DIY Gaming Steering Wheel | Must-Know Tips for Making a Steering Wheel | Explained
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2024
- Title: DIY Gaming Steering Wheel | Must-Know Tips for Making a Steering Wheel
Welcome to our DIY gaming steering wheel adventure! if you are making a DIY gaming steering wheel, You should know these important points.
So far, two steeringwheels have been created on my channel. One is made with a game controller and the other with an Arduino.
🎮 In this video, I'll explore
Intro (0:00)
Game Controller issue (0:20)
what is dead-zone (0:25)
what does FFB mean (1:04)
what is better for the steering wheel (1:44)
how to make less money (1:54)
first method (potentiometer) (2:02)
second method ( Encoder KY-040 ) (3:30)
What is the mean PPR value (4:15)
Third method ( Printer encoder ) (6:23)
What is Torque (6:57)
why Torque is important for the wheel? (8:08)
How to Choose a Motor. (8:19)
How to increase torque. (8:31)
How to choose Power supply. (9:02)
about Wheelconfig software (9:37)
end (10:05)
👍 If you found this video helpful, don't forget to give it a thumbs up, subscribe for more DIY sim racing content, and hit the notification bell to stay updated on our latest projects. Comment below what you think about this video.
Get ready to revolutionize your sim racing setup with this DIY Force Feedback Gaming Steering Wheel project! 🏁🕹️
Thanks for watching
Join this channel to get access to perks:
/ @zudumalli
contact me (Email- tashmikanimesh7@gmail.com)
________________________________________________________________________________________________________________________________________________
#DIYSteeringWheel #ForceFeedbackWheel #GamingSetup#RacingWheelDIY #DIYProjects #GamingEnthusiast #RacingSimulation - เกม
the information are really helpful, thank you
You are welcome!
thank you brother.
You're welcome.
What other motor controller could I use? I don't have the bts7960. Is there one for a 5v motor? And how would I connect it in that case?
No, only bts7960 can be used for this.
Have you considered magnetic encoders as a cheaper option ?
Resolution is very high but I'm not sure if output signal is compatible with software......
Yes I am also not sure if it works with arduino
Bro can I use another thing in place of micro switch in H shifter from gamepad
Yes you can i use my mechanical switches from my keyboard
Which thing I have to use in the place of micro switch in H shifter made from gamepad
Because my budget is very tight
Bro its so cheap also its micro limit switch
The micro switch is the cheapest method
Can I use Ffb on gaming controller to arduino gaming wheel without using any motors
The game controller only provides vibration feedback.
Can i use another in the place of fan gear box in builting steering wheel from gamepad
Can u consider me other things gear box
yes
IF YOU PLAY CARX DON'T USE ASSISTS
did you mean ffb?
@@brownie2875 no
Bro ,for me with the 775 motor, when I turn the wheel, there is a screeching sound and the torque is very low, and the bts7960 driver gets very hot. I added another motor and tested it with 12V 10A and 20A, but there was no difference, what is the reason?
First, test the motor from direct 12v to make sure it works fine. then check the wiring of the BTS driver. maybe problem with your BTS driver.
Bro can i use the rpm euro games controller which is under 700 rs in India in builting of steering wheel with gamepad
yhh it's okay
My friend saw another video on TH-cam and it showed the rotary encoder getting stuck while spinning. Is there a solution to this?
That happens rarely. If there is no solution, it will be fixed after resetting the settings
Bro can I use rc motor gear box in building steering wheel from gamepad
yes its okay
Can i use a wall Adapter 12v 3.3 A for the power supply?
yes
I have a problem that I can't solve I hope you can help me, I'm using a 600ppr encoder but I can't make it work on pins 0 and 1, I tried on other pins with some code I wrote and it works perfectly, but since I try to put it on pin 0 is 1 it doesn't go, regardless if I use my code, etc utility lite or wheel config. Please help me
When connecting to pins 0 and 1, you have to connect through two resistors. It is shown in my (DIY spinning wheel) video.
Can i use the encoder module for arduino steering wheel
Yes use ckl and dt pins to rx and tx
Hey, it always throw an error when uoloading the hex code to the Leonardo boarx 😢. Whys that?
The hex file should be uploaded after pressing the reset button on the arduino board. This should upload within a few seconds.
