ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
SSR 125cc pit bike, $13 CDI, coil, wire harness gets the spark back!,
ฝัง
- เผยแพร่เมื่อ 22 ก.พ. 2018
- SSR 125cc pit bike, $13 CDI, coil, wire harness, gets the spark back!, Wiring a pit bike, cycle had a cut up wire harness, has 12VDC wiring mixed in, replaced ignition with $13 eBay CDI system, plug and play replacement, came with CDI, wire harness, spark coil, engine off switch, Harvey Spooner, 2_22_2018,
![HOW TO TEST A STATOR / WHAT IS A STATOR [step by step] GY6](http://i.ytimg.com/vi/VoXYzQ61tRM/mqdefault.jpg)
![ได้ซะที! ชื่อBabyของเรา [cc] แดนแพทตี้ SS2 | EP.47 |](http://i.ytimg.com/vi/4jrGByLm-Fw/mqdefault.jpg)
Subbed… went to 10 motorcycle shops and they all said they won’t work on it. This video made everything so damn simple thanks brother
Thank you for a clear concise explanation of the CDI set-up.
Good learning from someone who breaks it down to simple terms...thx😉
HARVEY YOU’RE THE BEST! that’s the first time in a while I’ve actually shouted “hell yeah” when working on this bike. Man that was too easy! Thanks a ton for the help
Thank you my friend. Your videos are great very helpful just got one of these for 50. With no spark. Now I can fix it hopefully. And I've watched a few of your other videos. Much appreciated
Hey, I just wanted to tell you, "Thank You" for your vids, they have Helped soooo much. I'm trying to finish a Drift Trike that has been a long time waiting. Thank You Sir... Rich
I really need a garden like yours. All them ATV'$ love it and your videos are pretty much simplified that it's so easy to follow well for that I'm following you. Thanks.subscribed.
boom i have spark! thanks! very to the point video. my harness is just one of the fancier ones but the wires are the same exactly! i tried it as you showed with spark then i plugged the key on mine and it has no spark in the off position and spark in the on position. i built this scooter from the ground up so im down to a kick stand so i can get the bike off the bench, running board type foot rests along side the motor, and carry it up the stairs from the basement!
Hey Harvey Its funny that my wife said that we are so much alike ! That we would take any thing that wasn't running and get them running. The difference is that before we left ID I had my own hoard and I had to get rid of them. Unfortunately here is AZ they are all a lot of money so my wife said I am Cured of my illness ........ Funny thing is that I told her that I told her that I am not Cured but, that I am just in Remission ! LOL Just thought that you would get a kick out of it ! Take care and have a great day !
Bro u don’t understand how much this video helped me out
Hey William, I'm glad that my video helped U out, I'm always trying to keep these rigs from the scrap yard.... Thanks for getting back to me, watching, and commenting!!!
@@HarveySpooner will this set up work for a 250cc motor
@@HarveySpooner hey guy I have a 125cc 1980s pantera motorcycle straight and trail bike my cdi burnt on the muffler can I bypass it in any way or can I put a bigger cdi box on it and how big can I go
@@HarveySpooner it will turn over but won't start
@@HarveySpooner mine is a kick start, can convert it and put a key start?
First vid that told me what i wanted a simple way to get ignition
Dude! Thank you for this video!
I’ve been trying to get spark on my 1975 Kawasaki and this was the answer!
You rock
Hey man do you think this would work for my 79 Suzuki?
How about my 95 rm 125 2 stroke, got no spark will this work?
Will echo William colans comments. This is by far the most clear and helpful vid on pit bike wiring. I spent hours last night testing all my connections and trying to understand the wire configuration. Previous owner had it all hacked. I'm going to scrap it all and buy a kit like you did. Also was the only video that explained the transmission wiring. I was perplexed to see all those loose wires going nowhere. Big thank you.
So my son showed me how to comment on this...Thank you very much this was such a help...
