Unfortunately, all Big Tex with mega Ramps drag. I have video of me getting stuck going up a hill into a gas station. The long the trailer, the worse the problem
@@lifeontheroad_ yeah last week i ripped the bottom bar open and tore my wires up, i'm thinking im going to take a few inches off and reroute the wires
www.amazon.com/Blazer-B165-Round-License-Utility/dp/B06WD6LDGL/ref=mp_s_a_1_18?crid=34XYOI0JN6GP2&dib=eyJ2IjoiMSJ9.XRgweiu635Hboj8JZnMOMWcKO3Ir2mRx3BVMa4ebrVv-O7pACiDToyfClI8MInfcVxpZiPXhYgL8MG3xXh5nC8Q5wK4ZPLnI-eY9rGtzB__WDQm5wmkMGdJAxJqHaWeiz56pMJyki4zz_aQxC_IFomddzDr6pV9TM6fboxZr9dFZZOIc9jFdtv4nNxCWZZ8s0frdjPhqyT4vVeDONlmz9g.b-XljEI3DCGT2mTmr7gy_2osSpjdYYUZ2lw_coGskhA&dib_tag=se&keywords=led+license+plate+light&qid=1712073576&sprefix=led+license+plate+light%2Caps%2C93&sr=8-18 I case you have not found a set.
@@lifeontheroad_ I have a 2023 big Tex 25gn and I noticed an issue with the front jacks. When I’m unhooking from my truck and I’m lowering the jacks, once the left jack touches the ground the right one is still about 3 inches off the ground. Not sure if it’s a big deal but shouldn’t they be touching the ground at the same time? I wonder if there is an adjustment. Even it’s it’s not a big deal it pisses me off since the trailer cost me so much money and it’s brand new. Any idea?
@@disarmyou84 Hmmm. This trailer does the same thing. However, I assumed it was uneven ground. But maybe the jacks are uneven. Quality Control has been lacking on all accounts. Make sure to check all electrical connects, especially heat shrink connectors at axles for brakes. More than likely brakes will need adjusted. I just had an owner-operate with the same trailer. The wiring harness was stuck between the decking broads.
When you open that ramp those arms are going to snap that
I'd like to cut off the bottom 3 inches of my big tex 22gn, it drags entirely too much
Unfortunately, all Big Tex with mega Ramps drag. I have video of me getting stuck going up a hill into a gas station. The long the trailer, the worse the problem
@@lifeontheroad_ yeah last week i ripped the bottom bar open and tore my wires up, i'm thinking im going to take a few inches off and reroute the wires
Link to the tag mount?
Can’t find link. However, it was an Amazon purchase. Search hinged mount license plate bracket.
Perfect. Thanks!
Can you share a link to where you bought those LED lights? Having trouble finding LEDs that are a direct swap for the ones Big Tex uses.
www.amazon.com/Blazer-B165-Round-License-Utility/dp/B06WD6LDGL/ref=mp_s_a_1_18?crid=34XYOI0JN6GP2&dib=eyJ2IjoiMSJ9.XRgweiu635Hboj8JZnMOMWcKO3Ir2mRx3BVMa4ebrVv-O7pACiDToyfClI8MInfcVxpZiPXhYgL8MG3xXh5nC8Q5wK4ZPLnI-eY9rGtzB__WDQm5wmkMGdJAxJqHaWeiz56pMJyki4zz_aQxC_IFomddzDr6pV9TM6fboxZr9dFZZOIc9jFdtv4nNxCWZZ8s0frdjPhqyT4vVeDONlmz9g.b-XljEI3DCGT2mTmr7gy_2osSpjdYYUZ2lw_coGskhA&dib_tag=se&keywords=led+license+plate+light&qid=1712073576&sprefix=led+license+plate+light%2Caps%2C93&sr=8-18
I case you have not found a set.
What is this hinge mount? Where to get etc?
More than likely from Amazon. It is designed to go front of a semi truck.
Hi, how is the license plate holding up ?
I let a driver use trailer. I am guessing that he backed into something because it is bent inwards.
What year is that trailer
2022
@@lifeontheroad_ I have a 2023 big Tex 25gn and I noticed an issue with the front jacks. When I’m unhooking from my truck and I’m lowering the jacks, once the left jack touches the ground the right one is still about 3 inches off the ground. Not sure if it’s a big deal but shouldn’t they be touching the ground at the same time? I wonder if there is an adjustment. Even it’s it’s not a big deal it pisses me off since the trailer cost me so much money and it’s brand new. Any idea?
@@disarmyou84
Hmmm. This trailer does the same thing. However, I assumed it was uneven ground. But maybe the jacks are uneven. Quality Control has been lacking on all accounts. Make sure to check all electrical connects, especially heat shrink connectors at axles for brakes. More than likely brakes will need adjusted. I just had an owner-operate with the same trailer. The wiring harness was stuck between the decking broads.
@@lifeontheroad_ yes the way they wire it it’s like they don’t know it can rub through on the contact points. It’s a shame since it cost so much.