Our parts are designed and tested with OEM firearms, so we can't guarantee that they will work with aftermarket parts or clones. This part *should* work with it, but your mileage may vary.
The extended mag release buttons will fit in the Wilson Combat grip modules. I have 3 XLs and I did it to all of them with the WC grips and mag buttons from Armory Craft.
We might do that in the future, but since they're intended for use in the factory setup, most of our customers are swapping it into a full factory build.
24.99 for the sig magazine release……then 29.99 for your extended magazine piece if you are installing on another grip module. I think you should include the spring and extra piece for that price. There’s zero value for a builder, you’re better off just buying the standard kit from sig.
@@tyrantcnccan you link which clip we need to get? I have a XMacro grip and need to order. I assumed you would have included one in the packaging, don’t want to order the wrong one
Would you guys be able to make a larger or more extended maybe gas petal textures safety? To give it a 1911 safety feel? The Sig one is so tiny and thin during Adrenalin dump it can be easily missed.
It shouldn't, in our tests and talks with customers, it hasn't affected the fit at all. Both parts are tapered in such a way that they reduce the risk of a snag.
This is so irritating. Every video I watch, the piece just pops out easy. On my P365X it wont budge at all. -Paperclips just bend -The tiniest thinnest screw driver just rips apart the plastic. - Alan Keys rip up the plastic WHY ON EARTH was this tiny part made of cheap plastic? It's a $600+ gun.
This method of installation is only good if you don't have a paperclip. You will see a small hole one the back of the part that will decompress the plastic tab inside the release making it just slide out with our marring your parts.
I’m not saying this guy did it wrong, but I did exactly what he said and destroyed that little piece. Plastic just tore apart trying to pry it out. A better way is to get the flattest screwdriver and push down and in as far as you can til you hear or feel a pop. Mag release will just fall right out. I was able to do that with what little plastic I had left after watching another video. It’s not a prying piece. It’s definitely a pushing piece. Look at the factory part to get a better understanding before trying to remove or risk destroying your factory piece and having to order another one like me.🤦🏾♂️
We're not trying to really show it off or compare, just help people who already bought it to get it installed. Are you having installation issues? I'd be happy to help!
Wow, this is how you sell this particular product? First off, this particular method is horrible as it only helped butcher the shit out of the small clip you say to use a screwdriver on Second, even after mentioning your method which didnt end up working and butchering the piece, you dont even include a fresh new one with your extended mag release This experience alone is making me second guess buying anything Tyrant CNC branded...and returning the three products I purchased for my 365
Please show a closeup of the firearm with the upgraded part installed. The table shot and the full view shot at then are both too far away.
Can it be installed in a Wilson Combat grip module?
Our parts are designed and tested with OEM firearms, so we can't guarantee that they will work with aftermarket parts or clones. This part *should* work with it, but your mileage may vary.
The extended mag release buttons will fit in the Wilson Combat grip modules. I have 3 XLs and I did it to all of them with the WC grips and mag buttons from Armory Craft.
Would be nice to include the hardware. Seeing as alot of people are building. I have to buy a sig release just for the hardware.
We might do that in the future, but since they're intended for use in the factory setup, most of our customers are swapping it into a full factory build.
Burned your entire budget on that Gucci grip module did ya? 😂
24.99 for the sig magazine release……then 29.99 for your extended magazine piece if you are installing on another grip module. I think you should include the spring and extra piece for that price. There’s zero value for a builder, you’re better off just buying the standard kit from sig.
Need beauty shots at the end. Want to see what it looks like on the gun. Detailed shots on the website would be great too. TY
We'll work it in for future videos!
my x-macro does not have the small clip piece...so will this still work for my x-macro?
it'll work, but you'll need that clip to use the OEM or our release. You should be able to get one from Sig.
It’s a pain the mag release detent clip isn’t included. WTF.
@@tyrantcnccan you link which clip we need to get? I have a XMacro grip and need to order. I assumed you would have included one in the packaging, don’t want to order the wrong one
Just ordered one from optics planet thanks
IS THIS AMBI COMPATABLE? ASKING FOR LEFTYS. THANKS
You can put it in with the control surface on the other side!
Pried out the little cap with the flat head and it broke…. No replacement in the bag do you carry replacements?
Sadly we do not make replacements for the mag release clip. Sig should have them available from the small parts ordering section of their site.
Would you guys be able to make a larger or more extended maybe gas petal textures safety? To give it a 1911 safety feel? The Sig one is so tiny and thin during Adrenalin dump it can be easily missed.
Pretty good idea! I'll put it on the docket.
@@tyrantcnc thank you I appreciate it, I’ll even test it out and review if you like!
Does the extended mag release or takedown lever affect holster fit in any way?
It shouldn't, in our tests and talks with customers, it hasn't affected the fit at all. Both parts are tapered in such a way that they reduce the risk of a snag.
This is so irritating.
Every video I watch, the piece just pops out easy.
On my P365X it wont budge at all.
-Paperclips just bend
-The tiniest thinnest screw driver just rips apart the plastic.
- Alan Keys rip up the plastic
WHY ON EARTH was this tiny part made of cheap plastic? It's a $600+ gun.
This method of installation is only good if you don't have a paperclip. You will see a small hole one the back of the part that will decompress the plastic tab inside the release making it just slide out with our marring your parts.
I can’t believe you guys didn’t even make the whole mag release what a joke
I was thinking this also. Why not make the matching piece. Gold and black little piece.
Will this work in the x macro
yessir
I’m not saying this guy did it wrong, but I did exactly what he said and destroyed that little piece. Plastic just tore apart trying to pry it out. A better way is to get the flattest screwdriver and push down and in as far as you can til you hear or feel a pop. Mag release will just fall right out. I was able to do that with what little plastic I had left after watching another video. It’s not a prying piece. It’s definitely a pushing piece. Look at the factory part to get a better understanding before trying to remove or risk destroying your factory piece and having to order another one like me.🤦🏾♂️
Yeah bad video, You only need a paperclip to install this part.
Not a single close up or comparison.
We're not trying to really show it off or compare, just help people who already bought it to get it installed. Are you having installation issues? I'd be happy to help!
Wow, this is how you sell this particular product?
First off, this particular method is horrible as it only helped butcher the shit out of the small clip you say to use a screwdriver on
Second, even after mentioning your method which didnt end up working and butchering the piece, you dont even include a fresh new one with your extended mag release
This experience alone is making me second guess buying anything Tyrant CNC branded...and returning the three products I purchased for my 365
Really disappointed when I got his and reloaded I have to buy and entire sig assembly to use it. Defeated the entire purpose. 👎🏼
Can I ask what you mean?