Hey Shelly!!! I'm glad that my videos helped, I like getting as many of thee running as possible, thanks for Ur thoughts, encouragement, watching, and commenting!!!
Thanks for the help this got my 110cc Chinese pitbike back running
how about a china quad powered golf cart,lol... i see alot of the same questions being asked over and over because people are too lazy to search your videos or all the others here. i deal with those questions in a few facebook groups,and it drives me nuts........ you put alot of time into these videos to help people that you could be doing other things,hopefully some will get some knowledge from it. enjoy the rain/snow tonight ,might stop raining by monday
I think this guy is wonderful...helps me keep grandkids toys running...nobody around here works on them..lol
i just wish i came from a family with an nice peace of land to ride on :(
How much rpm does the engine need to spin for these DC cdis to spark? Or is that only affected by the strength of the trigger pulse
Very helpful I have a wiring system coming for my wpb 125 👍
Thank you for a great video! I've been struggling hard with my monkey bike, going to test this tomorrow!
Could you do a vid that s showing you installing the ignition
Great Video Harvey looks easy when you do it.
Nice to see the bike run. It was great.
u have a pretty good camera haha, surprised me when u zoomed in on the spark plug
i just did everything like u said and damn your right it was easy (I've never worked with electric anything before so I thought it would be so much harder
Nice vid, learnd so much!
There's a college professor living inside you Harvey,nice easily understandable ignition lesson.Now explain all that relativity stuff!.
Hi I've got 2 sets of wires coming out of motor. I've figured out the spark and cdi... I'm trying to wire in a gear indicator. Have you done anything like that? I cant take my stator cover off to see because I had to weld a nut on so I can drill start my motor. Thanks
Thanks from Dominican Republic, good video
thanks bub wish u were here in my backyard hands on i have 6 trikes thats calling ur name man thanks again for videos man im in sc columbia do uhave any twin broz here lol neeeeeed mechaniksssssss
Great video bro :) Thank you, it helped alot
Great show brother 👏
I just bought One of these Ignition kits but my pitbike has a key Ignition that was missing.Wherw do I plug the new key Ignition to?
How do you feel your capacitor jump start pack would do in place of the on board battery. Yes I'm aware electric start would be a no go but how do you think it would go running lights etc once the bike was running
I'm getting 0 ohms out of everything except the blue and ground wire. Do you know what might be my problem I tried a new CDI already please help
Helped a bunch, thank you!
Hey Harvey, the wires to the coil are kind off switch the two around, and see which one worls
I got a Chinese bike that I need some work done this video really help me they literally show me to go on Craigslist to look for a mechanic hope I can find one just like you cuz you know just about every damn thing got to start reading some serious research just that at least get half of what you know
Don't feel bad, I get only about 1/4 of what he knows & what I read. What sucks A$$ for me is that I'm the equivalent of the "shoemaker's daughter", except in this case I'm the (Many, Many) mechanic's daughter. I come from bloodline of mechanics in my family, and nobody will help me because either they're too tired, they're dead, they have kids and have grown out of this, or just don't want to be bothered. So when I go to work on things by myself my father comes outside and asked me what the hell I'm doing cuz he knows I know nothing. I crashed last year to the day, shattered my tib / fib (Got a plate in my leg) so my father says if I ride the bike he's going to crush it with his Kubota tractor. I'm like, WTF⁉️ MY DOCTOR GAVE ME THE CLEARANCE TO RIDE ‼️
I want to fix my bike cuz I know my carb is screwed it's spewing oil and gas and it's all coming out into the air filter. I know if this continues everything's going to get corroded and my bike will be worthless.
