Castle Copperhead Brushless TRX4 Traxx
ฝัง
- เผยแพร่เมื่อ 4 มิ.ย. 2024
- AWESOME IMPROVEMENT!!!! It slings em now!! I gotta work on these tracks now
Castle CopperHead ESC
Amain bit.ly/3JCXryz
Amazon amzn.to/3upucZC
Ebay ebay.us/78TzM4
Horizon bit.ly/3DaZqrt
Castle 2850kv Slate Motor
Amain bit.ly/3wAIRnn
Amazon amzn.to/3tM1LGp
Ebay ebay.us/35F9XX
Horizon bit.ly/3wBcC7O
Traxxas TRX4 Traxx
Amazon amzn.to/3wxGt0H
Ebay ebay.us/jwpCmf
traxxas.com/products/landing/...
CHANNEL MEMBER INFO
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
#rc #rccars #traxx - บันเทิง
Traxx or no traxx RC ‘s are always a blast to watch & use. Always entertaining & interesting thanks for all your RC knowledge & entertainment.
Thanks 👍
@@ExocagedRC what esc and motor combination is that
POWER!!! Great updates. Thanks for showing👍
This guy reads my mind , I just put a castle copperhead and deep terrain traxx on my trx4 and was hoping someone else would do it too
great minds think alike!!
I went mamba x and HH 540-L 2700kV. Can confirm patio donuts with a layer of snow on there, it's unreal how much more power than stock it has.
Can confirm, the electronics can definitely handle 7.4V and have happily for several years. Go back in and get that free performance my man!!
Yup I have been running mine at 7.4v for 3 years on the stock tx/rx.
really? Well I'll give that a try with the new servo.
I love my Traxx. To turn those beasts I use the Reefs 777 servo. You may want to out the news Reefs 1100.
So strange how the trx4 panhard mount is molded into shock tower. After one year my trx4 has not broken a panhard mount. On my scx 10 3 i break panhard mounts often. Recently axial made a metal panhard part #axi231041 as used on the new axial bronco. I enjoy both trucks. The trx4 is the best with 2 speed and locking diffs. My trx4 has approx 200 run hours and no major break downs. Drive it hard every day . Trx4 is a great truck.
Yup
I haven't broken them but they flex a lot when a strong servo is used
Hey love your attention to detail. Trax is diverse. Have a kick ass day
Gotta try the 3brc direct power servos
The two speed kit from traxxas was the best thing I’ve done for mine so far.
I just ordered this I'm pretty excited for it to get here it will be my 1st RC
How about that s c x 6 on tracks? Oh man! Holy Toledo!
Love the results of the mod's, but they are rather costly. Ouch. Thanks for the videos.
I run 15° of timing. And 20° of cheat timing. Set it to come in around 40k rpm and full engage at 55k. So it only has STUPID POWER when you hit full throttle. Only for trailing and messing around. When crawling it doesn't activate. Not in the rpm band to do so 👍
I'll be trying a 3800kv motor soon
@Exocaged RC hopefully the traxx live. Cant wait to see how you band them. Id suggest 30lb test and some ca glue
I really like my sport with trax it's a tone of fun in the woods, dirt and streams...great trail truck...
I've had a 3800kv/ mamba x combo in several trucks over the last 3 years. More than any of my crawlers really need
Those traxx are rubber, so if you make them tight when it's warm out, they will be super tight (possibly to the point of binding or tearing) when it's cold and snowy out.
Just a head's up Exo, there is no need to save after each page on the Copperhead/Mamba Castle link. You can simply go to each tab and make your changes, then save once you've changed everything!
yeah I know its just a habit I've got into and can't get out of it.
Glad it worked better. Definitely ready to see you mod on them. My twin is alot lighter than a trx4. Well maybe not a lot and i still get a lil slip too
yeah man I hope to get on the track mods this weekend
Awesome! Excited to see more.
Cool cool cool place in the back! I’ll be having me some tracks for My trx4 Before winter ❄️ next year. I really enjoyed it 👌💯.
Impressive test drive… and like the look with that body 👍👍👍
you can put screws in the tracks same as you do with a snowmobile !
I built one of them trucks I put a 1/8 scale 8's traxxas motor in it sold it on ebay now the truck lives where it snows .it was very strong gear mod .I had the red land denfinder body on it .
I’d run 9t on pinion almost has 2in1 feel such low gearing nice build!
The traxx are great with more power. I’ve been liking the 18/39 gearing myself. I bet it yours will climb that dirt hill a lot easier with that small change. Great vids!
Awesome video.. thanks man I just installed mine ! On my sport !
