How To Replace Sideview Mirror 2006-12 Ford Fusion
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Buy Now!
New Mirror from 1AAuto.com 1aau.to/ia/1AMR...
When it comes to driving, it’s important to know what’s behind you and beside you. A broken side view mirror could put you at risk of an accident, or ticket! TRQ side view mirrors are engineered to fit your vehicle. This video shows you how to install the driver’s side mirror but the procedure will be the same on either side of your 2006-12 Ford Fusion.
• Check here for more videos on the 2006-2012 Ford Fusion: • Ford Fusion 2006-2012 ...
This process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Pocket Screwdriver
• Trim Tool Set 1aau.to/oa/1AXX...
• Complete Torx Bit Set 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Ford Fusion 2006-2012 1st Generation: • Ford Fusion 2006-2012 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
It's so rare to find a no-nonsense, no 30 minute intro and explanation, just a straight forward, well lit, good audio, easy to follow instructions. Absolutely well done.
When I tell you, you are a god send for making such a perfect video!! I am 24 yr old female and 2 auto places quoted me for $330 just to replace my driver mirror and doing my own research the mirror only cost $40 and the tool kit I got from Ross for $8.99!! I fixed it in around 45 min which went by really fast. I saved so much money just cause this video is perfection. Thank you so much!!!! If I can do it on my own, anyone can!
Thanks so much TRQ!! Just replaced my mirror assembly (found at a wrecker) with your concise instructions and it went well. Tried a few body shops first and they weren’t even interested. Please keep up the great work. So grateful.
I must said to replace side mirror you DON'T NEED TO REMOVE DOOR PANEL
Had to replace my door handle and now my mirror. Thanks for reminding me where everything is! This video is super helpful and short.
Great video! But I’m not sure why you would not talk about the sizes of the tools you used.
Thank you so much! I replaced the mirror in about 20 minutes. My idiot horse has broken it twice now by trying to stand in the carport. First time I took it to the dealership and it cost $$$. This time with your video I did it myself and the only cost was the cost of the mirror. Your video was clear, concise and showed exactly how to proceed, which bolts to remove first, etc.
Good video, I knew how to remove door panel, switches and such, But was here to see how the mirror trim section attaches to new mirror. You did not remove the white trim from the old one.
Did this is all of ten mins thanks to you 👍🏾
It's literally the best spot on video. Took @ 15 minutes, probably 7 minutes if I had my tools organized!! Ty very much
Thank you for this. I just did mine. Simple and not a damn lecture!👑🖤💪🏾
Thank you thank you thank you!! I recently broke my mirror off by hitting it on my house (since I have a very narrow driveway) while backing up and didn't have the money to get it professionally fixed plus I didn't want to pay for the overpriced amount of the labor/new mirror. This was so direct and easy to follow and helped me replace my mirror with a replacement I bought off of Ebay. You def have a new subscriber just to show my gratitude. ONLY DOWNSIDE is that i wish you would have shown the front side of the mirror when you had taken it off the door so I could see if the foam left on belonged or not, but I just guessed, and all went well.
Great camera work. Finally don't have to deal with nausea
Thank you for sharing very clear cut ....will give it a go for on the passenger side rear view mirror also do you have any videos on taking off the center console side panel the lighter slide down in there because the plastic ring that keeps in place broke
Thank you! This was a huge help! We were able to do it ourselves with the help of this video!
This was a great video. Nothing left to wonder about. Step by step instructions.
Next time you should list the size of the Torks Head Screws & what size Socket you used. Most folks usually need to know that. I always assume that people don't already own a Torx Bit Set, or a 1/4'', or a 3/8'' Socket Set...
Used this to help me and everything worked out perfectly! Great video
Thanks I’m going to try this ! What tools did you use for this job for the screws
thanks this video was very helpful!
Well that was easy and predictable. Perfect how-to, well done.
Wish you could tell us what size of sockets and Ford sizes we need to use on these videos
Thank you so much. I finish it in 10 minutes. Very easy.
Is the passenger's side pretty much identical with no extra steps? Also, where did you get your replacement?
Yes it is. I recommend buying a used mirror from a salvage yard. Google used car parts, and you’ll see a bunch of junk yards with them in stock. Wayyy cheaper. Only caveat - they usually only take phone orders and are open only during banking hours. Good luck!
I don't think I removed the door panel
was it not necessary to remove the door panel? thanks
Thanks muchly! I can do this now. (I'm no mechanic)
My original is heated- I found a color match heated but it has a puddle light. Will it still connect?
I noticed the new mirror is different. The previous mirror was painted and the new mirror a black plastic exterior. Is there a way to preserve the painted mirror housing.
Hey, I did this with the mirror from you guys but I get a blind spot system error, I got another replacement and the same issue, does it also need to be programmed or something?
What tool do I need to remove the mirror?
Thanks so much! very helpful!
What tools do I need specifically for this job?
Any idea if the heated mirrors will work if installed on the 2012 SE trim that didn't come with them originally?
Hi does anyone know what tools exactly are needed, I know the first part is a T20 wrench but what about the rest
Good video thanks just this to help my newphew. Only thing would be helpful if u said bilt size
Thank you!
Thank You
Thanks
Thanks for the vid. Does anyone know if it’s possible to swap over the colored part of the mirror housing, or would that have to be painted?
Painted bro , unless you get a factory colour
It's just a little plastic piece that has clips that hold on to the actual mirror frame itself. The same part busted off of mine and I'm getting a replacement piece from a junkyard just to snap on to it. you can paint it if you want, but they do come off.
The cover on the replacement rear view mirror is black not white like the original. I just did this repair not realizing the original would not fit on the new mirror housing. Getting one from ford or the junk yard would be best however removing the painted cover without damaging the mirror is difficult. I bought mine from Dorman there was no mention. Of the covers not fitting. Good luck. Video was good but this is an important thing to know before you replace
Those things are incredibly flimsym
What size are the bolts, screws and torx?