You are amazing 🙌🏽 I totally forgot about the fuse box under the dash And all I needed was a fuse that was blown for the brake light (tail lights were working fine it was just the brake light that wasn’t working) great video 👌🏽
Thanks for the video I’m trying to diagnose my cruise control not coming on on my 2011 corolla. Replaced the knob and wire inside steering wheel and I thought it was fixed because the cruise light starting coming on after a few minutes after plugging my battery back up.. but then in the morning Once I started the car it wouldn’t work any more. My next step is to look at the brake light switch but my brake lights work perfectly fine as far as I can tell so I’m in a loop lol I think maybe the ecu turned off cruise control because I have a worn out automatic transmission but I’m literally making that up. Your video definitely helped thank you.
How do you not have a million subscribes!??! You are mister fuse/electrical troubleshooter magician! Keep up the great work and I would add a key point to any Prius owners out there; at least on the 2004-2008 Gen 2 Priuses- if you can't start your Prius, the fault might be the brake light switch. To test, have someone look at the brake lights when you depress the pedal, they should go on regardless of engine status. If they don't go on, and you can't start the car (it'll seem like you're stuck in accessory mode), then your brake light switch is bad or out of position. This was a known issue on a bunch of Toyotas of this era. There was a TSB on it and I think maybe a recall. Anyway, relatively easy fix for a Prius that won't start.
it's a good video if the watcher already understands 'over limit' and what he is explaining. A regular guy unaware about electronics at all will be lost.
Before you do anything… Try this… My situation was my brake lights worked but I was having trouble getting the stick shift out of park. I sprayed some WD-40 on that button at the bottom of the switch and that was what the problem was! The damn thing was stuck… That’s all it needed. May not fix it for you but it sure did for me! Certainly worth trying before you do anything else… Now if your brake lights won’t shut off that is something else probably. But it was an instant fix.
Thank you for the great video! I am diagnosing an '06 that goes into a sort of 'limp mode' when the plunger on the brake light switch is depressed. Any ideas?
Brake pedal Supposed to be wiggled left and right ? Mine does wiggle so I m asking you . Yours does or not! May be mine is losing nut from left. Thank you in advanced
Hello sir this is an amazing video I’ve done everything you’ve said, but my car still does the same thing, it won’t go into gear and cruise control won’t work, I put a new switch in but it doesn’t seem to work, do you have any other idea of what could it be ?
07 Toyota Highlander the right turn lights flashing normal but when stepping on brake pedal the brake lights and the turn signal lights flash rapidly. Replaced turn signal switch and swapped sockets. Problem still exists.
Today the dash lights and tail lights went out, tail lights do come on when you apply The brake peddle but lights don't come on when You release the pedal.
Gday mate ,on me 2006 corolla i have 1 brake light working checked fuses all good and new bulbs , would a dodgy switch maybe make only 1 light come on maybe ? Cheers 4 putting up video
By luck you'll see this,🤞🏾 according to a commentor below you're good with electrical things so may I ask what could be the reason for my high mount break light on a 2009 Toyota Avalon only working intermittently in low heat to not at all when temps are extremely hot and always working perfectly fine in the winter. The lower two work without any problem, I have no issue with the break lights staying on. I replaced it with one from the junk yard with the same issue. Could it be a bad switch or wiring issue?
I am not getting power for my 2005 Corolla as I tested it with 15A fuse, coz I tested my switch & fuse with multimeter and I am getting continuity for both. Please advise how to fix power supply. Thanks.
If anyone can help me figure this out. So both my of taillights turn on but only one (drivers side light) turns on when I brake. Is it a fuse?? I’m a bit lost. I don’t think it’s my light switch right?
My shiftlock and my brake lights didn’t work the fuse underneath the dash under the steering wheel was my problem the fuse is blown this video help me find that I would’ve never known that was there thank you TH-cam video
So I check the fuse and it’s fine I don’t think it’s the switch either because when I did the fuse test the brake lights didn’t come on. What would be the next solution? Thank you in advance!
How the hell do you get to that fuse block so easily!? Man, I have to almost remove the seat first so I have enough room...lol I've vowed to curse the Toyota engineers who decided to put a fusebox in such a horrible location.
You are amazing 🙌🏽
I totally forgot about the fuse box under the dash
And all I needed was a fuse that was blown for the brake light
(tail lights were working fine it was just the brake light that wasn’t working)
great video 👌🏽
Thanks for the video I’m trying to diagnose my cruise control not coming on on my 2011 corolla. Replaced the knob and wire inside steering wheel and I thought it was fixed because the cruise light starting coming on after a few minutes after plugging my battery back up.. but then in the morning Once I started the car it wouldn’t work any more. My next step is to look at the brake light switch but my brake lights work perfectly fine as far as I can tell so I’m in a loop lol I think maybe the ecu turned off cruise control because I have a worn out automatic transmission but I’m literally making that up. Your video definitely helped thank you.
