Most garage door weather strips are made with a very thin and cheap rubber (unless you want to spend $200), the one you used is built so much better than the average and at a great price. Thanks for posting the link for it.
Very true! This one is still holding up like brand new. It is so cheap that I don't mind if I had to change it out every couple of years. The quality seems like it will last at least a decade or more.
Very helpful! I can clearly see that I purchased a door seal for a wooden garage door when I have metal! :) I now have a clear understanding of how to install it thanks to your details. I have tiny unwanted guests that need to stay outside!! Thanks for sharing!
Wow, you had leaks along the sides and top of your door, by now I'm sure you've noticed this, I live in the NE and that would be way too much heat loss in the winter, I have a wood stove inside the garage. You might try letting the door drop down on to that gasket a bit more as well.Thanks for the video!
I bought my first house 4 years ago last month. The garage door broke the first day. I watched a few youtube videos and was able to fix it. My neighbor said he paid a company $4,000 to fix his. Thank you for you video. I've been wondering why my door don't go all the way down.
I got quoted $350 per door (2doors) and he wanted to use a very thin rubber. If he had this style I would’ve did it. But he said he never heard of this and he been doing doors for over 10years.
I have a similar situation on my garage door, where the original seal is about 4-6 inches shorter than the door on each side, and I'm pretty sure that the seal spanned the entire door when it was new. Where does all of that length disappear to? Some alternate universe? 🤔
perhaps because it literally shrunk, yup I had mine replaced 3yrs ago from edge to edge, it is currently 3" short on both ends. so my thoughts are what material would have this occur, ie vinyl, rubber, some polyvinyl??
Can you please answer my question? We have an 2 garage door similar to yours, except our garage door when down sits on the concrete, not the garage door. Our takes the U shape rubber. When we put the new rubber on we are seeing light from second panel and little light on third panel. The old rubber u shape didn’t show light and the reason we took that off it had broken on the right side. Do you have any ideas of what we can do concerning light coming through? Cindy
If the seal is in good shape, but doesn't seal well, I use foam backer rod inside, 3/4", 2 lengths, pulled into seal interior with an electrical fish tape. Works pretty well, until complete replacement is necessary. I'll be using the seal used in this video when the time comes.
You guys are lucky if you have this type of garage door track. The one I have has metal plates on the outer edge blocking the ends of the T-channel, so I can simply slide it off. I guess I need to remove the entire channel track but without moving the lower hinge plates of the door (which are bolted over it) because those plates are also attached to the pins for the high tension wires attached to the torsion spring.
You should have trimmed at the edge of the roller track for best seal, you also need to seal the right & left edges of your door. Some concrete repair will seal the bottom up.
I want to replace my seal, but I am still wondering whether the thickness of the T-slot should be 2mm or 1.5mm. It is said that 2mm will be difficult to install.
Thank you so much!! This video helped a lot and my wife was pullin it too just like yours lol one question, I bought the exact same reinfirced one as you but now my garage door wont close all the way, do I have to tweek the chain or regretably go with the cheaper thinner rubber?? What do you recommend?
Glad I could help! All you have to do is adjust your low limit on your garage door. Not sure what system you have but just look up how to adjust hight of garage door. I did that with mine so it does not bang too close to the ground.
It literally does take 2 people. I know these guys have to have watched other videos and know this. I installed the same door seal and it wasn’t as hard as I thought it would be even with 2 people. Get some help, it’ll go a lot quicker. BTW, I didn’t need anything in the track to get it to move easier. God bless!!!
you should have a hole on the side of your garage door opener motor casing, turning one way will make the door come down further - so no light gets in.
While this video was very helpful, my personal recommendation is to just hand this job to professionals. I'm an avid DIYer but the sheer amount of physical energy and strain I had to go through for this whole work was absolutely not worth it. If I can go back 2 hrs, I'll just pay the few hundred dollars and get it done by someone else. If you can afford it of course. But regardless, thank you for this video. I was able to do this myself, with an awful lot of effort, which wasn't worth it at all.
Yeah, I'm questioning all this praise, this is NOT a good outcome. I get being proud of tackling a home improvement, but this needs a second attempt. Buy the less beefy seal,like the original one, that's the proper length.
@@mettamorph4523 why? So less light comes in? He said it was because his concrete is chipped away. However, I’ll listen to you whatever you say is best.