I have a China 90cc have you worked on any of them I'm going to be working on it soon at dizzy shop needs a new pull starter does not have a starter but it does have a kill switch on it take it easy sir
I have a pit bike I built from the frame up It is a razer frame that’s neon green I put a 125 SSR Pitbike motor but I let it for sit for too long and it would get no spark so hope this helps
Trying to put cdi on really old 2 stroke motorcycle motor there is like 7 wires but I have watch all ur videos on cdi kits bout to give it a shot thk u
This got mine back running and today it quit running again and I’ve went through everything. I think it’s the stator
What are you supposed to do with the wires for the electric star and the headlight, you must have to leave some part of the old harness in there right?
Don’t you need a receiver for a kick start or is that just electric start engines ?
We're did you order your wire harness from and what is the whole assembly called
Nice information harvey
Hey 1970chevy07!!! So many folks end up with pit bikes and hacked wiring harnesses, this should get a few of them back on the road!!!! Thanks for the kind words, encouragement, watching, and commenting!!!
Extremely cost effective start system
I need help I got a 70cc ssr pit bike an I bout a Sachs motor 125cc it got 3 yellow an 1 bule/white wire I'm trying to hook up to the cdi
You’d the GOAT OG thanks 💯
Good explanation.
Can you make a video about where the magnet should be placed ? Cause I think that’s why I’m
Not getting spark
This was a blessing 🙏
I got a quick question. My CDI is bad on my 1986 Kawasaki KDX 200. do you think I could hook up a newer CDI from the same type of bike?
Hello sir
How to connect Yamaha Rx 100 bike engine wire to CDI and to spark plug to get engine start without battery?
What exactly did you plug the portable jumper to do test the spark?
Hey I Connected all my wire harness and I have three wires that don’t have any where to go one is a red/green male ,white female ,and yellow female do you happen to know when these go?
If I put a trigger on my atc70 flywheel can I hook to my 6v stator to power the cdi for spark to delete my points and condenser
Hello Sir I have a 110 CC semi auto quad, with those gear shifting wires, do you have a tutorial on how to connect and where could I order a dash which shows the gears lights eg. 123.
Also my stator has 4 wires 2 yellow, 1 bluewhite and 1 green, no redblack wire.
Ok so I dont need a battery hooked up to start my kickstart dirtbike?
Great video! Love the commentary and detail. Got the spark back on my ssr110 pit bike in about 5 minutes after seeing this. Can’t believe how easy it was.
does it hook up to a batery and wich wires to hook up to batery
I have a 70cc chinese dirtbike da dont have a spark order a hole harness kit but cdi is 5 intend of 6 would it work
I have a pit bike that has a 110cc four stroke in it But at the moment it has a 90cc two-stroke from a quad but has all those extra wiring harness things that needs to be fixed so I’m going to buy a full new harness for the 90cc setup and the 110cc needs new piston head rings.
So I have a 2007 kandi quad it has 3 yellow wires that go to the fly wheel to the regulator and 1 blue and white to the pick up and 1 ground how do I get her to spark she has gas shocks hoping for the best
i have a 140 estart.I cant get mine to run, I have spark and fuel but it wont run, just cranks over, any ideas?
whats the link for this kit? how did you start the bike, i have no kick start or electric start button
What if you dont have a blue white wire. I have yellow green white red white black and pink
Hiya I’m in need off support off my wiring loom I haven’t got a clue we’re the wires go I have 2 green wires coming from my loom and I have to yellow wires coming from my loom also other colours and the stator magneto only has 1 off each colour 1 yellow and the same with rest
Tanks!!! Helped a lot
man i did a front tube swap today took the bike down and it worn start please please help me ive looked at everything
Harve is there a replace pluse coil for a 1988 300 2x4 suzuki. Atv thanks.
Could I bug you with this extra yellow wire ? Trying to bring a SYX 70cc 4 stroke China bike back to life for the kids. Changed the stator (6 poll I believe) the new wires coming from motor has 2 yellows ? So I am left with one extra yellow could I just slice them together? ( red,green,blue, 2x yellow ) no lites on this bike. The new wiring kit has all the extra wires for lites so I going to run my own wires but idk what to do with extra yellow ? Any advice would be appreciated. Thank you
Would this work for a 115cc Tkm go kart engine? Do these just work for any 2 stroke motor?
