2023+ Ford SuperDuty Digital Screen walk through

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ธ.ค. 2024

ความคิดเห็น • 28

  • @FlatPlaneCranky
    @FlatPlaneCranky หลายเดือนก่อน

    Crazy that ford doesn’t put oil pressure number under the oil pressure gage. When towing or idling that is one of the three most important numbers. The other two truck manufacturers do it.

    • @JasonGillett
      @JasonGillett  หลายเดือนก่อน

      I know what you mean!

  • @DennisGolden-t9c
    @DennisGolden-t9c ปีที่แล้ว +1

    Nice shot of the dash. What buttons were you pushing? How do you get a screen shot to stay when you see it? That was a bit of a fast review.

    • @JasonGillett
      @JasonGillett  ปีที่แล้ว

      Sorry for the speed, I will do a longer one soon. Pushing the buttons on the right hand side of the horn

    • @DennisGolden-t9c
      @DennisGolden-t9c ปีที่แล้ว

      Thanks!
      Do you know…What is the leaf looking icon just below the 0 on the speed indicator and just to the left of the mileage indicator bottom right corner. We are baffled. Not shown in this vid but appears on our dashboard

    • @DennisGolden-t9c
      @DennisGolden-t9c ปีที่แล้ว

      Never mind. The orange leaf is when you are driving in the Eco Drive Mode. Turns the speedometer and RPM gauge green too. Thanks!

    • @codyallday
      @codyallday 8 หลายเดือนก่อน

      I’m not getting most of these options. Just gauge and vehicle maintenance.

  • @ChrisJohnson-ld2de
    @ChrisJohnson-ld2de 4 หลายเดือนก่อน

    Why is the electronic dash in your video a different layout than the thumbnail for the video? In the thumbnail it has a different tach and information layout on the left side. What year is that?

    • @JasonGillett
      @JasonGillett  4 หลายเดือนก่อน

      It's on a different mode.

  • @Bluzharp2
    @Bluzharp2 ปีที่แล้ว +12

    I absolutely hate the dash on my new superduty. The dash does not stay the way I set it up. The seat belt information is useless and I don't need to have turn it off every time I get in the truck. Just stunningly stupid that the dash has to be changed every time. Very annoying.

    • @JasonGillett
      @JasonGillett  ปีที่แล้ว +1

      Sorry to hear you don’t like it

    • @cook06vegas
      @cook06vegas ปีที่แล้ว +1

      Get a forscan adapter and the software, not only can you change that, so I've been told but all kinds of other things.

    • @braddicke
      @braddicke ปีที่แล้ว +4

      Agreed! Just got a 2023 and hate that I have to select the screen I want every single time I get in the truck or hang up the phone. There has to be a way to set a default.

    • @nickcountycomm
      @nickcountycomm ปีที่แล้ว +1

      Same here is not good that it won’t stick when you set it up.

    • @nickcountycomm
      @nickcountycomm ปีที่แล้ว

      Pretty lame

  • @DennisGolden-t9c
    @DennisGolden-t9c 8 หลายเดือนก่อน

    I have a 2023 350 superduty. The “my view” would not stay as I set it. Had to set it up each time after turning off the engine.
    I took the truck to three different Ford dealerships in two different states showing them the issue. Upon returning to my local dealer for a Sync recall I complained about this dash issue. They wanted me to call Ford Motor company to explain my issue. After three hours and 7 different people at FMC NOBODY could understand the re set issue. Took it back to local Ford dealership. They finally got into the trucks computer and did a reset…. It works now!!!!! Ford knows of this issue. You have to stay on your dealership and they CAN fix the issue. It’s not a SYNC PROBLEM it’s a dash computer problem.
    Hope this helps Ya’all.

    • @JasonGillett
      @JasonGillett  8 หลายเดือนก่อน

      Thanks a lot for the information that is really good to know

    • @SteveDodson-l8n
      @SteveDodson-l8n 3 หลายเดือนก่อน

      why would your dealer want (make) YOU call FMC - they should be doing that!

    • @DennisGolden-t9c
      @DennisGolden-t9c 3 หลายเดือนก่อน

      @@SteveDodson-l8n when they tried on their computer to read my system they found no issues. They could see what my issue was but couldn’t fix it with their current software. After getting a claim issued FMC figured out the issue and allowed softwares to communicate.
      Way over my head but the got it to work.

  • @meatandmetal7764
    @meatandmetal7764 ปีที่แล้ว +5

    Sucks, miss my 22 gauges.

  • @donweaver5493
    @donweaver5493 ปีที่แล้ว +3

    This instrument cluster SUCKS?!?!?

    • @JasonGillett
      @JasonGillett  ปีที่แล้ว +1

      I mean, I like it but each to their own

  • @FlyingCircusAct
    @FlyingCircusAct 11 หลายเดือนก่อน +1

    Lame. They need to make color choice an option, come on man!

    • @JasonGillett
      @JasonGillett  9 หลายเดือนก่อน

      Agreed! Thank you for your comment. If you really want to make my day click Subscribe as well :)

    • @FlyingCircusAct
      @FlyingCircusAct 9 หลายเดือนก่อน +1

      @@JasonGillett Ok, I will.