How To Replace Interior Door Handle 2006-12 Ford Fusion
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Buy Now!
New Interior Door Handle from 1AAuto.com 1aau.to/ia/1ADH...
Interior door handles can take a lot of abuse over the years being pulled on to open and shut doors, or banged up if you load things in and out of your vehicle frequently. In which case, you may have trouble getting in and out of the vehicle! This video shows you how to install a new interior door handle in your 2006-12 Ford Fusion.
• Check here for more videos on the 2006-2012 Ford Fusion: • Ford Fusion 2006-2012 ...
This process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Pocket Screwdriver
• 10mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Ford Fusion 2006-2012 1st Generation: • Ford Fusion 2006-2012 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Thanks so much. The mechanic was going to charge me $290.00 to replace my driver side door handle. Thanks to you and your video I was able to do it myself for less than $100.00 including the parts and tools. Next time it will cost me even less because I already have the tools. No more rolling down the window and opening the door from the outside. 😂 Keep up the good work.
No Need to roll down the window next time. You should be able to open the door from inside by: Pulling on the door handle, pull on the lock handle, push in at the back of the lock handle.
Man made the video dumb dumb proof but still under 6 minutes. Thanks bro! Saved $250!
Thank You! I'm lousy at auto repair but just followed step by step, saved a ton of money. This would be a perfect presentation if he only mentioned the tool sizes... So instead of, 'remove this bolt,' He should say, 'remove this 5/16ths bolt,' etc etc...
This is the best video I have seen and used on the internet for a very long time. The young man was articulate in his presentation. It saved me a bunch of money by following his instructions.
Thanks! I appreciate the short, focused video with good editing. You saved me some money!
+@starbuc2 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thank you! Took me less than an hour to do this. I managed to get by with just a small flat head screw driver since I didn’t have any wedge tools and a socket kit (no power tools).
Thank you! I'm a mom in my 60's and did this by myself!! Good video
Had a shop replace a door handle a few years ago and he charged more than $100. Both driver and passenger handles were broken recently and I watched this video. Perfect tutorial on how to change them. Highly recommend to check it out and buy the handles yourself.
I used your video to replace my inside door handle in 08 Ford Fusion. Great Job!! Your instruction was so confidently spoken to ensure me (a klutz) I could do it. I did and Thank you for ALL your video's.
PERFECT! Car Shop wanted $499 for this repair! Thank you!
Thank you so much for this easy to follow video. Less than an hour of our time, and the hardest part was trying to open the new ratchet set we bought.
This video is great! Easy to follow, great audio of video. Instructions are fool proof. Life Saver!
Thanks for this video. Walked me thru the whole thing.
Thanks
Rarely do you see a video that looks this easy...and it turns out that it is this easy!
Great instruction and step by step detail.
Took me about an hour and saved me a fortune! Awesome!
+Drew G Thanks for watching our video! 1aau.to/m/Shop-TRQ
Great video. Installed new handle in roughly 20 minutes. Works great.
Thank you! Very helpful. Gave me confidence I could do myself, the info to get it done easily, and probably saved me a couple hundred bucks!
Thank you for making this great video! I just fix my daughters door and saved lots of money!
Bought the part on ebay and with watching this video i made quick work of it🙏🏻 thanks guys
AWESOME video!!! :D Probably saved me 200 dollars. Cheers!
Thanks for this! Commenting to help your channel. 😉
Great video. Good, clear step by step instructions. Thank you.
Thank you very much. I followed all your instructions. Because of you I fixed my door handle! Much love to you 😍 May God bless you abundantly for these videos.✝️ LOVE Rose
Very easy to follow directions. Just needed the 9/32 to complete the job. Thank you.
Worked great, thanks for the step by step!!
Thank you so much for posting this, very professional and explanatory. Helped me a lot to get the job done! Right on!
saved me a few hundred bucks... thanks!
Thanks a million! Made this swap out so easy!😄
What’s the flap called inside the door handle I’m trying to buy some for my car 0:16
Easy peazy thanks
Why is this a common problem with this vehicle (& the 2011 Mercury Milan, which is basically the same car)?
thank you for the detailed video - super helpful
This guy is great
What size is the torx screw?
is it pretty much the same process for the rear doors?
Thanks Buddy, Good Video and Explanation...
Can anyone else not get the cap off by the door handle?
What size socket for the mounting bolt? I cant get it off
Excellent vid. Cheers!
+slappy200 Thanks for watching our video! 1aau.to/m/Shop-TRQ
Very helpful!
my friend Hutis Shingler Will Not fix his door handle. he rolls the window down and reaches for it. when it gets chilly he can't open it. he gets locked in.
I need to fix mine same side , how would I know it’s not the cable. The cable looks pretty strong. Thanks
Thanks
Watch it- Buy it- Do it- Comment- Profit
So my husband broke the inside handle in our 2011 Ford fusion. It opens from the outside but not the inside. I bought a new handle and was waiting till it was a bit warmer to fix it, as we live in a condo and don't have a garage.
Recently we had a cold snap, warnings all over the news and weather apps. It got really cold really fast as it usually does in Alberta Canada. We have been having some issues with the battery and I tried to jump start it with a battery pack booster. That little thing is powerful and has worked amazingly trying to boost a dead battery previously but this time it did not work. I wonder if that maybe messed up the battery somehow.
Anyways when I went to lock the car back up it wouldn't lock with the key fob. So I left it and when I checked the doors 10 mins later it was locked, but didn't plug it in because the extension cord was damaged. A few days later I went to go open the car so I could pop the hood and see what the battery info was to order a trickle charger for it and it won't unlock. The physical key won't even unlock it. The only way In is through the trunk, so now I have to try to get inside from the trunk and I haven't attempted that crawl yet.
I suspect there is something draining the battery and I googled what it could be and there was a few sites that mentioned the a door lock actuator. So my question is, could the handle inside being broken and opening the car door from the outside have damaged the door actuator, causing it to drain my battery and maybe shorted the fuse?
Anyone know what size bolt is the first one he removes? I can’t seem to find anything that fits it
Two questions both to do with the gloves.
1) Why?
2) Why don’t they fit?
Do you make "house" calls?🤣
Is it the same for the passenger side? How much it would be at a shop?
+s. guttmann The install for the passenger side should be the same or similar. We are unable to verify the repair cost through a shop. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