My first tool is "calm" when You check a PC and Your mind is confused the problems are worst and worst,My solution is "take a deep breath and relax" i've seen too many people fried a MB,ram,this video is excelent You take your time and analize,thanks.
Blank screen after fooling around in the bios and got a blank screen on boot up. Reset cmos on my own but still got the blank screen. I came here watched this video and disconnected the usb devices and that did the trick. You are a legend. Thumbs up on this video!
got a question, maybe you know whats up. yesterday, i played rainbow six siege, only happened in on going match. in menu there was nothing. but when i pressed ctrl + left mouse click it switched me to desktop everytime. a restart of the system fixed it. but id like to know what caused it, if you know about this issue
I e had a persistent black screen right after boot into 11. Have to open task manager then cancel it to get my screen back up. Guessing it's some sort of software thing with 11 considering that's when it started but who knows
The only black screen issues I've encountered were from display port sometimes not waking on boot. Selecting video output /CSM set to "Legacy Only" in the BIOS usually fixes the issue.
@@finger00 ok so windows for the last few days is starting with no issues, however if I put it to sleep and then come back - the screen doesn't 'receive' the signal. I have to take out the cable and put it back in. Any ideas? :))
Built my friend his first computer and had the same thing happen switched it out for another monitor and it worked then tried the first one and finally worked.
Thanks. My problem is somewhat different. I have a black screen apart from a working mouse cursor and I can bring up the task manager but there is no desktop background or icons showing, just black. Anyone have any ideas?
I just had the same issue Minutes after posting this it just worked again somehow. I did put the HDMI cable in the right place. Left it on the black screen for a while (drove to the shop) and when I came back, restated the pc and it worked. Don't know if that helps at all tho, I have no idea how it fixed itself
This video is very helpful and informative. Unfortunately, I had recently installed the RTX 4080 and started experiencing crashes and black screens. It turned out to be a display driver issue so nVidia suggested I run their cleanup tool and now all I get is a black screen upon bootup. I can’t even see anything when connecting to the onboard GPU. I hope I can resolve this as I can’t even use my computer anymore. 😢
I've had the issue for 2 years now, starts up with a black screen with some bios stats showing and stays there until i press the reset button, and then it will start as normal
i’ve had my pc a year and a half and it started randomly rebooting and i thought it was my psu but it’s high enough watts for my parts and idk how to fix it
Couldn't figure it out then I cleared all the power out of the system and boom, she booted right up. Didn't know that was even a thing you could do without a draining pack or something. Thank you!
Also Britec, a lot of bios manufacturers also set by default that the system will use onboard graphics, but then switch to any video card that is plugged in. I've had a couple where they plugged into the onboard video and nothing. Moved the cable to the video card and automagically it starts working.
I assumed that this video would address the black screen issue when Windows is installing updates in the background on boot up. I've seen that happen on a number of otherwise healthy Windows 10 machines. This video addresses things that are very unlikely, especially on existing systems.
Beforehand, thank you so much for tour video!. Now, i came here to say, before trying any of these methods here, when i was disconecting everything (mouse, keyboard and other stuff) to move my computer I realizad I had a Capturer card (the ones used to stream videogames on consoles). When I disconnect it i tried to connect the pc and orn it on again and i could finally pass the black screen after a lot of failed attemps I had before disconnecting it. Do you guys think, that in my case, the capture card was the reason why? And if it is, what would be the reason? J didn't built this PC, a friend did it for my birthday a year ago and I'm looking forward to learn more about all of this so I can take care of it.
though this was about the common win10 problem of black screen. pc boots ok but then stays in a black screen. press ctrl alt del and it shows the task manager but nothing else works.
I had a similar problem on my wife's PC everything was running fine except, no display. Forced a restart and the display started working. There had been a recent feature update and I found "Fast Startup" had been re-enabled (I always have that permanently disabled myself). Problem solved, Fast Startup, being a form of hibernation, doesn't always initialise the graphics card properly, whereas, restart does. Do not use Fast Startup like other methods of hibernation it can cause many problems.
My issue is similar to yours. Try to boot, no display but I can hear it get into Windows. Reboot and I get a display. Seems like it is getting worse too as sometimes I have to reboot it 2-3 times just to get a display. Tried turning fast startup off and sadly I still have the issue.
