This review/instruction is spot on! I couldn’t have removed and installed the brake arm without you, thank you. I must have watched some portions of your video 6 to 10 times over just to make sure I was doing it correctly. Again, thank you so much!!!
Instead of fighting that cotter pin. unbolt the rear master and pull it away from frame, it has some give and will make removing the cotter pin easier. Great install video to.
Thanks for you help man! This video was beneficial even for other brake arms. It helped me locate the parts behind the brake to take the stock lever off. Appreciate you! 🇺🇸
@@RAIDERWORLD heck yeah man, nobody realizes it but every project takes us 3 times longer to do because were recording. And thats not even counting the editing time ha.
Very helpful video. I have no idea where that cotter pin went 😅 I will find it. I’m doing a Santoro Fabworx just the tip brake arm for the moment. This is a great vid. Love TS’s stuff and do run it as well.
Great video. When i installed mine the position and comfort is great. But I feel a little “break” like it’s almost got a click(inaudible) right when it engages the break. Wonder if this is normal or I should take apart and reinstall? Bike operates normal but I didn’t notice this with the stock brake.
After my bike accident a couple years ago, I had numerous right ankle and leg surgeries. This brake pedal definitely makes a huge difference in comfort.
@@RAIDERWORLD I am sure!!! THe stock one puts your ankle at a "querky" angle if you ride "covering" the rear brake (LOT of sportbike riders still do this instinctively along with 2 fingers on the lever as well). Luckily I only have knee problems vice ankle... :D Have a fantastic Christmas Brother!!!
can the old brake pad you had on there work on older softail models? also do you know if there is a way to make that brake arm fit older softail bikes? i really like their products but the brake side seems to be non existant for older softail models.
I haven’t tried to fit it on anything else, but I’m sure there is a way to modify it. I believe Thrashin Supply gears more towards newer models, but I would email them and ask
@RAIDERWORLD yea I emailed them. My bike is a 2008 so hopefully it can be done bolt on but if not I may have to modify something to make it all work. Seems like most companies gear towards newer bikes and mainly touring bikes which sucks for those of us that have non touring bikes. Haha.
Thanks for the detailed video. In reading the comments, and your replies, I noticed you suggested a couple times that you'd rather have the stock length arm. Why exactly? They are having a Black Friday sale and I am about to pull the trigger on this setup but I'm trying to decide between the long and short lever. The short looks good but it seems to me the long would give me more 'leg room'. Do you have that set at the lowest setting? What are your thoughts? Thanks!
The shorty is nice, but it takes up some of the real-estate of the floorboard. It does not allow my foot to go all the way forward on the board, especially if I’m wearing boots
@ im on the page looking for different colored ones… dont see them unless im absolutely blind lol. I wish they did different colors I think they would do a lot more sales for sure. I need bronze accents to go with my RG ST. I just have their all black floorboard, brake pedal, shift pegs, shift arms and shift linkage
Good stuff! I’ve been looking at Thrashin’s stuff for a while and think I’m gonna pull the trigger on everything for my feet. Is that brake pedal actually just a regular P54 peg? On their site, they don’t even have that as a “brake” peg, but Revzilla does and it only comes in black. But I want red lol. Just curious, I’ll just get the red P54’s.
Thank You! So, I’m 5’11”. Honestly, I would probably change out to the stock length. I’ve been riding with this one for a while now, and while I love it, it does take up some of my forward floorboard space. Hope this helps 👍🏽
I contacted the company and the adjustable brake arm will work on the 02-13 touring models with their Adjustable Brake Arm Bushing Kit. I installed it on my 06 CVO Ultra. It's one of my favorite upgrades to my bike.
This review/instruction is spot on! I couldn’t have removed and installed the brake arm without you, thank you. I must have watched some portions of your video 6 to 10 times over just to make sure I was doing it correctly. Again, thank you so much!!!
That’s awesome! Thank You. That’s what its all about! Definitely an amazing product
I’ve been running this break arm for about a year now.
I have the short version set in the lowest position.
Love it.
I absolutely love this product!
Thanks again for all the step by step instructions. Mine didn’t go on as easy, but it worked out.
Ride safe
Thank You! Glad this video helped. Yeah, some go on easier than others lol
Thank you for the detailed video! I'm installing my Thrashin brake arm and pedal today and greatly appreciate your help!
Absolutely! I’m glad the video was helpful. Thank You for the Support
Instead of fighting that cotter pin. unbolt the rear master and pull it away from frame, it has some give and will make removing the cotter pin easier. Great install video to.
Definitely! Thank You
I just installed my Thrashin adjustable brake arm & your video was VERY helpful! Thank You!!!
That’s awesome! I’m glad the video helped. Thank You for the Support 🤟🏽
Thanks for you help man! This video was beneficial even for other brake arms. It helped me locate the parts behind the brake to take the stock lever off. Appreciate you! 🇺🇸
Absolutely! I’m glad this video was helpful. Thank You 🤘🏽
Hope you had a very merry Christmas to you and your family ride safe and enjoy I always enjoy watching
Same to you! And Thank you for Watching 🙏🏽
Dude, really good install video.. super clear and professional, very clean.
Hey! Thank You. Definitely a lot of work when filming these, but you already know that 👍🏽
@@RAIDERWORLD heck yeah man, nobody realizes it but every project takes us 3 times longer to do because were recording. And thats not even counting the editing time ha.
Absolutely! But it’s always cool to see in the end result.
@@RAIDERWORLD oh yeah. Completely worth it.
The pedal is so much easier to get to. I have one on my bike and it is definitely worth every penny.
Definitely a game changer!
Thank you for the video. Other than removing and reinstalling the cotter pin, it is an easy job.