It’ll be interesting to see how they do after your mod. Now they probably wouldn’t slip at all in sand, dirt, snow, or mud but it would be cool to get slip free rock crawling out of them 😁
the deep tracks are 30 odd on amazon if thats what your meaning, not the running gear
That's sick. 🔥
That's cool bro. Just got mine about 2 month's ago. And was wondering about mods myself. Way to many unboxing videos this winter. Time to do all my first runs. Then mods. Then 2nd runs. Ect. I'm backed up. But that's a good thing .
Joe I bought my Traxxas Traxx over the winter for some snow fun and omg was it fun!!! When I purchased mine I realized the orange body showed coming with the the deep tread tracks, the original traxx set and a set of wheels but the blue body box didn’t show both track sets so I went orange body🤷♂️🤷♂️ IMO the TRX4 Traxx RTR is on of the best valued TRX you can get. I’ve been wondering how it would handle the brushless power and it seems to be just fine. 👊👊👍👍
My traxx will almost climb a wall if they can get traction. I don't use them very often, but they are fun to run. I have a hobbywing axe r2 3300kv system in mine. 2nd gear is a hoot
Now he will track for the Scx6
The best esc for crawler Copperhead
Do you have the "crawler edition" esc or just the standard one? I'm trying to figure out what the differences are if any?
Hi congrats on retirement!!! Quick question. Would a castle sensored crawler edition 1406 1900kv and a copperhead esc be good in the ryft? I had the speltrum 1900 kv 1415 in it before Thanks.
How did you tighten the tracks?
Hi I have the same motor and ESC and am using the TQI remote which came stock with the trx6 but the motor won’t work. But I don’t think it is the receiver because the servo works do you have any ideas
i got my traxx this winter and ran it through the snow with fairly good success however I did have the drive sprocket get packed with ice and had complete skipping issues but I would say the traxx is absolutely awesome even with some minor mechanical issues i can't wait to see what you do with yours
You have to leave your truck out in the winter to acclimate for like an hour or so if you don't do that the snow will melt on the tracks on turn into ice and will start skipping
@@T_gaming28 you're exactly right about that and when it started to freeze up I remembered reading something about acclimating the tracks to the temperature but who has time for that lol.
@@rcmikeklein5512 yeah it was happening to me and I couldn't figure out why then I just read the papers again
how did you tighten your tracks
Do you know any technical stuff on the copperhead yet
I have a 11lbs trail truck would this system work for me?
I was going down a decent yesterday with mine and in started clicking in the transmission and driving me nuts . I’ve taken all apart and put back with shims etc etc still clicks . Might go to metal transmission housing see if that helps . Works fine just annoying lol
Check your driveline screws
Could try a Power HD T70-12V?
Braided fishing line?
how do you get the traxx for 30?
Wait, i heard you say something about adjusting the traxx’s ? I have looking everywhere on how to adjust them , make them tighter. Do you have a video on this?
Gosh it’s not hard look at front two boogie wheels they have threaded rod Take tracks off unscrew 2 turns
@@uan588 ok thanks,
Awesome vid! I’m in the Jax area, where is this located? Love to find some new spots in the area. Thanks.
1714 Freedom Dr in Middleburg, I'm opening it up this sunday to the public.
@@ExocagedRC I have a buddy and we will be there! Appreciate your hard work. Thank you.
@@ExocagedRC what time do you plan on opening her up?
What do you think of the copperhead?
Why my copperhead10 cogging even i use sensored motor? Btw im buy a special edition combo version , and i got switch problem
Gotta make sure that sensor wire is good and it’s fully plugged in.
@@ExocagedRC i already chck , its fully plugged in , or it cause water on sensored wire, btw the special edition motor is 3800kv , will it cause by the kv rating on the motor?
👍🏾👍🏾👍🏾
Nice video, bro! But im think u dont need backgroug music. Wanna to listen you speach, not music)
you like to hear me?
@@ExocagedRC Yes! When you tell something, it is better if there is no music in the background. So much better is the perception of information. During the test drive, you describe what is happening. For me, hearing your voice without background music is much more pleasant.
P.S.
I have been watching your channel for many years. This is one of my favorite channels. Very informative videos. With lots of technical information.
3200kv sct copperhead combo even juicier in trx4
When the trx4 blazer first came out I had a mamba x and 3800kv slate motor. Even on 3s it was more than I ever needed. After 2 stripped portal inputs, and a set of differential gears, I put a brushed setup back in it. Was fun but every other time something broke.
😁🛩️😁
It’s gonna slip
Any chance of a video without music. It's distracting and Ruins the video
I just put the hobbywing axe r2 3300 in my trx6 snapon hauler and was wondering if i could run a jst of that and run the lights with out burning anything out?
Yes u can lights are ok to run right of 3cell power lead