EDGE CTS3 MONITOR UNBOXING AND REVIEW!!!
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- You asked for it so here it is! My video on the Edge CTS3 Monitor! Keep in mind these DO NOT come preloaded with tunes, there is just an option to use HP Tuners with the monitor, not 100% how it works, but its there. These work on a bunch of vehicles, not just diesels, so if you want one for your ram 1500 you're good to go!
Please Like and Subscribe!
Instagram @darkirondiesel
MY GEAR
GoPro: amzn.to/3mGCh7t
Tripod: amzn.to/3iPtcHk
Camera: amzn.to/3cf8lum
Mic: amzn.to/33PqcnQ
Drone: amzn.to/2ZWfj2v
Gimbal: amzn.to/3hP8Mg0
MY TOOLS
1/2" torque wrench: amzn.to/2FD3He4
3/8" torque wrench: amzn.to/2RNi3KY
1/2" impact: amzn.to/32OVUSQ
3/8" impact: amzn.to/32PrUqi
Drill and Driver: amzn.to/3kMgv0D
This is the most simple best video I’ve seen on this monitor
I had the first edge in my old 6.0 definitely want to get one for my lml, currently have the bullydog gt tuner/monitor
Does this gauge tell when the truck DPF is in regen?
Also, will this show EGT on newer trucks or do new trucks still not have an EGT probe?
Can I hook this up to an efilive auto cal or ezlynk auto agent?
I Want one! and I don't even own a vehicle.
How much?
The loading screens still seem really long for something that’s “updated”
Did you buy the monitor or the monitor and tuner?
I’d totally buy one of those bud!
Back up camera
How come you can't check your injecter balance on a Cummins or Power Stroke that sucks I ordered CTS3 for my 05 Cummins 5.9l can't wait to see it installed in my truck
I don’t actually know the answer to that question, but it would sure be helpful if we could. It’s the easiest way to check how well your injectors are performing
Thanks for the video. Would you happen to know if this Gauge will display the Fuel level on a 2006 Dodge 5.9 Cummins.?
I’m not really trusting my OEM, and I’m needing to purchase a monitor system anyway.
I am preparing for performance installations on my 2016 Nissan that had a premature SCR failure.. Do you think I should install Tunes first prior to installation of the new tunes and other performance installations and removal of the premature failed part? Thanks for the Videos..
I would like to see you sell those DID grills for my ‘15 RAM. That one you have is Killer.
Hey buddy I got it custom made from ctcfab.ca he can make you one too!
This is really cool....however...none of the info on this tells me anything that makes sense. LOL. I just had to have my def filter replaced on my 2021 duramax at 35k miles. Im the second owner. I just want to be able to tell when my truck is in regen mode. I never have any lights or anything on the dash. The dealer said that since I only tow my trailer with it occasionally and then take very short tripds around town...that was prob why it failed. Any ideas?
Love mine
Thank you so much you helped me make my choice 👍🏋️♀️🤺⚡️
@dark iron diesel i have a 2011 duramax 2500 lml, with a dsp5 efi live 5 pos. Switch. Could i use this to monitor all my guages and temps, but without the tuning portion from the edge tuning? I hope that makes sense, im typing this with about 2 hrs of sleep in the last 2 days lol.
Haha ya man, the edge cts3 is just a monitor. Doesn’t have any tunes on it. You can just plug it right into your obd2 and use it to monitor gauges, your dsp5 switch will work as normal.
@@darkirondiesel fuckin a Right! Thanks for the fast response!
Does anyone know if these units are available for all cars with OBD2 or is it just the makes they mention of their website.
Will this delete a factory truck or do you need to get the efi live and this?
This will not delete anything, it is only a monitor
😂 😂 your key. Have to do the same to my 02 Duramax.
The old need lot wired tho make work nice. Video bud
can you reset trans? like if ur in limp mode?
Does this show rail psi?
Can you leave these monitors in the sunlight all the time
The guys I know that have them always leave them up in the dash in the sun and haven’t had any issues
I also have the MM3 but want something like this to monitor the things the MM3 doesn't. How would that work with 1 OBD plug ?
I’m not sure. I don’t have switch on the fly tunes, so if I did it I would probably just tune with mm3, then unplug it and keep it somewhere in the truck incase I ever wanted to switch tunes, then just run the cts3 for gauges
@@quentinthomas6733 Good looking out man! 9.80$ delivered today haha
Had one since they got released still little glitchy with remote start and some other times maybe needs an update
Ya most likely would need an update if you’ve had it since released
Dark Iron Diesel nice can wireless update it connect to wifi
How does it effect the remote start?
@@sapper12e mine for some reason when I remote start it it’s blank when I turn on the truck 2 taps and it fires up
Does this make sense for a gas motor?
Talk me into getting one
I can use this on a truck that hasn’t been deleted right?
Yup
What is a Pyro Accessory?
The cable
Will this work on a Cummins?
Yep
Can you do tuning on these or is it just for monitoring?
Not yet
For 400 large ones tho?? That's a bit steep just to see some clusters
No it isn’t steep
1. Clean because you don’t have a million gauges
2. Cheaper than a million gauges
I mean I use gauges because they look better and I also have a scan gauge which was only 150$
Nice tuner. Xl t shirt any cozies
What do you mean by cozies? beer cozies?
@@darkirondiesel yep
Whenever I get the online store up and running I’ll make sure to get some!
How much are those ?
About $600 CAD
I'll buy a hat if they come in xl stretch fit.... And a shirt of course
Same stuff, different screen....Meh. I think I'll save my money. Just seems they come up with a money-grab every 3 years or so. Now..If they just would come up with a more robust EGT sensor...
Did everything BUT click on the tunes which is the only thing anyone cares to see before buying
First!