VCDS CODING
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- #checkengineplusminus #checkengine
00:00 - Intro VCDS CODING
00:06 - Unlocking Webasto Aux. Heater VCDS
01:43 - Cooling Fun Output Test VCDS
04:34 - VCDS Idle RPM correction
05:35 - Camera How to active enable rear view camera on VW VCDS
06:42 - VCDS Lock/Unlock acoustic confirmation
07:12 - How to activate VW needle sweep VCDS,Indicator celebration
08:54 - VCDS Automatic closing of windows when rain detected
09:37 - VCDS Audi needle sweep / gauge test Audi activation
10:57 - VCDS Key Reminder Deactivation,key ignition warning
11:30 - VCDS Auto Scan Auto-Scan function
12:12 - VCDS Cornering lights with fog lights / coming home
12:52 - VCDS DRL Dim When Turn Signal Active
13:19- VCDS How to activate Vw Auto-lock/unlock system
13:54 - VCDS Wing Mirrors Synchronization
14:19 - VCDS Seat belt warning
14:48 - VCDS Disable Bulb warning
15:22 - VCDS How to Change Start Screen RNS-E
15:41- VCDS Automatic rear wiper with reverse gear
16:02 - VCDS Digital Speedometer in radio Concert
16:35 - VCDS Outside Temperature on the dashboard
16:55 - VCDS Bose intro logo activation Radio Concert 2
17:14 - VCDS Themes On RNS-510
17:36 - VCDS Selektive Central Locking Activation
17:55 - VCDS Microphone Sensitivity Handsfree bluetooth
18:15 - VCDS Steering Assist Power Adjustment
18:36 - VCDS Tailage Button Activation
18:55 - VCDS Emergency brake flashing
19:27 - LAMBDA SONDA TEST VCDS
20:49 - VCDS Hill Hold Control Extra Options
21:14 - VCDS Refuel / Volume to be replenished
21:34 - VCDS Auto lock after 15kmh Auto lock unlock system
21:54 - VCDS Gearshift indicator activation
22:14 - VCDS Driver Seat Heating Memory
22:35 - VCDS Paddle Shifter Activation
22:55 - VCDS Push to Talk Button as a mute
23:15 - VCDS Windows roll up & roll down via remote
23:35 - VCDS DRL Indicator light in the cluster
23:56 - VCDS Footwell lighting dimming
24:14 - VCDS real mileage
25:57 - VCDS US style - turn signal as parking light
26:18 - VCDS Cruise control activation
29:11 - VCDS coding for footwell lights
29:31 - VCDS Fog lights as DRLs Daytime running lamps
29:50 - VCDS Rear fog light as reverse light
30:12 - VCDS Fog lights as Parking Lights
30:32 - VCDS Comfort turn signal max 5 flashes
30:52 - Best Vcds Tweaks & Codes in BCM
Ultimate Guide to VCDS Coding | Master Every Feature and Function
Welcome to our all-inclusive guide to VCDS coding, where we demystify this powerful automotive tool and help you unlock its full potential.
Whether you're an amateur car enthusiast or a professional mechanic, this TH-cam channel is your go-to resource for understanding the intricacies of VCDS coding. We cover all the features, functions, and possibilities that VCDS offers, empowering you to take control of your vehicle's performance and customization.
In our comprehensive video tutorials, we dive deep into various topics, including:
VCDS basics and setup: Get started with an introduction to VCDS, its installation process, and configurations to ensure seamless coding operations.
List of coding options: Discover a vast range of coding possibilities, from enabling hidden features to customizing your vehicle's behavior, comfort settings, and more.
Advanced adaptations: Learn how to make advanced adaptations using VCDS, such as coding specific modules, adjusting fuel injection parameters, programming keys, and much more.
Fault code scanning and clearing: Explore the diagnostic capabilities of VCDS, including fault code reading, troubleshooting, and clearing for a healthier and more efficient vehicle.
Retrofits and upgrades: Unleash the full potential of your vehicle by retrofitting advanced features like LED lighting, multimedia interfaces, parking sensors, or even upgrading your engine's performance through tuning.
Professional tips and tricks: Gain insider knowledge from experienced VCDS coders through expert tips, tricks, and troubleshooting techniques to enhance your coding efficiency and success rate.
