In my country, there are not many books and video tutorials about this software. I have been following you and look forward to even better videos from you. thank you very much!
I love it bro . Have being drawn for over twelve years but I always just lazily pass a few principles but am here in a America 🇺🇸 and about to go in the architectural field so I used your videos to educate myself. Thanks a lot
Mate Thank you! Studied architecture years ago, diverged into product development. Suddenly looking to make plans for renovating a house. Never worked with autocad before (just archicad / revit / nemetschek) but your video series taught me all I need to know to get going! Love your accent btw 😊
At the end of this series subscribers and viewers should be able to design their home! You won't get as detailed as this in the classroom. Keep it up bro!!
My quest is to draw fully detailed and to scale my own current home which is a 2 story house in Scotland - measuring it has been a fun challenge..... Your videos and presentation are excellent and very helpful thank you please keep the good stuff coming.
Seasons Greeting, hope to get a tutorial on column detailing and beam detailing and foundation detailing very soon, looking forward to your videos on such topics. Thanks again and keep up the sharing of your drafting skills to the world! God bless, be safe!
Please can you make a video in two to three days on this "Design 3D model of a building with 2 floors including at least one bedroom, One kitchen and one washroom on each floor"?
Thanks man. Very good videos and explanations. These videos helped me get a job. So if you are ever in Kaiserslautern, Germany you have a beer or what ever you want 😀😀
Hello Edward, Thank you for another helpful vid. I was exploring adding frames for elevation purpose, like projections or grooves, etc. Have you made any video for that? If so, could you please share me its link? Thank you once again! 😊
Thank you for your Autocad Architecture 2021 tutorials. How do I get access to series of the one-bedroom tutorials? I would like to view all of them in the series. Thanks
First of all, thank you for taking the time to create these videos, you're talented at keeping the lessons easy to follow. I do need help in figuring something out, hoping you or a fellow subscriber can help. When I create a section in a Views drawing, the foundation and main floor are 4" apart from each other. If I create the section in the main floor or foundation Constructs drawing, they draw correctly. I'm missing something and can't figure it out. Can anyone offer some suggestions on a setting I might be missing?
🤔 I'm not sure. I'm wondering if one of your Construct has two levels checked. Also check to make sure all Wall elevations are 0. Then make sure you Levels are good.
Grateful for your videos … they are one of a kind… when I create a views especially with all the constructs in 3d … the foundation and ground floor are apart … please any help…
Hope you get this message sir. I'm actually new here and I have been following you. I tried to open my 3D view according to the steps you used...but my foundation and my ground floor plan are separated. Yours are joined together, sir can you plz help me when I went wrong?
You're welcome! That is a really good question. I've never done that before so I'm not sure if its possible, but I will certainly look into it. If anyone knows how to, feel free to share with us. Respect!
How would you process in a different project phase, such as schematic design? With autocad, would use SSM and layout as sheets, ready to print the full package. Thanks!
I have a poject with 3 leles, fondation, groundfloor and level 1.I have created a 3d vieuw but the level ! dont appear in this vieuw even I have selected to add it. What to do?
Good day. When I try to select a category, all I see is the views folder, no categories listed, using Autocad 2025, never had this issue b4; can you help pls?
I have a question. When I am placing the elevation Callout Markers for the elevations; in the dropdown menu for the scale I do not see an option for the 1/4" scale? I only have options for 1:1 all the way up to 1:5000. I am sure there is a variable somewhere that I need to change so I can see the correct scale but I am not sure what that variable is or where I can find it. Any help would be greatly appreciated. I took a screenshot but I'm not sure how to attach it here. BTW I have been enjoying watching your videos and have followed every single step up to this point in the video series. Thank You so much!!
Thanks for watching my videos man. Are you using metric or standard? Metric will be 1:100 etc... while standard will be in fractions, such as 1/4":1'-0" etc...