Absolutely! Patience and Ninja Fingers. Thank You for the Support 👍🏽
Very helpful video. I have no idea where that cotter pin went 😅 I will find it. I’m doing a Santoro Fabworx just the tip brake arm for the moment. This is a great vid. Love TS’s stuff and do run it as well.
Oh no! Not the cotter pin lol. I’ve done that. I have a few extra laying around just in case that happens. I’m glad this video was helpful 🤘🏽
Very nice product, good video. Nice bagger 👍🏽.
Thank You for the Support! It’s definitely appreciated
Love that look.
Thank You! I definitely love the comfort too
@@RAIDERWORLD I bet. You know I think I may do this mod to my Street Glide hopefully here in the spring.
Another great video. Loved it.
Thank You! 🤟🏽🇺🇸
@@RAIDERWORLD doooooood. You make the best videos. Really enjoy every one you make. Stuart.
@@stuartberke5845 Thank You! Definitely means a lot 🤟🏽🇺🇸
great vid. easy to follow
Thank You! I’m glad it was helpful
Great video. When i installed mine the position and comfort is great. But I feel a little “break” like it’s almost got a click(inaudible) right when it engages the break. Wonder if this is normal or I should take apart and reinstall? Bike operates normal but I didn’t notice this with the stock brake.
Thank You! There are more moving parts with this brake lever, so that might be it. Make sure to locktite and tighten it down snug
LOVE Thrashins stuff!!! I ended up with Flo Motorsports on mine but it would have been nice to have an adjustable one.
After my bike accident a couple years ago, I had numerous right ankle and leg surgeries. This brake pedal definitely makes a huge difference in comfort.
@@RAIDERWORLD I am sure!!! THe stock one puts your ankle at a "querky" angle if you ride "covering" the rear brake (LOT of sportbike riders still do this instinctively along with 2 fingers on the lever as well). Luckily I only have knee problems vice ankle... :D Have a fantastic Christmas Brother!!!
Nice tools.. very functional
Thank You!
can the old brake pad you had on there work on older softail models? also do you know if there is a way to make that brake arm fit older softail bikes? i really like their products but the brake side seems to be non existant for older softail models.
I haven’t tried to fit it on anything else, but I’m sure there is a way to modify it. I believe Thrashin Supply gears more towards newer models, but I would email them and ask
@RAIDERWORLD yea I emailed them. My bike is a 2008 so hopefully it can be done bolt on but if not I may have to modify something to make it all work. Seems like most companies gear towards newer bikes and mainly touring bikes which sucks for those of us that have non touring bikes. Haha.
@@MrBAshwood Absolutely. I know DK Customs and LowBrow Customs have some cool stuff as well.
First ! Just ordered my set up today !
Heck yeah! I’m definitely enjoying mine
Another awesome video
Thank You!
Know what size that bolt is ?
Unfortunately no. I would have to uninstall it to find out
Thanks for the detailed video. In reading the comments, and your replies, I noticed you suggested a couple times that you'd rather have the stock length arm. Why exactly? They are having a Black Friday sale and I am about to pull the trigger on this setup but I'm trying to decide between the long and short lever. The short looks good but it seems to me the long would give me more 'leg room'. Do you have that set at the lowest setting? What are your thoughts? Thanks!
The shorty is nice, but it takes up some of the real-estate of the floorboard. It does not allow my foot to go all the way forward on the board, especially if I’m wearing boots
Will that pedal mount to stock brake lever
This pedal will not. But they do carry a stock pedal replacement www.thrashinsupply.com/products/black-bagger-brake-pad-new
How did you get the p54 peg red???/
I ordered it that way. Do they not sell them in that color anymore?
@ im on the page looking for different colored ones… dont see them unless im absolutely blind lol. I wish they did different colors I think they would do a lot more sales for sure. I need bronze accents to go with my RG ST. I just have their all black floorboard, brake pedal, shift pegs, shift arms and shift linkage
Awesome Video, thanks
No problem! Thank You for watching
Is that available brakeout 117??
I don’t believe so, but you can check their website or customer service to confirm
Good stuff!
I’ve been looking at Thrashin’s stuff for a while and think I’m gonna pull the trigger on everything for my feet.
Is that brake pedal actually just a regular P54 peg? On their site, they don’t even have that as a “brake” peg, but Revzilla does and it only comes in black.
But I want red lol. Just curious, I’ll just get the red P54’s.
That’s awesome! I would email them directly and tell them you want red. That’s how I went about it, just to make sure I was getting the correct part.
Hey man sweet install video! How tall are you? Debating on getting one for myself, but can’t decide between the short or stock version.
Thank You! So, I’m 5’11”. Honestly, I would probably change out to the stock length. I’ve been riding with this one for a while now, and while I love it, it does take up some of my forward floorboard space. Hope this helps 👍🏽
How do you like the short brake arm? I’m 5 11 can’t decide on stock length or short.
Honestly, I would probably change to the Stock length arm.
@@RAIDERWORLD Why would you change for a stock length because you can't
get your foot underneath the short one in the highest position?
I like it.
Thanks for the great vid. If you're interested in selling that old brake pedal I'm interested.
Thank You for supporting the channel! Dang, it actually just sold! Lol
Who can afford these wow! I like but can imagine spending that amount and it's separate 😂
Yeah lol, they are kinda pricey. Its a small company, and you do get what you pay for. It’s definitely a quality product 👍🏽
Wish they made one for the 2013 and down baggers
It might be, because they’re a small company. I know they ride a lot of dynas and softails. But I get what you mean
I contacted the company and the adjustable brake arm will work on the 02-13 touring models with their Adjustable Brake Arm Bushing Kit. I installed it on my 06 CVO Ultra. It's one of my favorite upgrades to my bike.
⚡
👍