My buddy and I just put this on. Both of us have zero experience with modding or working on cars and we got it done in about 2 hours. Pretty simple to do and SO WORTH IT
@@northwestside6644generally speaking a cold air intake wont void your elantra N’s warranty, unless the dealership directly proves that the cold air intake was the exact cause of the issue at hand.
Glad you are happy with this mod! I went with the open air SXTH element intake and their turbo inlet and it's music to my ears! I also have a blow off valve, which makes the symphony complete! Might want to consider one to make it complete. ;)
@@fusrodahing1993 yes, the turbo inlet is supposed to change the sound, but because I installed them at the same time I couldn’t tell you what the difference is.
@@fusrodahing1993 Yes, more suction sound because the engine is taking in more air due to how much wider the inlet is. Very pronounced with the open air intake.
Did mine today. Taking off the stock inlet and putting the forge one was easy for me. I used a mini wrench to remove two bolts on the oem inlet. Very little force needed.
I remember installing an Injen CAI on my old scion tc... I remember the install being a lot easier than whats involved in this car. But I am liking the end product 🙌🏼
When i put my afe intake in I watched this so thank you for the tutorial. I also had a bit more oil than you sitting in my turbo inlet, hopefully its nothing to worry about. Im certainly no mechanic so hopefully someone else can give some input. Also i wish the afe turbo inlet came with hex like the forge, instead of reusing the old hardware. I had a hell of a time getting the bolt near the coolant tube back in.
The oil residue is from the top driver side breather port where there is no catch can. There is a tube that goes directly to that intake from the valve cover. No worries its normal.
@@4drturbo85 yeah and I thought of that after your comment. It wasn’t a ton of oil, especially after 20k miles, so I’ll just stick with the single catch can. I’m just glad to understand how it got there. Much appreciated!
Cheers for making this video. I kind of forgot to do it when I did my K&N intake. All the open box intakes sound pretty much the same. Also not a fan of BOV sounds and think the loudness after intake is more then enough.
Any info on if this breaks warranty I was told when I bought my car it would but my buddy with a konna went to a different Hyundai dealer and they said it was fine
There’s a law that prevents dealerships from voiding warranties unless they can prove the modification is the cause of the problem, but some dealers don’t care and will push it and who wants to hire a lawyer, right? So it does really depend on the dealership. If you’re scared they will, you can always take it off before bringing it in for a warranty repair.
After installing the Boomba BOV on mine last week (in 114* heat of the garage here in AZ, would not recommend) I'm wondering if I really wanna deal with another impossible bolt like the 2 on the BOV. It seems like Hyundai went out of their way to but the bolts in the most ridiculous places for parts people were surely going to modify. That being said, is this unit compatible with a BOV? The tubing that goes to the stock BOV had to be removed and they gave a plug to block the port on the other end of the hose by the intake tubing.
I know right? I was thinking the same thing as I looked at the coolant line. There is plenty of room where they could have curved the hardline around the bolt, but instead it runs down right in front of it. Very annoying. The intake is compatible with a BOV. You just put a plug over the outlet on the intake where the hose normally runs to.
@@n-power-automotive ok great. thanks. I’m not sure if i wanna go that far yet. the BOV has a pretty nice ****whoosh**** to it as is. we will see. thanks for the video
I was leaning towards the SXTH element intake but the forge is kinda changing my mind. I was looking for the turbo inlet on their page but couldn’t find it. Is there a link to it ?
I liked the Takeda one most given it stays closed but I’m staying stock unless I find a shop that can give me at least a 100+ or so upgrade. At that point I’ll pay for everything needed vs buying parts here and there that could void warranty for a 2-12 performance improvement.
@@n-power-automotive i definitely hear ya on that. But I took a chance on the Takeda mid pipe exhaust and I was like WOW! It works just like stock, quite in Eco/normal. But full open valve makes more/louder, longer bangs n pops! Got mine for $430 months ago
@@johnsmith1034 No No No... this 3" non resonated mid pipe from AFE is definitely better than some res delete... that 3" pipe exhaust sounds incredible. Mean/nasty pops n longer bangs come out now in N mode. People turn heads to look all the time. I'm here in NY, so on cooler nights it sounds even better! I smile every time I hear it pop and laugh like a little school girl lol. Then eco/normal mode car is back to dead quite. I love it. TRUST ME! Just get the AFE Takeda non resonated mid pipe exhaust only. And if you want more... just add the rest of the axle back part.