Our goal is to empower you with the knowledge and skills to confidently navigate the VCDS coding landscape. Join our growing community of like-minded enthusiasts, share your experiences, and learn from others as we unlock the hidden potential of vehicles through VCDS coding.
Don't miss out on any updates. Subscribe now and turn on notifications to stay up to date with the latest VCDS coding tutorials, in-depth guides, and emerging coding trends. Get ready to take your vehicle customization to a whole new level with VCDS!
#VCDS #VCDScoding #CarCoding #AutomotiveCustomization #VehicleTuning #CarEnthusiast #DIYCoding
,VCDS fault code
,Car diagnostics
,VCDS scanning
,Automotive software
,Car programming
,VW coding
,Audi coding
,Skoda coding
,Seat coding
,Coding specialist
,Car modifications
,ECU coding
,VCDS
,VCDS programmer
,VCDS tweaks
,VCDS coding tips
,VCDS secrets
,VCDs coding solutions
,ECU adaptations
,Car troubleshooting
,VCDS coding community
,VCDS coding guide
,Professional car coding
,Auto coding solutions
checkengineplusminus@gmail.com - ยานยนต์และพาหนะ
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
Write in a comment what car and engine you have, as a community we will be able to help each other 😀🤩
I have an Arteon SEL r line FWD, and the newer wifi device.
you are a legend :D subscribed :)
Amazing !!!
Is it possible to change dial speed from mph to kph virtual cockpit 2020 gte
👍
Very useful video. But it wouldn't be bad to add an option in which the factory settings are returned, in case of a possible error.
If you make a backup then you'll be able to do just that
@@jigler If a copy is not made, is there an option?
@@jiglerhow I can do backup ?
@@kenzomartinezblanco120 Run an auto scan and save it
Hello the code for control cruise is compatible for a vw golf gti 2014 automatic?
Hello. Do you know how to change the starting temperature for webasto heating. Origin is starting at 3° and below. Aux webasto heating. I would like to change this temperature. Thank you
Meaby try this : 1. Open VCDS and select “Select Control Module”.
2. Navigate to “08-Auto HVAC” or the specific module for auxiliary heating.
3. Click on “Adaptation - 10”.
4. Search for the adaptation channel that controls the activation temperature for the Webasto heating system. This might be labeled something like “Temperature threshold for auxiliary heater” or similar.
5. Change the adaptation value to the desired temperature. For instance, if the default setting is 3°C, change it to a higher value like 5°C or as needed.
6. Save the new setting and exit the adaptation menu.
7. Conduct a full system scan to ensure no errors have occurred due to the changes.
8. Test the system to make sure the Webasto heater now activates at the new set temperature.
😁😁😁
✌️
What a great video for VCDs
I have a 2013 Golf TSI, they changed the headlight bulbs or bulbs in the high low, quarter and fog lights with LED bulbs and then the yellow warning light comes on in the cluster like (bulb burned out), how can you change the bulb or bulb option? bulbs to LED and turn off the blown bulb warning light?
I hope you can help me, I will greatly appreciate it.
Thanks greetings-
ledurile nefiind canbus nu o sa reusesti ,numai daca le inseriezi cu o rezistenta sau gasesti la chinezi chituri rezistente pentru asa ceva
I need help with my vw Amarok 2019 trendline, my high beams are not working, I was trying to enable some nice tweaks but I think the high beams got changed and know the winks are not working, where should I got to program de code again and came back working again. The bulb is h15
Make sure the car is on level ground and that the suspension is settled
Procedure 1
1. Select Xenon range control module @ address hex55
2. Select Basic Settings
3. Select Basic headlamp setting and start the procedure
4. This is where you would adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target - but in your case go to the next step
Wait a period of time (suggest 3 seconds) - then stop the procedure
1. Procedure 2 (still in Basic settings in hex55 module)
2. Select Acknowledge basic setting and start the procedure
3. The reference settings from Procedure 1 above should now be "recorded" in the module
Wait a period of time (suggest 3 seconds)- then stop the procedure
Back-out of the module, clear any error codes and exit the software (don't forget to disconnect the dongle)
What's the Login Code for an Instrument Cluster kindly
Hello. Does anyone know how to code for the AUDI Q5 FY-2017, with an electric trunk. I would like to close it both from the remote control and from the car from the button next to the driver on the door, to close the trunk. I can only do it now open and close only from the button on the trunk. Thank you
Go to Controller 6D - Trunk Electric
16 - Security Access -
10 - Adaptations
Activate from drop down menu
Hello, try this : Detailed steps for coding:
1. Open VCDS and select “Select Control Module”.
2. Navigate to “46-Central Convenience”.
3. Click on “Adaptation - 10”.
4. In the adaptation channels, find the settings related to the trunk operation:
• Search for channels like “Comfort operation: Remote control closing” and “Comfort operation: Interior button closing”.
5. Change the value of “Comfort operation: Remote control closing” to “Active”.
6. Change the value of “Comfort operation: Interior button closing” to “Active”.
7. Save the changes and exit.
8. Run a full system scan to check for errors.
9. Test the trunk operation using the remote control and the interior button next to the driver.
@@CheckEnginePlusMinus Thank you. You manage to give me the values of each IDE0.....MAS..., THIS CANNOT BE MISTAKED. I ALSO LEAVE YOU A VIDEO OF WHAT I DID
Do you know how to adjust Matrix headlights of a Passat B8 2022
Make sure the car is on level ground and that the suspension is settled
Procedure 1
1. Select Xenon range control module @ address hex55
2. Select Basic Settings
3. Select Basic headlamp setting and start the procedure
4. This is where you would adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target - but in your case go to the next step
Wait a period of time (suggest 3 seconds) - then stop the procedure
1. Procedure 2 (still in Basic settings in hex55 module)
2. Select Acknowledge basic setting and start the procedure
3. The reference settings from Procedure 1 above should now be "recorded" in the module
Wait a period of time (suggest 3 seconds)- then stop the procedure
Back-out of the module, clear any error codes and exit the software (don't forget to disconnect the dongle)
I have VW Scirocco MK3 2011, how could I deactivate the 3rd tail light which was performing both tail light & brake light? The point is I bought the LED strobe light, which I'd to replace existing halogen one. After replacing the strobe brake light works fine, but then tail light is on, the strobe brake light is flickering... I do not know how to put some load resistance in, so I thought if I could deactivate the tail light function while brake light is still active, it would serve my need..
To resolve the issue with the third tail light and strobe brake light on your VW Scirocco MK3 2011, you can use VCDS (VAG-COM Diagnostic System) for coding. Here is a step-by-step guide:
1. Connect VCDS to your car:
• Plug the VCDS cable into the OBD-II port of your car.
• Connect the other end of the cable to your laptop.
2. Open VCDS Software:
• Launch the VCDS software on your laptop.
3. Access the Central Electronics Module:
• Select “Select Control Module.”
• Choose “09-Cent. Elect.”
4. Adaptation Settings:
• Click on “Adaptation - 10.”
• Search for the adaptation channel related to the tail light function. It might be listed as “Leuchte23SL HLC10” or similar, depending on your car’s specific setup.
5. Deactivate Tail Light Function:
• Find the setting for the tail light function (look for something like “Light Function A” or “Light Function B”).
• Change the value to “not active” or a similar setting that indicates the function is deactivated.
6. Save the Changes:
• Click “Do It!” to save the changes.
@@CheckEnginePlusMinus Many thanks.. I will try tomorrow
Hallo,
kann mir jemand sagen, wie ich beim VW Bus T 6.1 die Start-Stop Funktion deaktivieren kann?
Besten Dank und Gruß Peter
19 CAN-bus interface
Adaptation 10
Select: 'Start_stop voltage_limit'; change that from '8.2V' to '12V'
Hello can i code the taillights from us to eu after replacing them
To code the taillights from US to EU after replacing them using VCDS, it depends on the specific car model you have. The process may vary, and some vehicles may require additional steps or coding adjustments. Please provide the make, model, and year of your car for more precise instructions.
@@CheckEnginePlusMinus its an audi q3 2016
@@CheckEnginePlusMinus audi q3 2016 any suggestions
How Audi A6C7 ?
Hi, what did you want to code?