Back in win95 days the "Remove battery - Hold power for 30 seconds" worked for me, not seen that tip/trick in many decades Brian. Your audio sounds different? 👍🏻
I had this problem after a Windows update. My TV would show "No Signal" if there were none, but it was getting a signal, just no video. After unsuccessfully trying a few things, I did a system restore and got my video back. The next day I tried the update again with the same results and had to do the system restore again. This time I used my HP Support Assistant to check Windows and it found a problem with Windows Update and was able to fix it until a couple of updates later when the problem came back. This time System Restore didn't fix it, so I restored from a six month old image backup by forcing the computer off every time Windows tried to start. Doing this two or three times gets you the repair options screen without having to boot from a flash drive or booting into safe mode. Then I manually restored back up files and updated the computer and I've not had the problem again. That was about four months ago.
im getting the same issue after a windows update, when i turn my pc on i dont get image in my monitor, i just have to manually restart it and then i get signal. its so annoying....
@@maxadri1698 The same thing happened again yesterday after Windows 10 update. I know Windows partially started because I could access my files & folders from another computer. Again, I had to force the computer off and restart it and then I got video back. As you said, so annoying.
Hello Britec, thank you for the troubleshooting video. I managed to resolve the issue by taking out and putting back in the CMOS battery (without replacing new one) and also reputting in the RAMs. However, after some time of usage it happened again and I had to repeat the same steps. Do you know what is the cause of this issue and what should I do to rectify the issue at it's root? I have tried replacing a new CMOS battery too, but the problem re-occurs after some time. Many thanks!
Same here. I did the steps and something worked but then it's happening again Update: my graphics card works, ny power supply works too, it might be a motherboard issue. I also noticed that when it goes from a hard shut down state it will give me this infinite black screen, but when I hit the reset button on my tower while it is on this state (or if I reset in general) then it boots directly to windows
for anyone who had this problem i recommend taking the gpu out putting it back in hear the click sound and take one ram stick out and put it back in and don’t connect any cables other than power cable and hdmi worked for me ❤
what if you can't get into advance options? I just keep getting into preparing automatic repair follows with 20 circles across the screen.. bios from usb wont load anymore either.. just loads into black screen.. or restarts back to preparing automatic repair and more spinning circles?
I have a black screen But I could get to the bios settings to boot from flash drive with windows on it And windows installed Perfectly fine But when the computer shuts off it goes to black screen again and I have to Repeat the process and it just keeps happening.
Perfectly working pc... Used msconfig to boot into safe mode, as I have done many many times. Was going to DDU the gpu driver and try using nvcleanstall. Nvcleanstall has all the bloat Nvidia adds removed. There are like 14 processes Nvidia run when you install their driver. Hit restart into safe mode and now all I get is a black screen. Moved the GPU to the second PCI-e slot and still black screen. Yanked out the gpu and plugged into the motherboard iGpu and still have a black screen. I suspect its Windows doing what trash windows always does. It pushes updates out and breaks many things. I am going to try the Cmos clear and see what that does. Pc specs: 9900k 3090 32Gb Ram 3200 cl16 2X16gb Gskill 1600Watt Superflower Titanium
I have the exact same issue wtf. Rebooted my pc like 10 times and never turned on the monitor but then when I saw this comment and tried clicking the restart button it worked instantly.
This only happens if I have 2 monitors enabled, i can hear windows booting with the sound and everything but there's not picture on either screen. can only get it it to boot after restarting from the BIOS several times.
Hello Britec, my computer is posting but no display is shown this happened right after In stalled new drivers and I cannot go into safe mode or bios any ideas?
Two monitor + TV setup. Booted yesterday half of screen 3 draped over 1 & 2 and though I had a moveable mouse cursor I couldn't click on anything. Hard reset fixed it. Today I had black across the board though again I had a moveable mouse. Again, had to hard reset. I recently installed a screen capture program from streamlabs and videopad editor as well as ffmpeg to encode. Used them yesterday and the day before so I am wondering if one of them are doing something but I can't be sure.
In my PC, while booting.. After the windows logo comes, there's a black screen for almost 4 mins and then welcome page comes. Is it normal? If it isn't, is there a possible fix?