Idk man, I have a VN with a res delete and my buddy has a the mid pipe, his shit sounds slightly better. Honestly not worth the $300 for the pipe. I have the RPM axle back exhaust 1 muffler and it sound mean asf
The enclosed Sxth would be the better option , anything open is just a step backwards unless your planning water/meth injection and intercooler upgrade to keep air temps low . That octane learning and the Ngrin button are the worse decision Hyundai made with these cars .
I get the idea a closed box is better for cooler air, but it’s been tested and once the car starts moving the AITs are no different between an open and closed intake. The only time it might be an issue is if you’re sitting still idling for a while, but again, once the car is moving air through the engine bay there is no advantage to a closed box.
The filter still sits way up in the engine compartment. It’s highly unlikely to ever get wet, let alone submerged, which is what it would take to cause an engine hydrolock situation.
Much props to you buddy I'm glad to see some k.h.a.r.t upgrades. Just got done building a theta 2 looking for about 500hp but I'm glad to see some elantras I'm planning on throwing a turbo on my 07 elantra soon
Oil catch can only deals with any crankcase blowby oil not the oil you had in the inlet that oil would be weeping from your turbo's compressor side oil seal. But if you have not removed that intake before it could be from before you installed the catch can. Easy way to check if you have oil leaking from your turbo compressor seal is check the pipe to the throttle body.
@@n-power-automotive Highly unlikely that your turbo has a leak , I think it would residual oil precatch can but I'm sure where those lines on the new intake come from so check that intake every once and a while for any oil .
It will be harder to octane learn if it learns at all because your sucking in hot air from your engine bay! If it’s the sound you want well i guess you have to sacrifice performance!
Can you record a video with the BOV recirculation valve unplugged (you need to cap off the intake with a 7/8 rubber chair leg cap) It'll result in a BOV sound for free essentially. It was a common mod for the 1.6t's and works for these cars too. I'd love to hear how it sounds. Might be enough to not buy a BOV. Let me know if you're confused and I can send you a video. Is a cheap simple mod that replaced the need for a BOV depending on how loud you want it
@@r3games1985 that intake air runs through an intercooler before it goes into the throttle body, so open and closed intakes have essentially zero difference in temperature. Basic stuff. 🤣
Not entirely true. There’s been testing and when the car is moving there’s no difference in air intake temperature between an open intake vs a closed box. Now, sitting still for a long time idling yeah there’ll probably be more heat soak, but probably still not enough to really feel a difference.
My buddy and I just put this on. Both of us have zero experience with modding or working on cars and we got it done in about 2 hours. Pretty simple to do and SO WORTH IT
THANK YOU THANK YOU THANK YOU! Finally someone has made a fairly detailed walkthru on this. Love the ziptie tip as well. Can't wait to get mine on :)
YOU’RE WELCOME!!!
@@n-power-automotive been rocking it for over a month now and it's PERFECT 👌🏾
@n-power-automotive is the intake affect the warranty?
@@northwestside6644generally speaking a cold air intake wont void your elantra N’s warranty, unless the dealership directly proves that the cold air intake was the exact cause of the issue at hand.
Glad you are happy with this mod! I went with the open air SXTH element intake and their turbo inlet and it's music to my ears! I also have a blow off valve, which makes the symphony complete! Might want to consider one to make it complete. ;)
Thanks! I’m actually not a big fan of how a blowoff valve sounds. This right now is perfect for me.
Does the turbo inlet itself create any noise difference?
@@fusrodahing1993 yes, the turbo inlet is supposed to change the sound, but because I installed them at the same time I couldn’t tell you what the difference is.
@@fusrodahing1993 Yes, more suction sound because the engine is taking in more air due to how much wider the inlet is. Very pronounced with the open air intake.
@@LeftenantMalachi Nicee. Maybe I'll consider getting both of them at once + a bov so I don't have to keep taking the intake off haha
Installed mine yesterday. Absolutely love the sound. Your video helped a lot especially the zip tie trick. Got red hoses/ inlet
Glad to help!