@@TDVision_U Yes everything is drawn in Imperial/Architectural/Standard units. It is only in the dialog box when I am trying to place the elevation markers for the elevation views (the step you are doing in minute 11:14 of your video) I do not have an option for architectural scales I only have options for engineering scales?
@@TDVision_U I figured it out. Even though the drawing was set to architectural there was a user profile that was active that was set to the wrong settings which was causing the problem.
@@Rocky101 i'm having the same issue but i'm not sure what user profile you're talking about, I check current profiles and it says US Imperial, where else am I supposed to look for user profile? Thanks in advance for your help.
Respect bro, I appreciate your videos! I have a question but it's not fully related to this particular video. Each time I try to open another tab (let's say a different view), it opens up in a new Autocad window instead of the same window I am working on. I searched online for solutions and I saw somewhere that I have to make dwg launcher my default launcher of which I did and it works for the moment, but each time I close Autocad and come back again, it goes back to the same issue of opening the tabs in different windows and that doesn't allow me to access my files at once. Any Idea what I can do?
🤔 It doesn't sound like a AutoCAD problem. It sounds more like a windows problem. I honestly never had that issue so I'm not sure how to fix it. But I think you need to figure out a way to make AutoCAD your default DWG app, permanently. Sounds like you only got it to work temporarily. I hope you get it fixed man. Thanks.
Happy new year ED. I was following the tutorials from the beginning. all has been good until this one. I can't get to create views from the folders. I get a pop-up message saying: could not reference the file. What could be the reason for this?
Hey Edward thanks for creating these amazing helpful videos With regards to this video When I try to generate views , it says that my constructs can’t be referenced Could you please help me with that
Did you name both files with the same name? For example, if your construct file was named "Floor Plan", then you create a view called "Floor Plan", there will be a conflict. I think that might be the issue. You may have to create a fresh new construct and copy the old content into it. Then create a new view, brining in the new construct. Then delete the old ones, as they may become corrupt. Let me know if that helped.
Hey Man...Thanks for an awesome series of videos....much love from South Africa. I have been following along on my software, but seem to have done something wrong. When I set up my views I cant find my furniture drawing to add??? Its there in constructs with the foundation and main house but cant find it when doing the views. Can you help me ?
thanks again for the video. are you going to teach the styles and display system in ACA? that is really the "bad" thing that thraw away peple to Revit :)
You're welcome man! You shooting some really good questions. I like it. I myself need some more teaching on styles and display systems but I will teach everything I know on this channel. I am also using Revit, to some extent, and from what I see, I think Revit is more powerful. I think people are seeing that and that's why they make the switch.
Hi, many thanks for your channel and your teaching! I've a problem within the creation of the second detail. It doesn't work when I click to define the insertion point (like at 22:35) : the software doesn't running as usual and It tell me in the command line that "The creation operation hasn't any result". I tried several ways to see if It works with (reboot the software, put a short(er) name for the detail, use a different detail frame, detail another junction,...) but It doesn't work... Do you have an idea of how to solve that?
I'm not sure what's wrong in your situation. If you follow the video step by step, it should work just fine. I've never had your experience man. I hope it eventually works. I wish I could be of more help with this.
Hello Edward, I have a problem, when I do the elevation routine, and open my elevation file, the annotations appear in a scale of 1:100000 when I put 1:100 in the place callout box, I hope you can help me, regards
im having a problem with my scale and annotation once i setting up my units to meters the annotations appear larger than my drawing and also in my 3d view there are exclamation point says that the walls are overlapping can you help me please
Technical Drawing, Building Construction, Physics, Mathematics, Information Technology. But you will also need English. Visual Arts will be a plus if you can have it. Start doing subjects from grade 10.
Hey thenk you for this video i have an error message saying; "we can't found the tools in this work space" when i try to mack an elevation. Do you kown what i can do?
