Great installation video here! Just order a 22 RGS with this mustache type engine guard and have always installed lower fairings on my previous RGS's just because I like the wind, rain, and winter air protection...but after seeing this I don't know. LOL! I told the dealer yesterday to swap out the smaller guards for the larger.....but man... I think I'd miss the cold air protection but I really like the look here.
Looks more comfortable than pegs installed on the motor guard. I'm thinking of replacing my pegs but the issue with the lean angle still bothers me a bit. I certainly looks like the mounts will scrap sooner than the floor boards would do.
I get this comment a lot, but it’s definitely understandable. I haven’t had any issues with it. I might just do a video on it and see what is the MAX lean angle 📐 we can get. Keep an eye out for that. Thank You for Watching 👍🏽
Turns out the right side had a small burr at the threaded hole that had to be filed down. After that it went in but it was still a tight fit. Left side went in better
Thank you for the video. I saw that you already answered this question but I am just double checking... are you scrapping the pegs or arms on any turns? I have seen other videos where they claim to scrap. And also how tall are you? I would assume the angle set the arm on will make a difference on the proximity of the arm ans peg to the ground. Thank you again for the video and your bike looks awesome!!!
Thank You! I have actually scrapped them once, but I also was traveling with a large amount of weight, and making a sharp turn. After I adjusted the sag on my shocks, it didn’t happen again
Hey Raider, Looks awesome! Quick question… what size / kind of deep socket did you use to reach that bolt inside the slims to tighten them down? Thanks
I ordered the Ciro Frame Mounted Adjustable Highway peg mount in Black. I don’t recall it having different sizes. I believe it’s just one standard size. Hope this helps👍🏽 Also, thank you for Watching!
Could they be reversed to be at the back of the floorboards? I know...the wife complaining about to far of a reach for highway pegs on a engine guard. Thanks
Love the look of your bike. The Thrashin Supply rider footboard is very sharp. Is that the one that measures 14" L x5" W? I bought the Ciro frame mounted highway pegs as a result of this video and obviously you don't have any fitment issues with the Thrashin footboards. 👍👍
Someone finally caught that! I sure did. I moved it back, because I decided to go with the shorter shifter lever from Thrashin Supply. It made it awkward being that far forward. I also just purchased the shorter adjustable brake arm. I’ll upload an install video once I get back from overseas 👍🏽 Thank You for Watching
I’ve actually gotten that question a few times that I’ll probably do a video on it. It’s a good question tho. I have not came in contact with the ground yet. The angle is a bit deceiving, so I can see where people would be concerned. If it did ever happened and I manage to escape that disaster, I would immediately let people know. Thank You for Watching 👍🏽
What is the vibration feedback on long rides without pads like the stock boards? I like these for greater foot area but long distance comfort is top priority.
Thank you for watching! With these new 2020 Road Glides there’s not much vibration to begin with. I have not felt any difference, but you might feel a difference if you wear shoes instead of boots while riding. Hope that helps! 👍🏽
Sweet bike, but I’m wondering if those change the lean angle and if you were to scrape in a deep turn they would just dig in and not give like the floorboards which could be and issue and could possibly cause a wreck… any thoughts? 🤔
Thank You for Watching 👍🏽 I’ve taken some tight turns with no issues. The angle is deceiving on camera. I would not recommend them for racing. Hope this helps
@@RAIDERWORLD thanks! Ya I was just wondering and maybe the camera angle did make them seem like they could be an issue. They look great but I wouldn’t want to find out the answer leaned over deep in a corner. 😂
It would have more to do with the width of the floorboards. I have wider and longer floorboards than stock, so you should be fine. Hope this helps! And Thank You for Watching! 👍🏽
What about the bolts that move floorboards out? Floorboard extenders? I believe they should work with The forward floorboards, but Will it work with both?