What is the yellow and white wire for on the engine side?
What frame it that I have the same one but I don’t know what it is
Will this work for 2 stroke I have a yt60 trizinger and the wiring harness is trashed
I have a 49cc pocket bike I need help with the wiring cause it goes hell and I need to get my spark plug resistor cap after that I need to know where all the wires go all I know is this one green wire with a circle it goes onto the pull start bolt in the top I don't know anything else cause it came all broke it's a junkyard fine btw
This is the same process for every 125cc pitbike engine right?.
Love your channel bye the way sir I have learned a lot thank you
Can you pleasw put the link down below..
Do u have to ground the coil
Hey i have a problem that when i switch gear my bike turns off
Hi i have a 2000 ktm exc, can i buy one of these kits and make my bike electric start?
Harvey,
Great video, However you said 2 seconds, but were gone for 38 seconds, I think you hooked up 25 other
things you did not show...LOL!!! It really is that simple folks, I was joking! Harvey knows that! Thanks Harvey.
GOOD TIMES!!!
Wait but how do you ground it?
i have a suzuki lt 160 cdi box fried it has 3 yellow wires and 2 others 1 is green and 1 is blue how do i get spark 2 it with your wireing harnes my 4 wheeler is a 03 thank u 4 your time
Hey David, U did not mention the year of Ur Suzuki.... I have no experience with Suzuki ignition systems, I checked an ATC125 engine that I have and the pit bike ignition does not look compatible with it.... I think U are looking at the voltage regulator, the 3 yellow wires are 3 phases of ac from the stator not sure about the other 2, green is normally ground and if the voltage regulator, that would make blue positive 12VDC for the battery... please check to see the colors of the wires coming out of the engine near the flywheel.... Maybe we can figure out something from them.... Thanks for asking, watching, and commenting!!!
I bought a brand new lifan125cc motor it has spark compression fuel just won’t start any suggestions
Harvey! Can you tell me where to purchase that kit? I need it for a 1979 DT250. Thanks!
Me and you both, did you ever solve the problem?
I want to work with you brotherman gain some of that knowledge you got
can you put a link in the commonts i cant finds this
I don't know how long it'll take you to get back with me but I have a 110cc John pagsta mini chopper I've taken a 125 pit bike motor I left the 110 CC wiring harness on the bike and I'm trying to hook up the 125 is there a diagram that you can send me for that or let me know how to hook it up I've been working on for about a week I bought a new coil a regulator and a solenoid when was hooked up to the 110 I wasn't getting any spark so if you could help me out I appreciate it thanks
Great video
I am having a horrible time hooking this cdi conversion kit up. It has three wires and they are not color coded so to speak. I need to send you the pictures and since you deal with this on a day to day basis. I know it's simple but I'm making it hard. Where could I send you some pictures of what I have thanks
hello Harvey on my boys quad kazuma 70cc auto ... it's got regulator with white n yellow wire going in to it ....but coming out it has a ,,,,black,,,,n a ,,,,,green witch one is the earth n witch is power plz n by way think u are a electrical genius love the vids stay safe n warm love from uk ✌🏻️❤️🇬🇧
My tao tao 110b has spark when u jump it from the starter but no when u jump it from the battery. Since the only other two wires u don't need go to the voltage regulator and then to the battery is that my problem. Should I just buy a new did and voltage regulator? Plz help
Will this work for a cdi 95 suzuki Rm 125 2stroke ?
Gd pm sir whats the color wirings fulser in honda sl 125.
So what would make the mother not fier
With this work for a kick start
250cc motor
From motor I have light green with red, white and red, black, yellow, yellow and red, white. Idk what the bike is I know it’s a 110cc 4up with clutch and electric start. I just want spark! Help
Ac for kickstart and dc is battery correct?