I feel like my autocad is corrupt or something (cracked). A lot of stuff you're doing doesn't work for me. I've been having issues with the details view for a while now and it should work just as how you're showing it. I do the call out, I select a place, I input the information, I click on where to place it. It 'cuts' but never shows up in the project navigator under details *sigh* Sheet pages don't update on the drawing titles, section cuts don't update on the pages I put them on, etc.
I'm happy to know that my videos helped you! Unfortunately I don't speak Spanish. I wish I did though. I'm not sure how I would get my videos translated.
@@TDVision_U Thank you, Again Congratulations on the Teaching in the Tutorial Videos, If You Did a More Explanatory Tutorial About the MsProject ... Eternally Grateful ... Kind regards from Peru .. !!
Hi Question, when i go to my "place callout" scale it starts at 1'0"=1'0". It does not give me the option to choose 1/4"=1'0". Any ideas how to see this?
Hi Edward. I have a project: survey a four storey building (surveyed with laser scanner). I followed your directions at your videos and draw all the four floor plans. When I created the 3D view of the building... the storeys do not connect each other..... they are aligned vertically, but they have a vertical distance to each other!!! I have checked the levels that I used to draw the floor plans and they are OK. Do you have any idea of what may gone wrong?? Any help is appreciated!
Also I changed the units from milimeters to meters and I was asked if I want to rescale the dwg and I said Yes. Right after 4 exclamation marks appear on the screen....... but still the floor plans have vertical distance to each other...... Any clue of what I have done wrong???
Can someone Please explain how I can make my 4ft "Foundation" show underneath my "Ground Floor" instead of level with the house while I'm creating a 3D View. Thanks
I opened the floor plan from the views I created to enable me to draw the views and sections and it opened as a block without doors. What should I do to make it a floor plan like the one under construct floor plan with doors and fixtures to enable me to draw the views and section?
Lol. Man I know how you feel. And I feel like I am moving slow in the videos too. I have a 9 to 5 and a lot of other things trying to balance. I want to make it more frequent tho.
That could be 2 things. Your level is not setup properly, or your drawings do not line up along the Z axis. Make sure all three drawings line up at a common point. Not sure if that helps.
@@TDVision_U hi. i have a similar problem. i have a 3 storey house. basement ground floor and first floor. levels are correct in the constructs. but when i created the floor plan there is a 700mm gap between the basement and the ground floor. everything else ok. any ideas? many thanks and keep up the good work. 10 out of 10
Hello, good day, because when I execute the detail call, only a straight line appears and not the specific Detail of the section ... why is it ... thanks, greetings
@@TDVision_U I tried that too but still wasn't visible. Could it be the type of AutoCAD I am using I am using Autodesk AutoCAD 2019 and in the tutorial you were using AutoCAD Architecture 2023. Please help
![Where to find [free] high quality AutoCAD Blocks?](http://i.ytimg.com/vi/0rVrYq-vItg/mqdefault.jpg)
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
Wish I'd have a teacher like you back in high school, I've learned way more here than I did back then, thank you. I look forward to more videos.
In my country, there are not many books and video tutorials about this software. I have been following you and look forward to even better videos from you. thank you very much!
BIG UP yourself - respect. Keep it coming
I love it bro . Have being drawn for over twelve years but I always just lazily pass a few principles but am here in a America 🇺🇸 and about to go in the architectural field so I used your videos to educate myself. Thanks a lot
YOU ARE THE BEST, THANK YOU SO MUCH FOR ALL THESE VIDEOS!
You are the greatest teacher.
done sharing
I am so excited to get into this video.. can not wait.
😂 Your excitement is contagious! Big up!
Mate Thank you!
Studied architecture years ago, diverged into product development. Suddenly looking to make plans for renovating a house. Never worked with autocad before (just archicad / revit / nemetschek) but your video series taught me all I need to know to get going! Love your accent btw 😊
Awesome, glad to hear man!