Did mine today. Taking off the stock inlet and putting the forge one was easy for me. I used a mini wrench to remove two bolts on the oem inlet. Very little force needed.
What an absolute incredible vehicle Hyundai has built. Dollar amount per performance you get is amazing! Hyundai is ready steppen up
Agreed!
I remember installing an Injen CAI on my old scion tc... I remember the install being a lot easier than whats involved in this car. But I am liking the end product 🙌🏼
quick question to anyone who owns this car! can you install the open air filters with a blowoff already installed ?
Yes, you just need to plug the tube that runs from the intake to the blow off.
@@n-power-automotive thanks brother! just orderd all my stuff
@@JO7V7VY dose the intake come with the plug ? If not where did you order the plug from ?
When i put my afe intake in I watched this so thank you for the tutorial. I also had a bit more oil than you sitting in my turbo inlet, hopefully its nothing to worry about. Im certainly no mechanic so hopefully someone else can give some input. Also i wish the afe turbo inlet came with hex like the forge, instead of reusing the old hardware. I had a hell of a time getting the bolt near the coolant tube back in.
You’re very welcome! Glad the video helped. I have heard others find oil in the inlet and they say it’s normal, so nothing to worry about.
The oil residue is from the top driver side breather port where there is no catch can. There is a tube that goes directly to that intake from the valve cover. No worries its normal.
That makes sense! Thanks!
@@n-power-automotive That is why ADDW1 also offers a dual catch can setup for these cars. I decided against it due to the price.
@@4drturbo85 yeah and I thought of that after your comment. It wasn’t a ton of oil, especially after 20k miles, so I’ll just stick with the single catch can. I’m just glad to understand how it got there. Much appreciated!
Cheers for making this video. I kind of forgot to do it when I did my K&N intake. All the open box intakes sound pretty much the same. Also not a fan of BOV sounds and think the loudness after intake is more then enough.
Thank you
Good video brother, I wanted to buy Forge intake but you beat me to it now I have to figure out something else 😉 it sound great love it 💪😃
Thanks man! 👍🏻 No reason you can’t get a Forge, too 😂
@@n-power-automotive haha I’ll think about it 😉 I wish I had 3.50 a gal of shell vpower not freaking almost 5$ 😉
@@PolishBullitt Kroger Fuel Points my man 🤣🤣🤣
@@n-power-automotive haha 😆
I have the SXTH open air intake and turbo inlet and it's VERY good., sounds amazing especially with the boomba BOV.
Improper oil usage can cause oil residue to end up in the turbo . Or so I was told by a Hyundai employee..
Cool car. Love all the things hyundai did with it down to the engine cover.
can you link the inlet please, the only one I see it says its only for Veloster N and i30N. or are they all compatible??
Oxman did a dyno of his SXTH Element CPTL intake and their TIP and it gained 7whp, so atleast w/ the SXTH TIP it gained power👍👍
Good to know. Hopefully my track results will improve.
@n-power-automotive wait...you ran a 13.1 then a 12.9 IIRC, your not complaining, right😋
@@klasseact6663 no not complaining at all lol. I’m just curious to see if it improves my times at all.
Any info on if this breaks warranty I was told when I bought my car it would but my buddy with a konna went to a different Hyundai dealer and they said it was fine
There’s a law that prevents dealerships from voiding warranties unless they can prove the modification is the cause of the problem, but some dealers don’t care and will push it and who wants to hire a lawyer, right? So it does really depend on the dealership. If you’re scared they will, you can always take it off before bringing it in for a warranty repair.
I'm looking to get a Kona N and noticed the octane learning thing comes up quite often. What exactly is that?
@@KevinBoulevard search my videos. I have a video specific to Octane Learning on my channel.
also what are your thoughts on the SXTH open box? you commented on the closed box, but what about the open?
I personally don’t like the look and tiny filter SXTH puts on their open intake. I’m sure it performs similarly though.
After adding this, should we have the car tuned to accommodate the added air flow?
You can but it’s not required.
Which Oil separator do you have? They list 2 as fitting on add w1 and 1 is twice the price
I have the V3. The V3.3 is a 3 port that also taps into the intake but I’ve heard it’s overkill.
@n-power-automotive Awesome thank you for the quick reply! Also any issues with the seals or boost leak?
@n-power-automotive I'm looking at adding the Forge intake, BOV and ADD W1 can to my Kona N.
