Refill Nespresso Vertuoline Capsules - EASY!
ฝัง
- เผยแพร่เมื่อ 29 ธ.ค. 2017
- NespressoVertuoline capsules are quick and easy to refill. Just use simple household items - no need to spend tons of cash on buying new capsules. Watch this video to find out!
- แนวปฏิบัติและการใช้ชีวิต
For everyone out there this worked absolutely perfect!! No need to use foils, no need to buy Nespresso pods, using my own coffee was identical to a Nespresso pod. Thanks for the great video!!
Philip Meme does your machine have the automatic open/close? Thank you!
The way you are talking is soothing. I bet you put your kids to sleep reading just first paragraph of story books.
They're out cold in no time flat - and they're in college!
@@wadesroadster1639 lmaooo love it and the video thanks!
I watched a multitude of videos trying to find a "hack" because I couldn't justify spending $23+ on a reusable pod. And then there were so many steps for all the videos I watched on using aluminum foil, including stacking two pods together. But this is the quickest, and simplest method. also the one that works best, thank you
Thank you for the easy demonstration! I think your tone of voice was just right! I could understand you perfectly and you held my attention. I love how you didn't even respond to the negative comments! Thanks again...
This is the best idea yet! I purchased metal refill tops that fit on the pods. They worked ok but leaked around the sides. This method works perfectly. Thank you for your fantastic idea. I will be using this method from now on.
If everyone just opened up a Vertuo capsule they'd realize that there is a plastic liner under the aluminum cover. This is a great idea since press and seal is food safe and can be heated. It is unlikely that it is leaching and plastics into your coffee, just like the plastic liner that comes in the original Vertuo capsule is not leaching plastic.
@. Ahhh, but you failed to mention home distilled water. It is less expensive than bottled water (per litre) and distilled water is 100% clean. And there is a bonus! Distilled water extracts more minerals, antioxidants and flavour from your ground coffee. Even the so call 'experts' don't know that.
@. Acid in the rain maybe, the plastic would be kinda dense to evap right?
@@return2earthvideochannel good info here. thanks lots! good day to you!
@@aileenrivera844 Don't believe whatever any bummer here in TH-cam says.
Is it made for boiling water to make coffee with?
Thank you. Thank you. Thank you. My darling husband found your site which settled the issue of possibly cutting our costs by discontinuing use of our Breville Nespresso. Because we can now cut the cost with your genius way of using our own coffee in the capsules, I can still have that dreamy crema with my favorite bagged coffee. Happy wife...happy life. :-)
If you have a Vertuo, this is a must. It took me 3 minutes to get this hack up and running and in my Vertuo. I love the capsules/pods but I like my own straight espresso as well. I like grinding espresso beans of my choice and now this. Great idea bro! 👍🏻
Didn watch the whole video but I do the same thing. Saved alot of money this way. Coffee tastes just as good. Make sure u get the good coffee grind. Cheaper ones tasted terrible. The way I do this is filled the capsule with my coffee then hand seal with foil. Just make sure the bar codes under the capsule are not covered and ur good to go.
Chillest money saving video ever. Thank you!
I used this technique with a spent Columbia pod and my normal coffee grounds. My usual grind is relatively fine compared to most drip grinds, but still a bit coarse compared to the Nespresso pods, and it seemed watery coming out, but the taste is actually pretty great on my first try. Probably not different enough to my normal drip to be worth the extra hassle, but it was a fun experiment. The real test will be using a proper fine grind and an espresso pod, but based on this test, I think it'll be fine.
And for all the folks worried about melted plastic, I inspected the used wrap, and it doesn't appear to have gotten hot enough to melt. Also, the original pod sealing material is made of some sort of plastic and foil composite, so I doubt the press-n-seal is any worse than that, but we all get to make our own choices in life. *shrug*
No problems here either. But I also used Lavazza ground espresso in a can. Tastes great, flavor is full, and great crema. Also, I wish I could post a photo so you can see how dark it is, pure espresso black. Good luck
Great explanation- loved the calm, clear presentation- thanks!
Great video! I’ve tried the foil caps and they work well but I will try this way as well. I did find the coffee blend is important and if you like intenso Nespresso I think espresso beans would be best. Your voice is great and you are articulate.....thanks for the video.
Jeez, man, you have the perfect 'Documentary Narrator's' voice. Morgan Freeman finally has COMPETITION!! LMAO
I bought a stainless steel reusable pod and it made horrible coffee. After watching this I'm going to return it and get my 23.00 dollars back. Your method absolutely makes a brew just as good as Nespresso Pods (depending on the grade of coffee you use). Thank you!!
