puts race bushings on. "Something is vibrating"...I would recommend using new hardware on any bolt that requires the additional turns after torque. Those are stretch bolts.
I fitted an ALK to my toyota starlet. The name is a little confusing because they actually take some of the anti dive out. This gives your front tyres a little more bite when
Nice. Finally will install soon the cp3, 2200 bar sensor and a catch can on my cjaa. Would like to reach 240hp to the flywheel but idk if it will be possible with the Xman cr170. Still if the car have 200whp i will be happy. Have you taken into consideration the passat b6 aluminum arms and spindles?
@Vicktur Orteez well a good 225/45 on an 8 wide will do that for you, if you want meatier appearance then 235/45 or 245/40 also work well. So just keep in mind [tire grip rating > tire size] for something like this. Generally for a nice meaty fitment without sidewall spillage past the wheel, tire size would be [wheel width + 1"]
Hello the mechanic did not use the supplied moly grease and it is extremely noisy. Did you still get creaks immediately after installation or is it noise free as intended with the proper lubricant?
@@terryl9996I had my mechanic install these on both of my cars, never made a single noise and he never used grease. Must be something wrong with your car buddy LOL
puts race bushings on. "Something is vibrating"...I would recommend using new hardware on any bolt that requires the additional turns after torque. Those are stretch bolts.
Mazdaspeed3 owner here, looking into ALK. Thanks for sharing your driving impressions, very helpful.
Highly recommend doing the front subframe locking kit if you don't have it already! Makes a nice difference.
I fitted an ALK to my toyota starlet. The name is a little confusing because they actually take some of the anti dive out. This gives your front tyres a little more bite when
Nice. Finally will install soon the cp3, 2200 bar sensor and a catch can on my cjaa. Would like to reach 240hp to the flywheel but idk if it will be possible with the Xman cr170. Still if the car have 200whp i will be happy.
Have you taken into consideration the passat b6 aluminum arms and spindles?
For regular road use would you still recommend the red bushings?
Any thoughts about the pros & cons of fitting the red motorsports inserts? Cheers
What brakes are you running any mods
ECS 2 piece rotors with front caliper bracket relocate for the larger rotors!
4:00 alignment. shitty suspension geometry, you now have too much toe out on rear wheel
What's your tire size on the RPF1
He's previously said they're 17's so probably 245/40/17 cuz it's pretty meaty, another popular fitment is 235/45/17
@@joelgarza87 yeah I'm running 17s and want a good tire spec for daily driving that gives me good grip for backroads
@Vicktur Orteez well a good 225/45 on an 8 wide will do that for you, if you want meatier appearance then 235/45 or 245/40 also work well. So just keep in mind [tire grip rating > tire size] for something like this. Generally for a nice meaty fitment without sidewall spillage past the wheel, tire size would be [wheel width + 1"]
Joel is correct in size, 245/40/17! Thanks Joel
@@ThatGuyTyy pretty easy guess when I used to run the same fitment with hypergrams lol
Hello the mechanic did not use the supplied moly grease and it is extremely noisy. Did you still get creaks immediately after installation or is it noise free as intended with the proper lubricant?
Never made any squeaking after install, the grease is super important
@@ThatGuyTyy thank you for replying. Do you get creaks now or still no noises?
@terryl9996 still no noises!
I'm so sad@@ThatGuyTyy
@@terryl9996I had my mechanic install these on both of my cars, never made a single noise and he never used grease. Must be something wrong with your car buddy LOL