At the end of this series subscribers and viewers should be able to design their home! You won't get as detailed as this in the classroom. Keep it up bro!!
Thanks bro! They should have a pretty good understanding and can explore from there.
All your videos are awesome and Keep it up. As a self-taught user of Autocad architecture software, I find your video tutorials very helpful. Thanks!
My quest is to draw fully detailed and to scale my own current home which is a 2 story house in Scotland - measuring it has been a fun challenge..... Your videos and presentation are excellent and very helpful thank you please keep the good stuff coming.
hey man shout out from Ghana. amazing amazing videos man.. look forward to your videos.
Glad I came across your channel!
Very informative episode.
Seasons Greeting, hope to get a tutorial on column detailing and beam detailing and foundation detailing very soon, looking forward to your videos on such topics. Thanks again and keep up the sharing of your drafting skills to the world! God bless, be safe!
Respect. Coming soon.
I'm getting myself into Architecture acad (used to use normal acad) , your videos are excellent! keep it bro
Please can you make a video in two to three days on this "Design 3D model of a building with 2 floors including at least one bedroom, One kitchen and one washroom on each floor"?
That is amazing and interesting course.
Wish you all the best.
Thanks man. Very good videos and explanations. These videos helped me get a job. So if you are ever in Kaiserslautern, Germany you have a beer or what ever you want 😀😀
Lol you never know. Keep your eyes peeled.
This is awesome and Keep it up Bro. As a self-taught user of autocad architecture software, I find your video tutorials very helpful. Thanks!
Awesome.. I am happy you're finding them helpful. That's my aim bro. I was self taught by the way.
@@TDVision_U Good to note and keep at it.
very helpfull. thank you bro
Always rate your presentation Boss 😊😊
Hello Edward,
Thank you for another helpful vid.
I was exploring adding frames for elevation purpose, like projections or grooves, etc.
Have you made any video for that? If so, could you please share me its link?
Thank you once again! 😊
Hi, I have not done a video on this as yet but surely in the future. Thanks for watching!
thanks bro
Thnk U.
Hi . Enjoy to see your vids
Are u going ro teach styles and display system?
Thank you for your Autocad Architecture 2021 tutorials. How do I get access to series of the one-bedroom tutorials? I would like to view all of them in the series. Thanks
check out the full playlist here th-cam.com/play/PLyLLcCaRflgCTuP493CZuUOFdMdh-a_jc.html
GOOD STUFF VERY INFORMATIVE HOW MANY VIDEOS YOU GOT IM OLD MAN.LOL
First of all, thank you for taking the time to create these videos, you're talented at keeping the lessons easy to follow.
I do need help in figuring something out, hoping you or a fellow subscriber can help. When I create a section in a Views drawing, the foundation and main floor are 4" apart from each other. If I create the section in the main floor or foundation Constructs drawing, they draw correctly. I'm missing something and can't figure it out. Can anyone offer some suggestions on a setting I might be missing?
🤔 I'm not sure. I'm wondering if one of your Construct has two levels checked. Also check to make sure all Wall elevations are 0. Then make sure you Levels are good.
Grateful for your videos … they are one of a kind… when I create a views especially with all the constructs in 3d … the foundation and ground floor are apart … please any help…
You may need to make the wall elevations to be 0. Or maybe your levels are messed up
Hope you get this message sir.
I'm actually new here and I have been following you.
I tried to open my 3D view according to the steps you used...but my foundation and my ground floor plan are separated.
Yours are joined together, sir can you plz help me when I went wrong?
It's either your Levels were not set up properly, or your Walls elevation is greater than 0. Make your wall elevations 0. Thanks for watching!
Thanks for the video. I enjoying watching it. Is there a way to see hidden lines in the elevation view?
You're welcome! That is a really good question. I've never done that before so I'm not sure if its possible, but I will certainly look into it. If anyone knows how to, feel free to share with us. Respect!