Thanks for this video. Excellent trick and soothing voice.
You crafty bastard, I love it!!
I liked your demo!
Just what I needed! Thanks!
Wow.. PERFETTO thank you for sharing and passing the info
Great idea, great video - thanks!
Holy moly this helped!!
Works perfectly and was really quick and easy. I find the nespresso decaff options rather bitter so being able to use my favourite lavazza decaf is great. Thank you ❤❤❤❤❤
Awesome!! Thanks for this.
Are you whispering because this is some kind of secret?
Very early in the morning, the whole town is asleep. You don't want to wake up the baby, especially not before your first cup of coffee.
Very early in the morning, the whole town is asleep. You don't want to wake up the baby, especially not before your first cup of coffee.
haha - so funny
@@Resist4 why are you watching this, then? The whole idea in general is too much trouble, by definition. Anyone interested in this video is willing to go through some trouble, I think. (Also the person commenting above isn't the person who made the video.)
lol haha ya.
I did this but why did my brew come out very weak and not the proper amount? The barcode was showing. Do you fill the entire pod up? Not sure what I did wrong but it was like a half cup of weak. Please help!
I have the Vertuo Next Machine .. Will it work?
I used Foil & it got caught while spinning & NO Crema.
I think Nespresso made it where it won’t work on the new machine 🤷🏼♀️
Brilliant!! This works well.. Just need to tinker around and find the right coffee and amount to add
Yup it works. Thank you!!
It works! Thank you, it's awesome... !
Listen...this son of a gun figured this $hit out and kindly passed it on to the rest of us buggers! 🤪
i'm guessing you've found recaps on amazon since this was out, not keen on microplastics myself
This is fine. I like Nespresso coffee. I'll spend about $60.00 or more once a year on Nespresso. My way of saving is to alternate between Keurig, French Press & drip coffee.
Depends on my mood. I also used the pre-cut foil for capsules
My coffee comes out weak do you need fine ground? Maybe my grinder isn’t doing it fine enough
Great idea! I tried this last night and it worked wonderfully!!! This is by far the easiest way to refill the pods. I tried it with different coffees to see which one gave the most crema, but all were delicious!! Thanks for sharing!!
Hi Cynthia - Glad it worked for you!
Wade, for some reason, now when I try to do this trick, my machine will blink red. It worked fine the first week. What am I doing wrong? I made sure the press n seal was neatly tucked, I made sure there weren't too much coffee, etc. I hear it pierce the pod when I close it, but then it immediately starts blinking red. Hellllllllllpppp!
@Mariel Kraus no, I haven't used another pod. It's hit or miss now.
I seen the foil tops to use press and seal what a great idea
Is that any better than normal nespresso kapsules anyway?
Thanks it worked!!!
How much coffee by weight for the mug size please
tried it, works very well. just take time to do it in the first time
I have done this now a dozen times, but about 7 out of 10 times it makes a REALLY LOUD noise and the seal breaks and coffee gets all inside the machine, can you give me a tip why this might be happening?
Can I use regular plastic wrap?
I was already drinking my coffee by the time he was finished fixing the pod but I will try it.😀
Thank you for sharing this❤️
where did you get that perfect shop glass? Thanks for the video
Great video! Thank you for sharing.
Thank you! It work !!!
Great information . Thanks u so much for sharing !
Dig your Seiko, great time piece
Fantastic. Thanks
You can actually use tin foil to cover and seal the fresh coffee. The machine will still be able to read the bar code if you carefully trim off excess foil The small amount of foil you'll leave to seal it over the lip of the old capsule won't interfere with the machine's ability to "read" the bar code. This worked for me better than plastic wrap.
Not true what a joke!
@@Ftybr57 The joke is your ignorant comment. I've been using this method for more than two years and it works perfectly. But if you prefer to dwell in ignorance, be my guest. Just spare me your thoughts.
i have found using a box cutter for cutting the initial foil off works a lot better then scissors. just be sure NOT to cut yourself. i was able to shave my prep time down 5 or so mins (being conservative).
super great thank you
WOW! it works!
Thank you so much for the video!
You’re whispering because this is a secret right?, right! 😁
Isnt heated plastic carcinogenic? That press and seal material may contain carcinogenic material that is released with the heat of the machine. Or am I wrong?
Cool...very clever!!!
Does it work with the Vertuo next?