Excellent video, thank you for posting this!
How do you not have a million subscribes!??! You are mister fuse/electrical troubleshooter magician! Keep up the great work and I would add a key point to any Prius owners out there; at least on the 2004-2008 Gen 2 Priuses- if you can't start your Prius, the fault might be the brake light switch. To test, have someone look at the brake lights when you depress the pedal, they should go on regardless of engine status. If they don't go on, and you can't start the car (it'll seem like you're stuck in accessory mode), then your brake light switch is bad or out of position. This was a known issue on a bunch of Toyotas of this era. There was a TSB on it and I think maybe a recall. Anyway, relatively easy fix for a Prius that won't start.
Thanks for the info!
Very straightforward and helpful video.
Excellent video. Very informative. Thanks.
it's a good video if the watcher already understands 'over limit' and what he is explaining. A regular guy unaware about electronics at all will be lost.
Before you do anything… Try this… My situation was my brake lights worked but I was having trouble getting the stick shift out of park. I sprayed some WD-40 on that button at the bottom of the switch and that was what the problem was! The damn thing was stuck… That’s all it needed. May not fix it for you but it sure did for me! Certainly worth trying before you do anything else… Now if your brake lights won’t shut off that is something else probably. But it was an instant fix.
Thank you for the great video! I am diagnosing an '06 that goes into a sort of 'limp mode' when the plunger on the brake light switch is depressed. Any ideas?
Helped me turn off my break lights in my ol Rav4 96 when they were stuck on one night. Let's see if that saves my battery.
Brake pedal Supposed to be wiggled left and right ?
Mine does wiggle so I m asking you . Yours does or not! May be mine is losing nut from left. Thank you in advanced
Exelent video txs
on my 2009 Corolla I just bought, I noticed the brakes dont come on right away until I push the pedal down about a 1/4 inch or so
Hello sir this is an amazing video I’ve done everything you’ve said, but my car still does the same thing, it won’t go into gear and cruise control won’t work, I put a new switch in but it doesn’t seem to work, do you have any other idea of what could it be ?
07 Toyota Highlander the right turn lights flashing normal but when stepping on brake pedal the brake lights and the turn signal lights flash rapidly. Replaced turn signal switch and swapped sockets. Problem still exists.
Today the dash lights and tail lights went out, tail lights do come on when you apply
The brake peddle but lights don't come on when
You release the pedal.
Gday mate ,on me 2006 corolla i have 1 brake light working checked fuses all good and new bulbs , would a dodgy switch maybe make only 1 light come on maybe ? Cheers 4 putting up video
By luck you'll see this,🤞🏾 according to a commentor below you're good with electrical things so may I ask what could be the reason for my high mount break light on a 2009 Toyota Avalon only working intermittently in low heat to not at all when temps are extremely hot and always working perfectly fine in the winter. The lower two work without any problem, I have no issue with the break lights staying on. I replaced it with one from the junk yard with the same issue. Could it be a bad switch or wiring issue?
Hey, how to install sequential strip ( 7 wires) light on rear of 2001 Toyota Camry 😢
I am not getting power for my 2005 Corolla as I tested it with 15A fuse, coz I tested my switch & fuse with multimeter and I am getting continuity for both. Please advise how to fix power supply. Thanks.
Do you need to calibrate the switch?
If anyone can help me figure this out. So both my of taillights turn on but only one (drivers side light) turns on when I brake. Is it a fuse?? I’m a bit lost. I don’t think it’s my light switch right?
My shiftlock and my brake lights didn’t work the fuse underneath the dash under the steering wheel was my problem the fuse is blown this video help me find that I would’ve never known that was there thank you TH-cam video
How to change the bulb switch for a 2007 Toyota Corolla
Thank you
On my 2008 break lights don’t work. I know it’s not the bulb because bulbs never go out when both of them
So I check the fuse and it’s fine I don’t think it’s the switch either because when I did the fuse test the brake lights didn’t come on. What would be the next solution? Thank you in advance!
How did u fix it im having same issue?
Subbed
You don't have to have a stopper pad? Could I maybe tighten the switch and not worry about the pad?
Brake light stays on after pad broke btw
You need a stopper pad for sure
Sir I have same problem in clorrlla 2006
No plunger pad. I think my 1989 Toyota requires one.
Would this work also on a 2005??
Yes
How the hell do you get to that fuse block so easily!? Man, I have to almost remove the seat first so I have enough room...lol I've vowed to curse the Toyota engineers who decided to put a fusebox in such a horrible location.