@@Jake-zl8xc no issues at all with boost leaks. It works good.
After installing the Boomba BOV on mine last week (in 114* heat of the garage here in AZ, would not recommend) I'm wondering if I really wanna deal with another impossible bolt like the 2 on the BOV. It seems like Hyundai went out of their way to but the bolts in the most ridiculous places for parts people were surely going to modify. That being said, is this unit compatible with a BOV? The tubing that goes to the stock BOV had to be removed and they gave a plug to block the port on the other end of the hose by the intake tubing.
I know right? I was thinking the same thing as I looked at the coolant line. There is plenty of room where they could have curved the hardline around the bolt, but instead it runs down right in front of it. Very annoying. The intake is compatible with a BOV. You just put a plug over the outlet on the intake where the hose normally runs to.
@@n-power-automotive ok great. thanks. I’m not sure if i wanna go that far yet. the BOV has a pretty nice ****whoosh**** to it as is. we will see. thanks for the video
How much nm you use for the three bolts from the socket?
I didn’t use a torque wrench. I just tightened it up without going crazy on it.
Is it a wash and reuseable tip for the Forge? I might look into buying one in the future.
Yes the filter is reusable and just needs to be cleaned, rinsed with water and some sort of penetrating oil applied.
@@n-power-automotive ty 😊
any help on the wiring harness bolt? or is this only on the VN
There’s no bolt on the EN. All there is is just a very small clip that comes right off with almost no effort.
I was leaning towards the SXTH element intake but the forge is kinda changing my mind. I was looking for the turbo inlet on their page but couldn’t find it. Is there a link to it ?
It’s shown as an option on this page:
www.forgemotorsport.com/Induction_Kit_for_Hyundai_i30N_Kona_N_Veloster_N_and_Elantra_N--product--1803.html
Thanks ! Will probably have to go with the forge, this video helped a lot thank you.
@@CastroEN glad to help!
I liked the Takeda one most given it stays closed but I’m staying stock unless I find a shop that can give me at least a 100+ or so upgrade. At that point I’ll pay for everything needed vs buying parts here and there that could void warranty for a 2-12 performance improvement.
Where do you live that premium is $3.35? It's around $4.35 here in Milwaukee
Kroger Fuel Points. Took $0.50 off a gallon.
It’s 3.60 ish in Oklahoma
looking to get one ASAP. forge sells 2 hyundai inlets. which one is it? please help
www.forgemotorsport.com/Hyundai_i30N_Mk3_PFLVeloster_N_Turbo_Inlet_Adaptor--product--1940.html
Could I do a stage 1.5 tune with cold air intake, turbo inlet and catless Downpipe ?
Yes, but you’ll need plugs too. And possibly a HPFP.
The Takeda non resonated mid pipe exhaust system sounds incredible! 3X better in N mode! Trust me
I’m sure it sounds good. I just love the stock exhaust so much though I can’t imagine changing it.
@@n-power-automotive i definitely hear ya on that. But I took a chance on the Takeda mid pipe exhaust and I was like WOW! It works just like stock, quite in Eco/normal. But full open valve makes more/louder, longer bangs n pops! Got mine for $430 months ago
@@MrAdams-zg6gvwhy not a res delete? >$100?
@@johnsmith1034 No No No... this 3" non resonated mid pipe from AFE is definitely better than some res delete... that 3" pipe exhaust sounds incredible. Mean/nasty pops n longer bangs come out now in N mode. People turn heads to look all the time. I'm here in NY, so on cooler nights it sounds even better! I smile every time I hear it pop and laugh like a little school girl lol. Then eco/normal mode car is back to dead quite. I love it. TRUST ME! Just get the AFE Takeda non resonated mid pipe exhaust only. And if you want more... just add the rest of the axle back part.
Idk man, I have a VN with a res delete and my buddy has a the mid pipe, his shit sounds slightly better. Honestly not worth the $300 for the pipe. I have the RPM axle back exhaust 1 muffler and it sound mean asf
Where are the hood struts? This sounds great and you sold me on forge.
The Elantra N doesn’t come with hood struts.
Ali Express has the hood struts as well as trunk struts✌️
un compatriote :o i20N ou i30N ?