I've got the time down to right about 90 seconds per pod using the "My Cup" foil cap system. No scissors required. You can by the starter kit from Amazon for about $26. There are 4 tricks I use to make it go fast: 1) Place a rubber-band around the pod to secure it in the holder. Otherwise the pod moves around while you're trying to place the foil. 2) Just tap down the coffee using the pod holder, gently tapping it down on the counter. This also causes any loose coffee around the edge to fall inside the pod. (I rarely need to use the brush.) It levels off perfectly. No need to pat the coffee down with the back of the scoop. 3) When applying the foil cover, just press with your finger all around the very outside perimeter. You're only concerned with attaching the foil to the OUTSIDE edges of the pod, so run your finger around the HOLDER. That is key. It also prevents you from accidentally damaging the foil. Once the foil sticks, pop up the pod from the bottom of the holder and fold the foil around the lip. 4) When folding the foil, do 4 opposite sides first to hold the foil in place. Do not try to fold the foil by simply starting at one place and going around the pod. The foil can come loose. Lastly, remove the rubber-band and turn the pod over to see if the bar code is visible. Usually, there are one or two places it infringes on the bar code. Simply push the foil back with your fingernail. No need to cut the foil. It sounds like a lot of work, but it isn't. And it's far better than paying $1.10 for each pod from Nespesso. Good luck coffee lovers!
What grind coffee worked best? Does it need to be espresso grind?
Great tip did the same using tinfoil
Press and seal in UK ..???
Does anyone know where to buy either the starbucks shot cup or an alternative to hold pods in? I've tried ebay uk and amazon uk, and can't find anything without spending a fortune on a huge kit.
Any help would be most appreciated.
I use Lidl's small glass yogurt pots! I'm in the UK but I'm sure when you next go shopping anywhere, you'll find those trendy yogurts in glass pots. They also make great coffee cups!
Here's an image of a similar one. Mine don't have a rim at the top, though.
www.google.com/url?sa=i&url=https%3A%2F%2Fwww.100x100chef.com%2Fen%2Fproduct-chef%2F34-110%2Fyogurt-pot-120-ml&psig=AOvVaw3wbONF3bQiJB3BC_55j6eN&ust=1590222499382000&source=images&cd=vfe&ved=0CAIQjRxqFwoTCLjV1MuGx-kCFQAAAAAdAAAAABAF
I use a small glass. Its not crusual but anything with a neck with that size should do.
So this is what Jim Nance does when he’s not commenting on the PGA
Where did he get that perfectly sized shot glass? It looks like it was made for this task
I just started using the vertuoplus and the vertuoline pods fit perfectly in most of my shot glasses and the included espresso glasses that came with my machine. Maybe just a coincidence.
I don't have any shot glasses or espresso glasses. Where can I buy this perfect size? Is it 2 oz? 3 oz? I tested a random set of shot glasses at the local Walmart...no Bueno
@@derrickallen9035 nespresso sells them on their website
Hahaha!
So the glue on sticker is safe to eat? As it contact with coffee?
I would not take the chance. The plastic will heat a lot in the machine. No Thank you for me😦
I tried this and the machine made the most horrible noise, and got coffee grounds in my coffee. So I ordered the foil caps from Capmesso on Amazon and they work perfectly. They are also much quicker and easier to use than the Glad press and seal, so I'll be using the foil lids going forward. I also believe the foil is recyclable, while the Glad Press and Seal is not. A bit more money, but a lot of savings in time and the coffee is better.
What brand Nespresso machine is that?
Ok...what makes press and seal stick? And just becaus its bpa free and food safe doesnt mean it was meant for near boiling water to be filtered through it!
Great video,thanks for sharing!
A nice way to keep from being gouged on your pods.
Thank you
did u try aluminum foil
??
Great video. On another note, you should really look into doing ASMR
His voice was so calming
Do we gotta used espressos or any grind coffee ??
I've found that it works better with espresso grind, it also works with coarse grind but need to put a little bit more coffee in the capsule, iIt is a matter of taste and that you try different coffee grounds
You Tubers could learn from this video, it's very informative, the narration is calm and lucid, no um's no ah's, and best of all, no background music. I have a question, could the same refill be done with Nespresso Lungo capsules? Anyone tried it with Press' n Seal?
Thank you for the response. I've been known to have moments of lucidity.
Tried it. The glue in the wrap heats up on the underside of the lid and drips into the coffee rendering it completely sour tasting. Not sure how you were able to drink the resulting vial swill.