@@RAIDERWORLD Ciro and you should be sincere to people: tel the truth with numbers and show the pro and contro of the items that you promote, be honest and tell the truth: it reduces the lean angle of the bike, compromising stability and handling. Please do not promote just to gain few dollars something that can compromise safety of riders increasing possibility of injury and death of the rider. As such it’s not even patented.
I’m 5’ 11” and have plenty of stretch. There’s also more adjustability going forward if I needed it. I know these were made for riders who have fairing lowers.
@@RAIDERWORLD it reduces the lean angle of the bike, compromising stability and handling. Please do not promote something that can compromise safety of riders increasing possibility of injury and death of the rider.
I’ve actually gotten this question a lot. I have not had any issues with them scrapping. I definitely would not recommend them for racing though😂 Thank you for Watching 👍🏽
The “normal” HD highway peg kits. Doesn’t fit/clamp around the chopped engine guard. It has a bulge on the vertical part of the guard, where you normal could fit the highway pegs.
They definitely look like they do, but I haven’t run into any issues. These are a great alternative if you have fairing lowers. If I ever run into an issue, I will definitely address it. Thank you for Watching 👍🏽
@@bbond919 oh man! Glad your ok. Also, that’s good to know that they held up. I plan on doing a 1 year review, so I’ll definitely mention that. Thank you for sharing
it reduces the lean angle of the bike, compromising stability and handling. Please do not promote something that can compromise safety of riders increasing possibility of injury and death of the rider.
If he's leaned over that far for those pegs to hit then he's probably in a slide already. Last I knew in America he can do whatever the hell he wants to his bike, up to the individual to decide what's best for them. Layoff Karen
Great installation video here! Just order a 22 RGS with this mustache type engine guard and have always installed lower fairings on my previous RGS's just because I like the wind, rain, and winter air protection...but after seeing this I don't know. LOL! I told the dealer yesterday to swap out the smaller guards for the larger.....but man... I think I'd miss the cold air protection but I really like the look here.
Absolutely! I might change it up some day, but I’m definitely liking the feel of these so far. Thank You for the Support 🤟🏽
Beautiful bike. I like where you're going with it. Great video!
Thank You For Watching!
Just bought some of these for the fast Johnnie the other day.
That’s awesome! That’s going to look great 🤟🏽
I have the foot pegs on the chopped crash bar it should be ok to add these right.. Kinda like multiple locations to put my feet... Those look awesome.
I’m sure you could make it work. They have different position angles. Thank You for Watching! 👍🏽
Looks more comfortable than pegs installed on the motor guard. I'm thinking of replacing my pegs but the issue with the lean angle still bothers me a bit. I certainly looks like the mounts will scrap sooner than the floor boards would do.
I get this comment a lot, but it’s definitely understandable. I haven’t had any issues with it. I might just do a video on it and see what is the MAX lean angle 📐 we can get. Keep an eye out for that. Thank You for Watching 👍🏽
Nice jarhead ! Keep it coming. DFA
Haha! Thank You. Always Faithful 🤟🏽
I need something like this, badly. I have a 2020 Slim with factory floorboards. May be changed out to Defiance in the future
Thank You for Watching! 👍🏽
That bike is amazing I friggin love it well done new to your channel merry Christmas brother .
Hey, Thank you for Watching! Merry Christmas 🎅🏽
I love your Insta videos install videos I love to see what new parts you put on your bike
Thank You! I’ll keep’em coming
I couldn't get the pegs to go in with the spring washer. But i bought Harley pegs that matched the brake and foot boards . Any hints or advice?
That’s strange. I’m curious why they wouldn’t go in
Turns out the right side had a small burr at the threaded hole that had to be filed down. After that it went in but it was still a tight fit. Left side went in better
Thank you for the video. I saw that you already answered this question but I am just double checking... are you scrapping the pegs or arms on any turns? I have seen other videos where they claim to scrap. And also how tall are you? I would assume the angle set the arm on will make a difference on the proximity of the arm ans peg to the ground. Thank you again for the video and your bike looks awesome!!!
