Refreshing an 80s VOLKSWAGEN engine | Volkswagen Golf Mk1 Engine swap
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2019
- In part 2 of the Golf Mk1 engine swap series the 'new' engine was presented. In this video you can see the entire process of what the 1.8L has gone through from when i got it to where i showed it to you guys in episode 2.
Disclaimer: This was the first time I did a project like this so be gentle in the comments :)
ENGINE REVEAL | Volkswagen Golf Mk1 Engine Swap Part 2
• ENGINE REVEAL | Volksw...
Subscribe:
/ @memphis5220
You can follow me on:
Instagram
memphis_you...
Twitter
/ memphis85158256
Contact me:
memphis.channel.yt@gmail.com - ยานยนต์และพาหนะ
![ตรงที่เดิม - ฝน พรสุดา [ต้นฉบับ :เบส ขวางหวัน]](http://i.ytimg.com/vi/c5YnbGEztI8/mqdefault.jpg)
I remember these SOHC 8V engines. I built a couple of these. The German spec 9A ( here in the States ) was the engine to have if you wanted a good build. It came with the 10.1:1 CR pistons. Stout little engines but they do better as turbocharged units. Nowadays if I were to build one I would skip these and go for the 1.8T...same engine just with 5 valve head. The make nice projects!! Would make an MK1 go like the wind!! Glad to see someone is still into these older cars. They have so much more character than the new Volkswagens.
Here in Brazil this engine is legendary, it's called A.P. (Alta Performance (High Performance)), i have one in my VW Passat 1.8 1986 and works pretty well. Sorry if I wrote something wrong, i'm drunk as fuck right now. PASSAT TURBÃO 3KILIMEI .
Here in Brazil, this engine is know as AP and it was used by VW until 2005 if I'm not mistaken. Very reliable engine.
Eu acho que os ap só foram feitos no Brasil, na Europa é outra referência
@@eoquimporta1430 É a sigla EA, se não me engano é EA837 e EA827 nesses carros
Tem gente que chama os MI de AP tbm, esse aí é APzao tbm igual do meu Seat 97
@@GuilhermeMetz
O Motor AP de primeira geração era chamado EA827, já o de segunda geração era o famoso EA113
Motor AP foi fabricado em sua segunda geração (EA113) até 2016, a primeira geração (EA827) foi produzida até 2009
Since you went so far as removing the valve cover and changing the belt pulley, you could also replace the belt and remove the cylinder head to check the valves and cylinder walls. You could have removed the oil sump and checked the oil pump. All in all a great job done with all the tin parts.
i igree!
and water pump change...
The cylinder head bolts of this engine deform when being tightened. So you would have to buy new ones if you want to remove the head.
@@joshuatassone8764 that's weird are they meant to?
@@ricky107_ Based on my knowledge, yes.
Nice work. For a complete work, you can clean the pistons, replace the head gasket and bearings. A lot of cars used this engine here in Brasil, in 90's was common a 1.8s ethanol version, with 12.3:1 of compression and Pierburg 2E, they came with 106cv from factory.
Thank you for sharing your wonderful videos I am from South Africa
Now it is nice and clean for a mechanic to work with.
That model of engine was the heart of almost all VW models here in Brazil from the 70's until 2010's and many people associate the decay of VW here because they don't use it anymore. If you search for "AP Engine" or "AP Engine Turbo" here on youtube you're going to get tons of brazilian videos about that engine.
A P E Z I N H O
These are good strong reliable engines, had one in my jetta mk2 in South Africa. Done a mp9 fuel injection on it after a while and ran strong as hell!
24:28 that’s the best feeling when working with old cars and sheared bolts. Couldn’t have put it better “Nice”.
Your channel is awesome!! Great editing and I love your accents!! Keep the videos coming. I am working on a 1980 mk1 Convertible myself on my channel.
Had this engine in my MK2 Golf GL. Went really well. Only problem I had was having to replace the plastic carb manifold mounting several times as they like to split. 90hp and decent torque.
How can you not like a clean engine? A clean engine runs cooler and therefore longer. Thumbs Up. I think I would have changed the timing belt as well, myself. A ton easier then when it is installed...
Good job on the refresh. I would suggest wearing safety glasses when working with that drill brush, as those individual metal strands sometimes shoot out.
Amazing work
Great work. Congrads!
In Brazil this is the most prepared engine for high power. called "AP" alta potência and came out in several cars of own brand: gol mk1 mk2 mk3 mk4, Santana mk1 mk2, Passat b1, Apollo, polo classic, Jetta mk6, golf mk3 and mk4, Voyage mk1, Saveiro mk1 mk2 mk3 mk4, parati mk1 mk2 mk3 mk4, pointer, Logus, van And diesel version as in Kombi and Saveiro
Nice. But here's a tip: Before polishing anything, make sure it's cleaned first. The valve cover you should wire brushed first then polishing that way you would had the polished bright look that you were looking for! But keep doing what you're doing because we all start somewere!
