Hi Edward, I do appreciate a lot your videos. I would like to know if by any chance you have a video about how to draw a "California Roof" (I think the best way to describe a "California Roof" would be to "built/draw" a Gable Roof over an existing perpendicular Gable Roof); I've been trying different ways to extend a gable roof over another perpendicular gable roof without success. I'll appreciate any idea on how to draw a "California Roof". Thank you!
@@TDVision_U - I guess I didn't explain myself well... Let me try it this way: I've been trying to intersect two gable roofs in AutoCAD Architecture 2023 without success. Do you have any videos about it, or any other suggestion? Thank you!!
So I have been following your video tutorials and I have learned a lot. Thanks for these. I do however can't seem to find any help online is whether or not Acad Architecture can do raised heel roofs/trusses. Any ideas?
Thanks for watching. Trusses in ACA in general can be time consuming to model , i.e. individual truss members. You can watch my video on wooden structure to get some ideas th-cam.com/video/FkJU5CLQgaQ/w-d-xo.html . Otherwise, you could just model to a LOD 200 standard and do detail views like I did in my video on detail veiws th-cam.com/video/zxixHN87-38/w-d-xo.html .
@@TDVision_U I technically dont need the truss information for the type of work that I do. What I am looking for is more of a raised heel truss type of look so that when I build a section using the section command that the Underside of soffit is inline with the top of plate. I am in Canada so we typically use raised heel trusses now to allow for more attic insulation at the exterior walls.
Got it. I think you could perhaps extend your walls a little bit higher. There's a way to edit the walls and add extra component at the top of the wall, but I haven't done a video on that as yet.
Please, How can I get the full videos of the tutorials you've done previously. I need to follow ur series of tutorial video coz I think it's more efficient
Please i need help i resetted my AutoCAD architecture profile. And it's just look like normal AutoCAD architecture without the necessary tools i need how do i reset it back
дорогой друг хороший урок ,но у меня не получаетсядовести многослойную стену до линии крыши, почемуто многослойная стена отказывается автоматически проецироваться на линию крыши. а если я прецирую на полилинию получаются уступы сосмежными стенами. что мне делать?
Hello Please can I get the pdf file of this?🤲🏻 I was given a project in school Of a 3d plan My laptop is faulty and I’m unable to do it I’d appreciate a lot 🥺
![ILLSLICK - WINTER IS COMING [Official Video]](http://i.ytimg.com/vi/dwTMeM1zIhQ/mqdefault.jpg)
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
You are a KING! I would be so lost in AutoCAD without your videos. Blessings to you!
Ok dude, i have been coming back to your videos every time I get stuck with something in autocad so yes! … today I am clicking SUSCRIBE!
I'm from Vietnam, I really enjoyed the video in the channel with you
The best on youtube doing CAD
you a r e teaching these topics awesome!! 👌 best regards from Austria
Blessed from Ghana
Your videos are a lifesaver to any aspiring architect! 🙌🏼
This is super, my visionary
You are the best
VERY GOOD EXPLANATION AND USEFULL
Thank you for your teachings good man. God bless you.
I'll be checking this one out later. Big up YahSelf bro
Another Quality ACA Tutorial, as Always. Thanks.
Your voice is so pleasant. Also, nice and understandable. Deserve more subs!
Respect for this one. This will be useful in a project I'm working on now
Excellent, Nuff Respect Edwards!
Great video! Very well done! All your vids are very helpful and a great refresher of all the tricks ACA has to offer. Thanks
You really took your time on this video, quite understandable. Thanks
very very good channel
I have your videos playing everyday! I want to get proficient in 3D and sections to up my game. You are a great instructor!!
Thank you! I'm glad you find the videos helpful.
Well done!
Excellent!
Have been waiting for this for long
Dude i really appreciate you sharing your knowledge
You are the best
Beautiful!!!!
@17:10 how did you reset the walls?? Your videos are fantastic by the way. Thank you!
Sir your teaching method so good 👍
great tutorial! thank you. I wish I could see how to add dormers to a gable roof
pleeaaasee :D
Thank you sir❤️
Can't add ridge plate ,battens and other timber members in autocad architecture ?
very useful video, big up yuh self!