Thank You! I have actually scrapped them once, but I also was traveling with a large amount of weight, and making a sharp turn. After I adjusted the sag on my shocks, it didn’t happen again
Hey Raider,
Looks awesome! Quick question… what size / kind of deep socket did you use to reach that bolt inside the slims to tighten them down? Thanks
Hey! Thank You for Watching 👍🏽 it’s a 12 point ARP bolt, and I believe the size was a 3/8 12 point deep socket.
Nice looking bike.
Thank You for Watching!
Did you order the standard or extended version? I’m conflicted as to which to order. Gonna try and measure before I order. Thanks in advance.
I ordered the Ciro Frame Mounted Adjustable Highway peg mount in Black. I don’t recall it having different sizes. I believe it’s just one standard size. Hope this helps👍🏽 Also, thank you for Watching!
How are those footboards in the rain? It seems like they would be quite slippery being made of metal.
Thank you Watching! I live in Florida where it rains constantly and haven’t had a problem with slipping.
Could they be reversed to be at the back of the floorboards? I know...the wife complaining about to far of a reach for highway pegs on a engine guard. Thanks
They can not be reversed, but they have these for the passengers th-cam.com/video/9eGZIEtGFs8/w-d-xo.html
@@RAIDERWORLD much appreciated!
Are those the extended version or standard?
These are the standard version.
Love the look of your bike. The Thrashin Supply rider footboard is very sharp. Is that the one that measures 14" L x5" W? I bought the Ciro frame mounted highway pegs as a result of this video and obviously you don't have any fitment issues with the Thrashin footboards. 👍👍
Thank You! And That’s awesome. I’m actually traveling to Oklahoma from Florida right now, so those Highway pegs and mounts are working out great!
does this highway peg interfere with lean angle
It does not. I thought it would at first, but it hasn’t effected any turning
Watched your floorboard install vid and in this one it looks like you might have changed the floorboards to move back? If so, may I ask why?
Someone finally caught that! I sure did. I moved it back, because I decided to go with the shorter shifter lever from Thrashin Supply. It made it awkward being that far forward. I also just purchased the shorter adjustable brake arm. I’ll upload an install video once I get back from overseas 👍🏽 Thank You for Watching
@@RAIDERWORLD Looking forward to it.
Will they scrape the ground if you make a tight turn?
I’ve actually gotten that question a few times that I’ll probably do a video on it. It’s a good question tho. I have not came in contact with the ground yet. The angle is a bit deceiving, so I can see where people would be concerned. If it did ever happened and I manage to escape that disaster, I would immediately let people know. Thank You for Watching 👍🏽
Thank you Bro!
Can those pegs be used for the passenger if you wanted too? What bracket would you need? Thanks
They actually have dedicated passenger mounts here shrsl.com/3vsod
Bike is Clean
Thank You for Watching!
What is the vibration feedback on long rides without pads like the stock boards? I like these for greater foot area but long distance comfort is top priority.
Thank you for watching! With these new 2020 Road Glides there’s not much vibration to begin with. I have not felt any difference, but you might feel a difference if you wear shoes instead of boots while riding. Hope that helps! 👍🏽
@@RAIDERWORLD I was thinking the same. I have a '19 RGS. I do wear boots primarily. Certainly for long riding. Thx for insight. Bike looks great. 🤙
Sweet bike, but I’m wondering if those change the lean angle and if you were to scrape in a deep turn they would just dig in and not give like the floorboards which could be and issue and could possibly cause a wreck… any thoughts? 🤔
Thank You for Watching 👍🏽 I’ve taken some tight turns with no issues. The angle is deceiving on camera. I would not recommend them for racing. Hope this helps
@@RAIDERWORLD thanks! Ya I was just wondering and maybe the camera angle did make them seem like they could be an issue. They look great but I wouldn’t want to find out the answer leaned over deep in a corner. 😂
@@TaterGrabbinBass for sure! Same here. I would definitely update if that ever happened
Gotta get those
I definitely use them all the time 👍🏽
That’s slick
Thank you for watching!
