a problem with the wheel, the Device status doesn't show ''ready'' (in wheel config)
If you making this, here are some tips you should know. Be sure to watch. th-cam.com/video/7EY1GpAGPck/w-d-xo.htmlsi=PEOsDiciiBHmt72X
Nice bro. Did you find a solution to the DC motor overheating?
Now there is no overheating. I think it's a problem with my previous motor.
Hi 😊😊 I setting all succesfully. But steer wheel not rotate.
Did you install the two resistors related to the encoder?
Bro I only want to use the software for pedals and H shifter, can this software be used? I will be using Leonardo only for this. No steering wheel
yes you can
@@zudumalli I got my leonardo, when I press Reset button, it shows as arduino uno bootloader for a second then it just reverts back to Arduino leonardo. If i try uploading firmware using Xloader, it shows upload failed
GIMX Adapter for your ffb wheel
Why didn't you use the EMC Utility Software?
What is the difference between EMC Utility and RFR Wheel Config?
Yes I Wonder too but i think emc lite is just too Limited and Efe Wheel is free with Desktop Effects ffb Setting etc. Although i dont think there is a huge difference between the Desktop effects but its clear that emc pro is better than Efe it dosent give any errors but it costs 10$ and on the lite Version the degree is only Limited to 900 degrees so of you want good experience better go with emc pro
And also arduino isnt Supporten anymore since 2019 for emc pro so your forced to buy a stm32 for the new updates
Balan hitiye.bro .thanks ❤️
😊
mine after uploading the frimware it rotate and never stop
make sure the wheel config command mode is ( PWM +/- ) or reset all settings to default
bro can u put a 5 minutes gameplay video on this setup❤❤ 🔥🔥
I will soon
ok bro thx😍😍@@zudumalli 🔥🔥❤❤
waiting❤❤🤘🤘@@zudumalli
Bro can i use motor encorder instead of this encorder you used??
Yes, watch my last video I explained this
@@zudumalli Thank you bro for that amazing video❤️
Steering wheel ekt 5A power supply ekk use krt awlk nadda
Motor eka mokakda
bro when you will upload next video
In two or three days. If you have any problem send me a message on my Facebook page
Bro can we use Logitech
shifter and this steering wheel together
yes
Bro can you make one for me
Bro can i edit the hex file?
i think no
hello bro
can you make a tutorial for Inverted pedals like in the video
Yes, soon
BRO CAN WE PLAY NFS GAMES
I haven't try