Great job and skills!! Hope I can have this done on mine
I have to do this to my mk2 1.8..god work bro 👍.
This young lad did an awesome work, he is talented for his age, and all I read are silly comments below...Keep up the good work, great editing also.
I don't think I've seen a direct acting overhead cam IRL before. Nice!
stoped playing Heroes of Might and Magic 3 to watch this ..beautifull to watch...freakin cool
Nice job! the engine looks much better👍
You’ve done great job. In future show us more of what you did on the inside of the engine.
Very nice work!
This is the most bulletproof VW 4 banger known to mankind!!!! IMO
Correct.
dont forget the 1.9 TDI
@@Pain5k in terms of reliability older engines are better even though they might be more pollutant and lacking technology, my grandpa had a 1.6 diesel passat b2 that engine was a tank, car got scrapped unfortunately
Yea, and that's not saying much either.
@@Pain5k and 1.6 8V, 1.8T, 1.6D, 1.9D, 2.4D, R5 2.5Tdi...
Outstanding.
Nice work! Just discovered your channel. Look forward to more!
Great job, it will be great if the garden is protected too from oils and cleaning products not only the engine ;)
Alleen de thumbnail is al een duimpje waard, goed bezig kerel!
Hello and thank you for the video, where did you find the screw that tightens the belt cover? Mine is damaged. Thanks Memphis (at 28 min 28 sec) 😁
I'm most concerned with the spark plug threads for cyl. #2. Were they galled up, or was that just the plug?
12:00 wear a mask! Don't breath in this aluminum dust!
Nice Work!!!
Nice project.
you forgat something.... vavle cover and replace head gasket..... so much work without the most important one....
Помыл движок и всё, теперь потащит как новый!!! А вы что незнали ?, вот вам наглядный ролик😀😀😀😀😀😀😀😀
@dima kosmonavt этот двигатель не убидь ничем. Он всегда хорошо тянет, ну на сколько 90лс могут.
Хотя если дать его рукажопам, то они и его угробят.
Hey, just wanted to ask, do these also come in golf mk2? and if they do, they fit well etc. right?
I know this was a while ago but how long did it take to do? I’ve got same engine in a VW Scirocco Mk2 and it’s my daily ride. Could this be done in a weekend do you think? Thanks 🙏
Satisfying to watch
you might be the right person to ask. i'm looking to convert a manual mk1 engine to automatic. besides the gear box what else do i need ? thanks
You are good Mechanic
Bravo ricorda che gli grandi della historia se la hanno fatto del passione e ingenio. .complimenti ragazzo..
Nice job! 👌👌👌
that engine is called AP, there is 1.6, 1.8, 1.9 and 2.0 versions. it's the most popular engine here in Brazil, cuz it can hold high presures of turbo, it's really cheap and u can find it anywhere. we have cars with almost 2000 HP using this engine.
i really would LOVE to know how your getting 2000hp out of a 8v 1.6 🤦🏻♂️
@@vdubskiee5356 well then search for the AP engine and enjoy :)
i had that engine too but in my mk3 golf gl from the 99
Nice job boss
Hey, welk spul gebruik je in spuitbus om mee te ontvetten? remmenreiniger?
Bro! So dope
Famoso motor ap aqui no Brasil muito bom esse motor é usado pricipalmente em provas de arrancada por aguentar muito as pressão dos turbos
excellent skill very good video 👍🏻
Good job
Agree, the Sparkplug threads are definitely unhappy and sad :(. A lot of work involved and think some people do not realise just hard it is doing this kind of project. And of course, we always need the ubiquitous can(s) of WD40 or Equivalent, I know I have used up many a can in my time doing projects like this. Usually helping my mates.
The bracket that you removed around 9:33, does anyone know what it is for? I've worked on this motor myself and never seen it before.
Kiedyś miałem VW GOLF 3 z silnikiem 1.8 GT 90KM ABT, teraz mam AUDI 80 B4 2.0 90KM ABT. W Audi zrobiłem remont silnika. Pracuję w autoszlifie.
I used to have a VW GOLF 3 with a 1.8 GT 90KM ABT engine, now I have an AUDI 80 B4 2.0 90KM ABT. I overhauled the engine at Audi. I work in a car repair shop.
engine AP 1.6, 1.8 and 2.0. His in Brazil the engine is very good. "AP" Alta Performance.
Apzero kkkkkk
No Brasil e em todo o lado 😅😂🇵🇹🇵🇹 tamos juntos
En Argentina *AP o Audi*
@@thenewells6411 hice un swap de un motor ap 2.0 muy buenos resultados, repuestos un poco caros pero hay de todo
Hi I just in middle on this project and I not find mount Engine and gear box you know wher I can buy mount
24:29 *N O I C E*
great video.
be sure to wear PPE when dealing with oil or fuel.
This engine is very popular in Brasil, we call this motor A.P.