Beautiful.. Sir 👍
Thank you for watching!
Do you know if these will work , with extended floorboards (1 1\4" ) ? Great video !
It would have more to do with the width of the floorboards. I have wider and longer floorboards than stock, so you should be fine. Hope this helps! And Thank You for Watching! 👍🏽
What about the bolts that move floorboards out? Floorboard extenders? I believe they should work with The forward floorboards, but Will it work with both?
Does that effect your lean angle
They haven’t effected me “yet” I guess it all depends how aggressive you are when taking turns.
@@RAIDERWORLD Ciro and you should be sincere to people: tel the truth with numbers and show the pro and contro of the items that you promote, be honest and tell the truth:
it reduces the lean angle of the bike, compromising stability and handling. Please do not promote just to gain few dollars something that can compromise safety of riders increasing possibility of injury and death of the rider. As such it’s not even patented.
@@linhnha1339 Nope, I still lean the same. No issue for me, and I lean until the exhaust scrapes.
I’m 6’5” do you think that’s would be enough stretch for my legs??
I’m 5’ 11” and have plenty of stretch. There’s also more adjustability going forward if I needed it. I know these were made for riders who have fairing lowers.
@@RAIDERWORLD it reduces the lean angle of the bike, compromising stability and handling. Please do not promote something that can compromise safety of riders increasing possibility of injury and death of the rider.
@@linhnha1339 stay away from me on the road, you’re scary.
Does this not kill your ground clearance when cornering?
I have not run into any issues.
I'm concerned these wont work for me. I'm 5.6
They are adjustable, so it should work. I’m 5’ 11”
When riding and going into a corner do they scrape by any chance?
I’ve actually gotten this question a lot. I have not had any issues with them scrapping. I definitely would not recommend them for racing though😂 Thank you for Watching 👍🏽
Why the preference for these vs. a simple crash bar peg install?
Honestly, it’s all riders preference. I liked the way these look and feel. It’s something different. 👍🏽
The “normal” HD highway peg kits. Doesn’t fit/clamp around the chopped engine guard. It has a bulge on the vertical part of the guard, where you normal could fit the highway pegs.
Would you happen to have the part number for those Footpegs?
The foot-pegs I have on the Ciro Highway mounts are the Thrashin Supply Company TSC-2021-1 P-54
Slim Footpegs - Black amzn.to/3JJDXIM
Thank you so much! Love the bike!!!
@@justinneumeier Absolutely! No problem.
It’s nice but looks like it reduces lean angle drastically!!!
They definitely look like they do, but I haven’t run into any issues. These are a great alternative if you have fairing lowers. If I ever run into an issue, I will definitely address it. Thank you for Watching 👍🏽
What seat do you have on your bike
Thank you for Watching! Here’s the link to the video I did on it th-cam.com/video/XyRUUydbQv4/w-d-xo.html or just check out the channel
Looks like it will brake if you lay the bike on the side.
Probably don’t wanna lay your bike on it’s side anyway. But if that does happen, maybe it will act as an extra crash bar
@@RAIDERWORLD had a tip over due to wind.. these saved my black crash bar and only a tiny place on my peg ,bag corner got scratched .
@@bbond919 oh man! Glad your ok. Also, that’s good to know that they held up. I plan on doing a 1 year review, so I’ll definitely mention that. Thank you for sharing
😎🍺🍺🍺🍺🍺🍻👍🏻
🇺🇸🍺👊🏽
it reduces the lean angle of the bike, compromising stability and handling. Please do not promote something that can compromise safety of riders increasing possibility of injury and death of the rider.
I am not paid or sponsored by any companies. But thank you for watching and expressing your concerns.
If he's leaned over that far for those pegs to hit then he's probably in a slide already. Last I knew in America he can do whatever the hell he wants to his bike, up to the individual to decide what's best for them. Layoff Karen