What is that little curved piece that looks like a microphone in the intake pipe🤔
Breather for the Veloster N. Not needed on the Elantra N.
@@n-power-automotive thank you!
Are you getting a tune?
The enclosed Sxth would be the better option , anything open is just a step backwards unless your planning water/meth injection and intercooler upgrade to keep air temps low .
That octane learning and the Ngrin button are the worse decision Hyundai made with these cars .
I get the idea a closed box is better for cooler air, but it’s been tested and once the car starts moving the AITs are no different between an open and closed intake. The only time it might be an issue is if you’re sitting still idling for a while, but again, once the car is moving air through the engine bay there is no advantage to a closed box.
How long did it take start to finish you think?
2.5 hrs. An hour of it was just looking for the nut I lost lol.
18:28 do you have a bov?
Nope, stock recirculating valve.
@@n-power-automotive sounds sick, love it when you reply to my comments btw :) i might not always reply but i always see them and appreciate them
Love the intake and i’d love one as well, just worried about about rain/snow ik my area :/
The filter still sits way up in the engine compartment. It’s highly unlikely to ever get wet, let alone submerged, which is what it would take to cause an engine hydrolock situation.
I'm sold on the intake
Does that make it pop louder ?
No. I think the pops just sounded louder to me because it’s been a while since I drove with the window down lol.
Such a cute little turbo
🤣
Much props to you buddy I'm glad to see some k.h.a.r.t upgrades. Just got done building a theta 2 looking for about 500hp but I'm glad to see some elantras I'm planning on throwing a turbo on my 07 elantra soon
@@jesseb3758 I might regret asking lol, but what does k.h.a.r.t. stand for?
@@n-power-automotive kia Hyundai automotive racing team
@@jesseb3758 ohhhh ok lol
Is your exhaust still stock? Or res delete?
Stock
Do you know how much it weighs because I want to ship it?
I don’t
A little bit of oil is normal in the inlet
Good to know!
What turbo inlet did you get?
Forge
Oil catch can only deals with any crankcase blowby oil not the oil you had in the inlet that oil would be weeping from your turbo's compressor side oil seal.
But if you have not removed that intake before it could be from before you installed the catch can.
Easy way to check if you have oil leaking from your turbo compressor seal is check the pipe to the throttle body.
Good info. I’ll check the throttle body out ASAP.
@@n-power-automotive Highly unlikely that your turbo has a leak , I think it would residual oil precatch can but I'm sure where those lines on the new intake come from so check that intake every once and a while for any oil .
No his seals are fine!! It's the top valve cover breather hose that attaches directly to his intake. That is what's causing the oil in the intake
It will be harder to octane learn if it learns at all because your sucking in hot air from your engine bay!
If it’s the sound you want well i guess you have to sacrifice performance!
The intake has nothing to do with octane learning.
Can you record a video with the BOV recirculation valve unplugged (you need to cap off the intake with a 7/8 rubber chair leg cap)
It'll result in a BOV sound for free essentially. It was a common mod for the 1.6t's and works for these cars too. I'd love to hear how it sounds. Might be enough to not buy a BOV.
Let me know if you're confused and I can send you a video. Is a cheap simple mod that replaced the need for a BOV depending on how loud you want it
to octane learn you need to be in 8th gear
Yep
"You can hear the sucking in......" you mean you can hear the induction noise
Shouldn’t really rest your hand on the shifter it’s a dct lol 😬
Not sure what this means
You're sucking in hot air from the engine bay. If anything you're losing HP. But this is basic stuff.
@@r3games1985 that intake air runs through an intercooler before it goes into the throttle body, so open and closed intakes have essentially zero difference in temperature. Basic stuff. 🤣
That hot air intake reduces power.
Not entirely true. There’s been testing and when the car is moving there’s no difference in air intake temperature between an open intake vs a closed box. Now, sitting still for a long time idling yeah there’ll probably be more heat soak, but probably still not enough to really feel a difference.
@n-power-automotive not only that you're still intercooled so that will reduce temps anyway
YOUR SUCKING HOT AIR FROM THE ENGINE IN NOW AND THE FACTORY INTAKE ACTUALLY GETS COLD AIR FROM UNDER THE CAR,YOU PROBABLY LOST A FEW HP.
Watch my other more recent video and you’ll see why that’s not really true.