Why A.P
@@sunnydoes7200 A.P means ("alta performance" translated to English is "High performance".
Is it missing a camshaft journal cap between cylinder 3 and 4?
Oh man! I had a Golf Mk2 with an 1,6 75 HP engine, which is basically the same as this one (except for some internal things).
I don't suppose you have a list of all the cleaning stuff you used? I saw a lot of WD40 but wondered if you used other stuff also? Cheers. Great video btw.
Hi man nice work
what is that spray, he is using for opening the bolts?
hI guys wonder if you can help, I have Fiat Uno 1100 1999 model.close on 275000 km on the clock. runs like a dream. on the freeway. BUT idles far too high when at stop street or stuck in traffic. was serviced recently and I thought it was the choke that was stuck. Had carb serviced a few months back. guy did a great job. starts easy , dont even need the choke anymore to start it . But none of the mechanics can get the idle down to normal. the last garage said that the carb is " over fuelling ".. or something like that. all I know is its just costing me plenty but Id like to keep the car as a great little " run around ". what does it sound like to you ?
Would love to do something like this
So did you take the engine apart and rebuild it or just clean the outside?.....
toch een mooi resultaat
Ja hè, maar ik zou toch de distributieriem vervangen hebben
I found a total gem of a engine!
A 1600 engine for sale for only 250 euro’s! Sadly it does not come with a transmission. I have a build project coming up in 2 years time which is perfect with engine like this, but should I go for it? I am mostly just afraid to miss out on a engine like this.
good job thanks
Looks nice )
How is possible to put distributor in position I have remove wrong way Audi 80 1.8s
Nice outside restauration but what happened inside of the engine ?
The most famous engine in Brazil, AP 1.8.
Eres 1.5 o 1.6
u did great
refreshing...does that mean cleaning and painting? I was hoping for more of a mechanical rebuild.
@Jeroen it dosent matter how clean it looks , i mean with REFRESH i thought they will open the whole Motor and clean it inside.
Even Worst that he doesn't care about the inviromantal impact of disposing that cleaningspray outside on the lawn.
Thank God this comment is high up, was hoping for a mechanical rebuild as well and this just saved me a few minutes that would have gone wasted
That would be a rebuilding...
Hello please may I have the list of chemical and tools used to clean it to look like this
this job added 50 hp to the engine
This engine barely had over 50 how from the factory
He didn't add squat, except make the engine look cleaner...not a single performance enhancing job was done to it, and by reusing the old timing belt after slopping chemicals all over it he may well have shortened the life of the engine.
Some of us are broke but still wanna have nice things
@@user-dn6qy1ou1f It had 90hp from factory you dummy
@@warika1208 the original comment flew right over your head.
13:06 just disassemble all and sandblast!
Found your videos yesterday, they’re great! Looking at mk1s now, my final goal is a 2.0 with a 1.8 head in a cabrio or 4 door golf
mk4boi I have a 86 2 door
I cant feel how much force your putting on that ratchet, but by the looks of it; looks like alot. And I'm a amazed that little thing can handle it without busting the gears. Seems like a 1/4" ratchet?
you wouldn't happen to have a intake manifold for a carbureted 1.8cc?
15:32 a tip is to hammer on a 12 point socket and lose it with an impact machine.
been waiting till the end to see the pistons...
Someone else was waiting for the tear apart too?
15:37 reminds me of the ATS Cup alloys from the 90s!
I think they're widened G60 steelies.
nice work dUdE -_-
the best 4 cylinder engine ever made! 😍
😂😂😂😂😂😂
You should not be allowed internet access
Why didn’t you changed the runing parts?
How do you remove the hedhehog?
Why you not change crankshaft oil seal? Its leaking...
I still ride a 1400 version. 240 000km never opened. No oil usage. Recently did the clutch myself. If I were him with the engine out , I would have done the clutch, water pump and head gasket. But first compression test.
o famoso AP 1.8
Treskilimei
Ele colocou a mesma correia dentada?
Esse e 1.5 85cv ou 1.6 90cv a diferença dos nossos e a taxação lá eles já tinham 10:1 ou 12:1 já e o combustível de alta octanagem
@@thiagowarmling2827 eu n sei mas tudo dá a entender q sim
@@thiagowarmling2827 mesma correia dentada que se for a original tem apenas 197000 quilômetros rodados, ou pior, milhas kkk
22:19 hmm not bad, it is AWSOME!
No, it's stupid
The fly in the ointment for all of us amateur re-builder types is where does the gunk go when the pieces are power washed? More often than not it seems they just go into the yard. There should be a better way. Love to watch you having fun!
Great video mate but showing 197k would’ve done engine overall
Damn! All this work and didn't you change the head gasket???
i said the same thing lol 🤦🏻♂️
He can easily do it when it’s back in the car when or if it’s it’s gone tho
In Brazil we build this engine with 1000hp
That seems a bit excessive :D