How would you process in a different project phase, such as schematic design? With autocad, would use SSM and layout as sheets, ready to print the full package. Thanks!
very very good , informative lessons , but can I work by CAD architecture. instead of Revit , because most people work by CAD?
Hello, Can you shaow a video for creating a multiple floors ?
Sure...stick around.
@@TDVision_U In all your videos its only one floor, projects. Pl share some video or tell us how to view elevation for 2 or more floors. Regs
@@TDVision_U Hi, how to sink Wall Ht with levels in the Project ? When levels are changed wall hts are not getting changed. Pl help. Thanks
I have a poject with 3 leles, fondation, groundfloor and level 1.I have created a 3d vieuw but the level ! dont appear in this vieuw even I have selected to add it. What to do?
Good day. When I try to select a category, all I see is the views folder, no categories listed, using Autocad 2025, never had this issue b4; can you help pls?
I have a question. When I am placing the elevation Callout Markers for the elevations; in the dropdown menu for the scale I do not see an option for the 1/4" scale? I only have options for 1:1 all the way up to 1:5000. I am sure there is a variable somewhere that I need to change so I can see the correct scale but I am not sure what that variable is or where I can find it. Any help would be greatly appreciated. I took a screenshot but I'm not sure how to attach it here. BTW I have been enjoying watching your videos and have followed every single step up to this point in the video series. Thank You so much!!
Thanks for watching my videos man. Are you using metric or standard? Metric will be 1:100 etc... while standard will be in fractions, such as 1/4":1'-0" etc...
@@TDVision_U Yes everything is drawn in Imperial/Architectural/Standard units. It is only in the dialog box when I am trying to place the elevation markers for the elevation views (the step you are doing in minute 11:14 of your video) I do not have an option for architectural scales I only have options for engineering scales?
@@TDVision_U I figured it out. Even though the drawing was set to architectural there was a user profile that was active that was set to the wrong settings which was causing the problem.
Yay! Thanks for leaving the solution here.
@@Rocky101 i'm having the same issue but i'm not sure what user profile you're talking about, I check current profiles and it says US Imperial, where else am I supposed to look for user profile? Thanks in advance for your help.
Respect bro, I appreciate your videos! I have a question but it's not fully related to this particular video. Each time I try to open another tab (let's say a different view), it opens up in a new Autocad window instead of the same window I am working on. I searched online for solutions and I saw somewhere that I have to make dwg launcher my default launcher of which I did and it works for the moment, but each time I close Autocad and come back again, it goes back to the same issue of opening the tabs in different windows and that doesn't allow me to access my files at once. Any Idea what I can do?
🤔 It doesn't sound like a AutoCAD problem. It sounds more like a windows problem. I honestly never had that issue so I'm not sure how to fix it. But I think you need to figure out a way to make AutoCAD your default DWG app, permanently. Sounds like you only got it to work temporarily. I hope you get it fixed man. Thanks.
@@TDVision_U Thank You
Happy new year ED. I was following the tutorials from the beginning. all has been good until this one. I can't get to create views from the folders. I get a pop-up message saying: could not reference the file. What could be the reason for this?
A number of things could've happened. You may have renamed, deleted or move one of the files, or maybe an entire folder.
@@TDVision_U how do I fix that? How do I identify the culprit ?
Hey Edward thanks for creating these amazing helpful videos
With regards to this video
When I try to generate views , it says that my constructs can’t be referenced
Could you please help me with that
Did you name both files with the same name? For example, if your construct file was named "Floor Plan", then you create a view called "Floor Plan", there will be a conflict. I think that might be the issue. You may have to create a fresh new construct and copy the old content into it. Then create a new view, brining in the new construct. Then delete the old ones, as they may become corrupt. Let me know if that helped.