It actually can be a one man job. I replaced my 18 foot wide bottom seal by myself with a spray can of cable lube and a small vicegrips attached to the leading end of the seal which I hooked bungy cords to. It wasn't the easiest job, took about an hour of feeding 1 to 2 inches at a time then helping the seal move down the door while the bungies helped pull as if someone was helping on that end. I recommend getting the seal for the next wider size door and cutting the ends as long as possible without interference cause these seals seem to all shrink over time.
@@adams4425DAMN! That's a great idea. I learn as much or more from the TH-cam comments than the actual videos... So many times I want to do a project and I know even if I go to a video where somebody doesn't do it right...then you will have all kinds of people chiming up in the comments telling you what they did wrong and how to do it. So then you can see 25 different opinions about his method and learn about all types of other ideas.
![[UNCUT] ขยี้ "อลิส" ปม "คลิปลับแตงโม" เปิดชื่อคนพยายามแฮก "มือถือแตงโม" I คนดังนั่งเคลียร์I 10ก.พ.68](http://i.ytimg.com/vi/_RPLEIi5Sz8/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 96 | คู่เอก "คมอาวุธ vs พันฤทธิ์"](http://i.ytimg.com/vi/ofERaO0gOsE/mqdefault.jpg)
*✅Best Garage Door Seals ➜**amzn.to/3AGwOoe** or ➜**ebay.us/y48MRY*
Super great how to video. Now I just got to get my helped involved like you did! The Amazon rubber gasket looks like the right way to go. Thank you!
Most garage door weather strips are made with a very thin and cheap rubber (unless you want to spend $200), the one you used is built so much better than the average and at a great price. Thanks for posting the link for it.
Very true! This one is still holding up like brand new. It is so cheap that I don't mind if I had to change it out every couple of years. The quality seems like it will last at least a decade or more.
Excellent video!!
Great camera angles and pointing out the T slots or one of two sizes. Helped me make one trip to the big box.
I appreciate you!
Excellent tip about placing the bottom of the garage door just above the bend, it should make installation much more easier. Thanks for your video
You should increase down travel of the door another 1/2". It will seal the gap better.
How do you do that?
@@Juva_ohe did state there were sizes. Maybe get one that is 3.5”?
Very helpful! I can clearly see that I purchased a door seal for a wooden garage door when I have metal! :) I now have a clear understanding of how to install it thanks to your details. I have tiny unwanted guests that need to stay outside!! Thanks for sharing!
Wow, you had leaks along the sides and top of your door, by now I'm sure you've noticed this, I live in the NE and that would be way too much heat loss in the winter, I have a wood stove inside the garage. You might try letting the door drop down on to that gasket a bit more as well.Thanks for the video!
Thanks for the great video. Much appreciated!
Thanks for the video. I cant believe it. I put the seal on backwards.
Love the lunch lady kitchen gloves....😅😅😅😅
Great video. I subscribed
I bought my first house 4 years ago last month. The garage door broke the first day. I watched a few youtube videos and was able to fix it. My neighbor said he paid a company $4,000 to fix his. Thank you for you video. I've been wondering why my door don't go all the way down.
Very well done video thank you
Glad it was helpful!
Great video! Super thorough and informative. Saves me so much money instead of hiring someone to do the job
Glad it was helpful! Thanks for watching!
Yep, garage place wanted to charge me $225
I got quoted $350 per door (2doors) and he wanted to use a very thin rubber. If he had this style I would’ve did it. But he said he never heard of this and he been doing doors for over 10years.
I have a similar situation on my garage door, where the original seal is about 4-6 inches shorter than the door on each side, and I'm pretty sure that the seal spanned the entire door when it was new. Where does all of that length disappear to? Some alternate universe? 🤔
perhaps because it literally shrunk, yup I had mine replaced 3yrs ago from edge to edge, it is currently 3" short on both ends. so my thoughts are what material would have this occur, ie vinyl, rubber, some polyvinyl??
Can you please answer my question? We have an 2 garage door similar to yours, except our garage door when down sits on the concrete, not the garage door. Our takes the U shape rubber. When we put the new rubber on we are seeing light from second panel and little light on third panel. The old rubber u shape didn’t show light and the reason we took that off it had broken on the right side. Do you have any ideas of what we can do concerning light coming through? Cindy
I have one bent to hell track and no idea what size should go in and had to cut and scrap out old seal, what a pain.
Nicely done video- thanks for showing this to us/
This was brutal. When your seals won’t slide in the T-track, good luck.
If the seal is in good shape, but doesn't seal well, I use foam backer rod inside, 3/4", 2 lengths, pulled into seal interior with an electrical fish tape. Works pretty well, until complete replacement is necessary. I'll be using the seal used in this video when the time comes.