Hi Edward, I do appreciate a lot your videos. I would like to know if by any chance you have a video about how to draw a "California Roof" (I think the best way to describe a "California Roof" would be to "built/draw" a Gable Roof over an existing perpendicular Gable Roof); I've been trying different ways to extend a gable roof over another perpendicular gable roof without success. I'll appreciate any idea on how to draw a "California Roof". Thank you!
Great idea! I think you'd have to make two set roofs. One for the lower portion and another for the upper.
@@TDVision_U - I guess I didn't explain myself well... Let me try it this way: I've been trying to intersect two gable roofs in AutoCAD Architecture 2023 without success. Do you have any videos about it, or any other suggestion? Thank you!!
Can you do a SouthWest Parapit flat roof?
do you have any video explaining how to use the roof slab tab after you convert the roof?
I do not, but that's a good idea.
So I have been following your video tutorials and I have learned a lot. Thanks for these. I do however can't seem to find any help online is whether or not Acad Architecture can do raised heel roofs/trusses. Any ideas?
Thanks for watching. Trusses in ACA in general can be time consuming to model , i.e. individual truss members. You can watch my video on wooden structure to get some ideas th-cam.com/video/FkJU5CLQgaQ/w-d-xo.html . Otherwise, you could just model to a LOD 200 standard and do detail views like I did in my video on detail veiws th-cam.com/video/zxixHN87-38/w-d-xo.html .
@@TDVision_U I technically dont need the truss information for the type of work that I do. What I am looking for is more of a raised heel truss type of look so that when I build a section using the section command that the Underside of soffit is inline with the top of plate. I am in Canada so we typically use raised heel trusses now to allow for more attic insulation at the exterior walls.
Got it. I think you could perhaps extend your walls a little bit higher. There's a way to edit the walls and add extra component at the top of the wall, but I haven't done a video on that as yet.
Just found your channel, really AWESOME! 🫶🏼
when are you going to do a lean to roof or mono pitch roof .......simon from kenya here
please can you do a video on how to did the windows and the arc in this video
Please, How can I get the full videos of the tutorials you've done previously.
I need to follow ur series of tutorial video coz I think it's more efficient
Please i need help i resetted my AutoCAD architecture profile. And it's just look like normal AutoCAD architecture without the necessary tools i need how do i reset it back
дорогой друг хороший урок ,но у меня не получаетсядовести многослойную стену до линии крыши, почемуто многослойная стена отказывается автоматически проецироваться на линию крыши. а если я прецирую на полилинию получаются уступы сосмежными стенами. что мне делать?
What I'll be asking is that, how do you get the moulding around the windows and arches
I drew them manually, using the extrude and sweep commands. I hope to do a video on that in the future.
@@TDVision_U yes it wonderful , that I could see a video of that, thanks again teach
How to you draw roofs for houses with bay windows
Hello
Please can I get the pdf file of this?🤲🏻
I was given a project in school
Of a 3d plan
My laptop is faulty and I’m unable to do it
I’d appreciate a lot 🥺
Pls Make a video tutorial on camera rendering
Any tutorials for flat roofs with a parapet wall?
No but that's a brilliant idea 💡. Be on the look out! Thanks.
So how would you go about doing a roof like Dutch Gable end
Video coming soon...
Ok! Using the double pitch can create the Dutch gagle or hip end roof
Hello sir can you please make a complete drawing
Plan
Elevation
Section
All about permit
Check out my playlist. th-cam.com/play/PLyLLcCaRflgCTuP493CZuUOFdMdh-a_jc.html
And teach us also revit and photo shop
Double roof acad arch tool, how to
Please make the complete drawings in autocad
You should check out my "One Bedroom House - Start to Finish" playlist: th-cam.com/play/PLyLLcCaRflgCTuP493CZuUOFdMdh-a_jc.html
If we not make 3d in autocad then how we set the vews in autocad please teach us
Start run some ads mi boss
It's a month you are not making the videos