@@TDVision_U Hey Edward ! thanks for your response ... i have tried it and its working now
really appreciate what you're doing here
Hey Man...Thanks for an awesome series of videos....much love from South Africa. I have been following along on my software, but seem to have done something wrong. When I set up my views I cant find my furniture drawing to add??? Its there in constructs with the foundation and main house but cant find it when doing the views. Can you help me ?
Thanks too. Appreciate it.
Maybe you added the furniture construct to the wrong level.
@@TDVision_U How do I trace that?
SORTED...WHOOO HOO
thanks again for the video. are you going to teach the styles and display system in ACA? that is really the "bad" thing that thraw away peple to Revit :)
You're welcome man! You shooting some really good questions. I like it. I myself need some more teaching on styles and display systems but I will teach everything I know on this channel. I am also using Revit, to some extent, and from what I see, I think Revit is more powerful. I think people are seeing that and that's why they make the switch.
@@TDVision_U if you are using revit why you still using the "old" ACA ?
I am just learning Revit. I've been using AutoCAD for years now too. AutoCAD is still the dominant software in my country.
Hello
There seem to be a space between my foundation and ground floor please can you help me out?
Hi, many thanks for your channel and your teaching! I've a problem within the creation of the second detail. It doesn't work when I click to define the insertion point (like at 22:35) : the software doesn't running as usual and It tell me in the command line that "The creation operation hasn't any result". I tried several ways to see if It works with (reboot the software, put a short(er) name for the detail, use a different detail frame, detail another junction,...) but It doesn't work... Do you have an idea of how to solve that?
I'm not sure what's wrong in your situation. If you follow the video step by step, it should work just fine. I've never had your experience man. I hope it eventually works. I wish I could be of more help with this.
Hello Edward, I have a problem, when I do the elevation routine, and open my elevation file, the annotations appear in a scale of 1:100000 when I put 1:100 in the place callout box, I hope you can help me, regards
im having a problem with my scale and annotation once i setting up my units to meters the annotations appear larger than my drawing and also in my 3d view there are exclamation point says that the walls are overlapping can you help me please
What are the subjects needed to become an architect
Technical Drawing, Building Construction, Physics, Mathematics, Information Technology. But you will also need English. Visual Arts will be a plus if you can have it. Start doing subjects from grade 10.
Hey thenk you for this video
i have an error message saying; "we can't found the tools in this work space" when i try to mack an elevation. Do you kown what i can do?
Thank you! I'm not sure what that could be since I've never seen that issue.
I feel like my autocad is corrupt or something (cracked). A lot of stuff you're doing doesn't work for me. I've been having issues with the details view for a while now and it should work just as how you're showing it. I do the call out, I select a place, I input the information, I click on where to place it. It 'cuts' but never shows up in the project navigator under details *sigh*
Sheet pages don't update on the drawing titles, section cuts don't update on the pages I put them on, etc.
good morning, the autocad architecture tutorials are excellent, how can I listen to them in spanish ... thanks !!
I'm happy to know that my videos helped you! Unfortunately I don't speak Spanish. I wish I did though. I'm not sure how I would get my videos translated.
@@TDVision_U Thank you, Again Congratulations on the Teaching in the Tutorial Videos, If You Did a More Explanatory Tutorial About the MsProject ... Eternally Grateful ... Kind regards from Peru .. !!
Hi Question, when i go to my "place callout" scale it starts at 1'0"=1'0". It does not give me the option to choose 1/4"=1'0". Any ideas how to see this?
not sure what happened there. But you can create a new scale and add that one in. Just click on the "Custom..." button.
Hi Edward. I have a project: survey a four storey building (surveyed with laser scanner). I followed your directions at your videos and draw all the four floor plans. When I created the 3D view of the building... the storeys do not connect each other..... they are aligned vertically, but they have a vertical distance to each other!!! I have checked the levels that I used to draw the floor plans and they are OK. Do you have any idea of what may gone wrong?? Any help is appreciated!