Enjoyed your video and ordered 200 new pods from Nespresso. 😂
You need to get a job in the 1950s as the chief of investigations with that gorgeous voice
no shit! Very nice!
The coffee looks really weak, I just got my machine today and I'm trying to find ways to reuse my pods.. are they strong or weak? I like strong coffee
I'm still able to make it just as strong, but I keep getting coffee grounds in my coffee. Trying to figure out a way around that.
Cordially,
Future Dwight
@@ChunkyChancho I have to put 12g or less in the capsules to keep grounds out.. but I then have to also stop the brew before its completed.. I hope that helps
Is it safe drinking coffee run through Plastic?
We the people. We are not cheap. We are environmentally cautious. Deep voice. This person should be on the radio as talk show host.
Absolutely brilliant.....................This is the kind of thinking that sent men to the moon.
Great video, and are you kidding...love your voice!!You do have a great voice...but the video is AWESOME 😎, thank you
Thank you - someone said it puts my kids to sleep!
not a bad try but I think that you are getting your coffee + some very delicious percentage of melted plastic and adhesive not worth the health risk build up, you might be better off just getting the machine from the original line that does not use a bar-code and then you can get 3rd party pods for 25 cents a piece. also just the time it took you to make this seems like a huge investment LOL ! for 1 cup of plastic coffee ...
Exactly what I thought. 100% eating plastic.
There’s people like you all over the internet who think they are better than the content creators talking down on their material. What you fail to comprehend due to your lack of foresight, intelligence, or research is that plastic film has a melting point of around 220 degrees. Coffee is brewed well under that temperature making the coffee safe to drink. If your so keen on not drinking cancer, than coffee should not even be in your diet and stick to distilled water.
hi thank you for that thought how do you order the pods from a reseller with same bar code?? i didn't understand how to get it withour bar code
The “plastic” is Bpa free and is microwave safe so yeah . Theirs plenty of other items you have in your house that are way worse .
@@RubbinRobbin the type of a smart ass to buy a Mercedes S class and run it on processed chip fat (that's "phrench phroais phat", for those who spik murica).
genius.
Sick video! Just like reloading my bullets 😂😂.
This saves cost but not time, which is the main purpose for most in getting a Nespresso machine. Will stick to the regular espresso brewing pot. less hassle
It works no matter how he talks🎉
You left out the one thing that I came to this video to find out - - how did you get the foil off the top?
keep in mind that you can pre-make a dozen of these. in a 1/3 of the time, at that.
Mark Zanetti how?
How bud?
I think he meant by actually doing 12 at once instead of 1 at a time when needed. You'll cut your time in half, easily. Kind of like an assembly line. Boom!
Its still a very watery shot tho. I'll never quite figure out what Nespresso does differently to get the higher quality of coffee out
Is it not potentially bad to brew through whatever toxins are in press n seal?
My thought too. But I’ve learn in the comments above that there is already a plastic lining inside.
Great video…I really thought you had to have a foil cover!
Although I’ve seen ppl put plastic on oven food, it’s usually also covered with foil; so, Wondering about melting the plastic? I’m all for saving money but ... time?
Yass can’t wait to do this about to try it now
How many time you can reuse the same capsule? Great idea.
Leah, you can continue to reuse it. Just wash them and don't bang them too much so they can keep their shape. Duane Reade has the press n seal on sale this week 2 for $6! It's my first time using that product - it's REALLY GOOD!!!
I agree, we still have some of the original capsules that came with the machine. Less fiddly than using the foils that stick on - they are extremely fragile.
I’m going to agree with many other similar comments and say that the cancer/negative health risks aren’t worth using the press n seal. Is there another material that you can use instead? Also, what are the pods themselves made out of? Since they are designed for single use, how many times can/should they be used before they lose their integrity and you start ingesting pod/plastic in your cup of coffee every morning? I know there is a stainless steel version of the original tiny Nespresso pod, do they not make a true safe reusable vertuo pod?
yes, there are a few reusable stainless steel vertouline capsules in the market.
at first I bought one that did not work but then I found one that really works well its worth trying out
www.amazon.com/dp/B07VNBVH1G
It’s made by the coffee seal
www.amazon.com/dp/B07VNBVH1G
what about all the chemical in this plastic getting blasted by the hot water and licking into your daily coffee?
Your tune of voice reminds me of somebody... Bob Ross, is that you? :D
Thanks for sharing. This will be a way to make just hot water.
Nice watch. Saved up from all the nespresso pods no doubt
Can the plastic be toxic when it heats up? isn't it better to use aluminium foil ?