Sir can i use encoder on joystick like potential meter
Please give me answers
No you cannot
Thanks
Thankzz for hearing my comment ❤❤❤❤❤❤❤
Hi i want to make a steering wheel without ffb should i use a potential meter or a encoder?
use a encoder.
can you explain the printer encoder pinout diagram
Search on Google
Bro if there any way to remove the dead zone in 🎮 controler , can you make an another video that explains the diy steering wheel using controler and I have a doubt about using a rotary encoder module instead of potentiometer, plz comment your thoughts ❤
Probably not, the PCB in these controllers are cheaply made and I think the simply processor/IC can’t keep up with such precise inputs.
Idk what doubts your having, but if it had to do with the software, anything is possible, my knockoff CH340 Arduino Uno R3 works by using vJoySerialFeeder, the CH340 cannot be used as an HID inputs through UnoJoy. If it’s about pricing, the Uno R3 CH340 only costs $3 minimum and the rotary encoder only around $1
Isn't there a way to connect the encoder and 4 potentiometers? To be able to use the handbrake without the need for the joystick
No, Wheel config software only supports 3 analog axes.
Ooh then there is no choice but to set the handbrake with a button, Thanks for the information Bro
@@zudumalli
I just cannot figure out how to make a non forcefeedback steering wheel self centering (especially using a rubber band), that’s only my problem lmao
I have tried with rubber bands but after a while everything breaks
@@zudumalli I just figured it out using elastic bands (not rubber bands), simply wrap it like a knot around the steering axle and hot glue it for extra protection for the center point. The elastic band I used is quite thick and provides decent tension/torque, and I’d doubt it’ll break anytime soon even after intense usage. The small issue is the frame, I used a cardboard frame which also where I wrapped the elastic band, the cardboard structure is bending when I wrapped around the cardboard, but thankfully I fixed this issue again by putting some sort of “roll-cage” to strengthen the structure by hot gluing a metal wire on it (in this case it is better to use something like a wooden tube, any some sort of metal stick, or PVC pipes since I don’t have it even something similar to that, atleast that it would fit without cutting it).
You can try emc lite
❤️🔥
can you make a tutorial on the ky 040 encoder
please!! or just get me a link
love from india
just search it in youtube. thank you!
Bro can I use 360 ppr instead of 600 ppr cause it cost less than 600 ppr pls reply
Yes you can
Can we use ffb using Encoder KY- 040
Not sure as ffb didn't work for me
Can you try EMC utility pro ❤
will try bro
how to do the paddle shifters??????
@ZUDU MaLLi
In the next video
This software support to the arduino uno board
no, Leanardo only
Bro which gamepad you use in the steering wheel made from gamepad
Bro plz tell me name
And also give the online link of gamepad you use in the steering wheel
ucom joystick. I bought from the local market
Can we use STM32?
Yes
Can i connect KY-040 to gamepad controller?
no gamepad doesn't support an encoder
@@zudumalli I have another question. Can i use something other than the gearbox because i don't have that. Thankyou!
Wiper motor ekata amphere kiyak oned
2.5A wage.
@@zudumalli amphere gana wadi unoth motor eka pichenwd
I fuck€d up my Thrustmaster TMX wheel, I did the roll barrels mod changing the “crunchy” steering for something more smooth, but on my ignorance I forgot to put some grass to lubricate it, and also the tension was much, so playing one day. The force feedback broke up. Also, on my desesperate and again, ignorance, I thought it would be easier to open it and fixed it, I touch mother board, and having a very nice non-skills on handleling electrónic components, I put much force trying to stick out some cable with de screw driver and I “stab” something on mother board who actually sparked jajajajaa. You can imagine I ensambles it and now don’t even turned on. I thought was something wrong on power supply, so I took it off (after 1-2 months of learning and counsoulting videos) n changed it to a laptop power supply. And guess what? Didn’t turned on JAJAJA. I want my wheeel back, I’m a younger studyhungry boy, no money to another “expensive “ wheel
You can use parts of your wheel and rebuild it. It's a bit difficult but try.
@@zudumalli Can u give me a consult or tutoring through some Social Media? If I may, Im agree to even pay for your time as a consultor
I brought a controller thats pissing me off, I couldn't figure out why Forza Horizon 5 doesn't read the input of the joystick, I wasted a lot of time working on it and no result, plz help if anyone knows
First Install the drivers for the controller. Then go to ''set up USB game contriollers'' in windows and check if it works.
@@zudumalli I actually tried playing rocket league with it and its working just fine, also checked it in the windows usb controller set up, its working, but forza horizon 5 ain't reading input from the controller, btw I playing it on xbox game pass
how to fix this problem
what problem?
@@zudumalli all problems that you speak about gamepad
Pin