Also I changed the units from milimeters to meters and I was asked if I want to rescale the dwg and I said Yes. Right after 4 exclamation marks appear on the screen....... but still the floor plans have vertical distance to each other...... Any clue of what I have done wrong???
Hey! Email me a screenshot of the levels used on your project. Check the about page for my email address.
hello silly me but new at autocad architecture how do you open the tab you started with :( it says project views thanks
Can someone Please explain how I can make my 4ft "Foundation" show underneath my "Ground Floor" instead of level with the house while I'm creating a 3D View. Thanks
Can we hide the brick hatch? in the section and elevation...its making chaos in the section and elevation....can we do that?? how??
Yes. Edit wall style, then go to display property.
@@TDVision_U and then which option?😅
LOL!
Edit style/materials tab/edit material button/display properties/select cmu/edit display properties button/layers tab/turn off surface hatch visibility/ok
Hope that worked.
09:58 how do i access the "Elevation (Exterior)" under the Callout tool? i'm on AutoCAD 2023 and i cant seem to find it..
Make sure you are using AutoCAD Architecture.
The 3D doesn't seem to work, could it possibly be due to working on a laptop - do I need a larger display?
I don't think so. I did a lot of drawings on my laptop and it worked fine. You might be missing a step.
I opened the floor plan from the views I created to enable me to draw the views and sections and it opened as a block without doors. What should I do to make it a floor plan like the one under construct floor plan with doors and fixtures to enable me to draw the views and section?
It looks like you need to raise your cutting plane. Do you know how to do that? I've don't it in a few videos.
@@TDVision_U Yes, I saw how you did it in one of the previous videos. Thanks, I will try that out.
I really like and appreciate what I see, only problem is they come so slowly(about 2 weeks).I feel like it takes years between episodes
Lol. Man I know how you feel. And I feel like I am moving slow in the videos too. I have a 9 to 5 and a lot of other things trying to balance. I want to make it more frequent tho.
@@TDVision_U the speed of video is perfect. Nothing slow nothing fast.
Be blessed for this work.
Lol. Respect man! Bless
But how to do this while in an active drawing?
Thanks for video, whenever i'm creating 3d views the drawing appears separate what the issue with that?
foundation , ground floor, upperfloor all appears separate in the views
That could be 2 things. Your level is not setup properly, or your drawings do not line up along the Z axis. Make sure all three drawings line up at a common point. Not sure if that helps.
@@TDVision_U hi. i have a similar problem. i have a 3 storey house. basement ground floor and first floor. levels are correct in the constructs. but when i created the floor plan there is a 700mm gap between the basement and the ground floor. everything else ok. any ideas? many thanks and keep up the good work. 10 out of 10
I used my 3d view to create elevations but it won't show me any elevations.
Hello, good day, because when I execute the detail call, only a straight line appears and not the specific Detail of the section ... why is it ... thanks, greetings
I'm not sure why this is so. Make sure you're on the right scale.
@@TDVision_U Thank you ... Excellent Videos ... Greetings ... and Happy New Year 2021 ... !
Sir why is it I can't see the extent box?
Edward, where do I find project navigator
You can type the command PROJECTNAVIGATOR
@@TDVision_U I tried that too but still wasn't visible. Could it be the type of AutoCAD I am using
I am using Autodesk AutoCAD 2019 and in the tutorial you were using AutoCAD Architecture 2023.
Please help
You're correct, you will need AutoCAD Architecture
@@TDVision_U noted with thanks
I will install. I hope it works.
What is the name of this wall type??
How to open this views property pallet
Its located on the Project Navigator pallet.
I want this personal space
From writing I was replaced with someone aim choice
I mean when I draw the section
Waa guan sir there is no episode 11
th-cam.com/video/I_c5oqCJNN8/w-d-xo.html
Hey Edward hak
Let me know
I need a path to leave
Its not working. In 2022 version .
Pleaz make sure your version is 2022 .
Or other hand sher a video on 2022 version.
What's not working?
it look blear