Great input sounds like a plan.
You guys are lucky if you have this type of garage door track. The one I have has metal plates on the outer edge blocking the ends of the T-channel, so I can simply slide it off. I guess I need to remove the entire channel track but without moving the lower hinge plates of the door (which are bolted over it) because those plates are also attached to the pins for the high tension wires attached to the torsion spring.
Same here. That’s why I’m here searching. Haha! I’d hate to screw up the mechanism of the garage.
Was that the only way to replace the seal? By moving the metal plates?
You should have trimmed at the edge of the roller track for best seal, you also need to seal the right & left edges of your door. Some concrete repair will seal the bottom up.
I want to replace my seal, but I am still wondering whether the thickness of the T-slot should be 2mm or 1.5mm. It is said that 2mm will be difficult to install.
How do you know what size to get 1/4" or 5/16", where to you measure to make sure? Thanks
I have same question
Slide your existing one out and measure it.
I like your garage floor. What is it?
It doesn't have a finish. It is just concrete.
Thank you so much!! This video helped a lot and my wife was pullin it too just like yours lol one question, I bought the exact same reinfirced one as you but now my garage door wont close all the way, do I have to tweek the chain or regretably go with the cheaper thinner rubber?? What do you recommend?
Glad I could help! All you have to do is adjust your low limit on your garage door. Not sure what system you have but just look up how to adjust hight of garage door. I did that with mine so it does not bang too close to the ground.
It will improve as time goes by.
I been installing mines but its really hard to run it. I cant pull it, i also applied silicone lube but no shot.
I can only feed a quater of it
It literally does take 2 people. I know these guys have to have watched other videos and know this. I installed the same door seal and it wasn’t as hard as I thought it would be even with 2 people. Get some help, it’ll go a lot quicker. BTW, I didn’t need anything in the track to get it to move easier. God bless!!!
12 minutes ALONE this is soooo easy
How do you keep the new seal from moving around?
There should be a small set screw you put at both ends.
you should have a hole on the side of your garage door opener motor casing, turning one way will make the door come down further - so no light gets in.
Thank You for that bit of info. Important to read comments.
While this video was very helpful, my personal recommendation is to just hand this job to professionals. I'm an avid DIYer but the sheer amount of physical energy and strain I had to go through for this whole work was absolutely not worth it. If I can go back 2 hrs, I'll just pay the few hundred dollars and get it done by someone else. If you can afford it of course.
But regardless, thank you for this video. I was able to do this myself, with an awful lot of effort, which wasn't worth it at all.
One poster said $4,000 !! ??
If that’s true I’ll use a an hour or so to do it myself.
I was just quoted 400 CAD by handyman … doing it myself 🤣🤣🤣
Slightly INCREASE the DOWN Pressure on your OPENER...LESS light at bottom!
Use silicone spray or wd40!!! Not soapy water
Why does everyone have a track besides mine.
what about mice getting in lots of room for them to come into your hotel ; ]
The garage door should rest on the recess to completely seal not on the garage floor as the video shows.
Yeah, I'm questioning all this praise, this is NOT a good outcome. I get being proud of tackling a home improvement, but this needs a second attempt. Buy the less beefy seal,like the original one, that's the proper length.
@@mettamorph4523 why? So less light comes in? He said it was because his concrete is chipped away. However, I’ll listen to you whatever you say is best.
To anyone doing this for the first time.......this is not a 1 man operation.
It actually can be a one man job. I replaced my 18 foot wide bottom seal by myself with a spray can of cable lube and a small vicegrips attached to the leading end of the seal which I hooked bungy cords to. It wasn't the easiest job, took about an hour of feeding 1 to 2 inches at a time then helping the seal move down the door while the bungies helped pull as if someone was helping on that end. I recommend getting the seal for the next wider size door and cutting the ends as long as possible without interference cause these seals seem to all shrink over time.
@@adams4425DAMN! That's a great idea. I learn as much or more from the TH-cam comments than the actual videos... So many times I want to do a project and I know even if I go to a video where somebody doesn't do it right...then you will have all kinds of people chiming up in the comments telling you what they did wrong and how to do it. So then you can see 25 different opinions about his method and learn about all types of other ideas.
Puto franco yo tengo 69 y no me enfada estar viendo todos tus videos eres uno de los mejores gracias
Looks like the whole door needs adjusting
Put down a threshold seal
That's coming soon.
Why are you wearing gloves?
You need to adjust everything
Poor seal!!
Works for me