I also have same problem approximately that randomly i got black screen after post i mean when it should go to desktop it shows black screen and dont show any display all the parts are running but there is no display
I know this video is two years old but in hopes that someone will know. I can turn my computer on get to bios, and then it just goes no signal. I can’t even get to safe mode. Do I need a flash drive with Windows? Did Windows possibly corrupt on my last crash and I have to reinstall?
I am having this probably but its only sometimes i even did a reinstall of Windows (but i kept Files and Apps) First time booting it will be black than a turn off my PC and on it works
I have no idea how it can make sense, but ive done a lot of things, defaulted bios settings(the screen turned on), tried different things in recovery mode... so i figured that it could be windows doing weird shit, during the video i tried to wiggle the part of the hdmi cable attached to the monitor and magically, video output. Makes zero sense. Everytime i got onto bios the video worked perfectly.
Yes you have to open the screws and you wil find all the parts like cmos battery ram etc but opening it is a little bit tricky its like opening laptop you can find a technician to do it for you
I can't get into anything when I start my pc. Its just straight back screen now. The issue started about a year ago. At first, I would watch something like Hulu or Tubi, and it would go black screen and I had to shut if off and turn pc back on. Then it would only properly boot up maybe half the time. Other half, just turn on and stay at black screen. So I had to keep my pc in sleep mode. It always turns back on proper from sleep mode. But over this last year, if power goes out, that means I'd have to sit there and turn my pc on and off for like 30 to 60 mins til it properly turned on. It's so annoying. TH-cam never turned into black screen of death. Just actual movie sites. Tubi, Hulu, Apple, Vudu. But now, my pc will not turn on from black screen. I've turned on off like 50 times over a few hrs.
After setting to boot in safe mode in msconfig, I got black screen immediately after boot, so I don't see anything and I don't know what to do. I'm clueless and the PC is out of order.
I've put it on safe mode and my monitor is broken on the laptop so I'm using a TV but can't see anything since I put safe mode on idk what to do please help I can't afford to get my monitor fixed
My pc was working fine yesterday. Then today when I switched it on. Theres blank screen from the very start, no data or anything. No beep to indicate bios boot up. No signal to monitor. I was thinking graphics card but wouldn't there be any beeps to indicate problems? In my situation would it be the BIOS has failed entirely?
@@Kynareth6 that's good that you hear beep. That's far much better than what I having. I got nothing. How did yourS happen? Can you think of anything you did the last time you used it? Like hardware upgrades? I had to replace a hard drive because it broke which was weird since I didn't really use the pc much. I replaced it with an SSD and it was working great. I had it running Windows 10 and have been using it for about 5 days, i tried to switch it on today and blank screen, no beep, no text or anything. Just fans spinning. I turned the monitor off and on and to my horror it indicated "no signal". I then used that monitor for something else and it worked fine so it's not the monitor. There would be beeps to indicate something's wrong but nothing so I guess the BIOS has somehow died?
@@VTKC I wanted to erase my old graphics cards' drivers, so I wanted to boot into secure Windows 10. I restarted through msconfig and then this happened. I didn't erase the drivers. But I erased earlier to reinstall, because Radeon 6700 XT causes me problems. I've got both cards and both drivers installed. In your case it seems worse than in mine.
@@Kynareth6 well my most sincere condolences to you. I myself never had much luck with pcs. They always seem to have some problem one or another causes that render me frustrated and resort to having to buy a new pc altogether.
I have a problem that randomly i got black screen after post i mean after windows logo appears and when it should go to desktop it shows black screen i checked the cables and they are fine i dont use graphics card there is onboard graphics i want to know why is that happening to me and what is the solution
Same issue here, weird enough very rarely it does boot to Windows Desktop and I can do anything - but as soon as I change ANYTHING display related software wise, it goes back to black
Okay so I just held the power to restart and it worked. Any idea why? I had no cables loose or anything. What can cause it? Kinda got me scared for a second
Yes i have that problem that my pc boots and after booting when it should go to desktop it suddenly shows black screen but this is not happening always it randomly happens i dont know is this windows issue or is this a pc problem can you guide me please thank you
I have a strange issue with my pc. Most of the times when i start it up the lights on my keyboard flicker on and off but i get no display. it usually takes a few attempts to finally get Windows to load. but there is never a boot screen of any kind. also most of the times my keyboard does not work, i will have to unplug it several times to make it work. Does anybody have an idea of where to look?
I'm getting code 66 after trying to reset my pc to a previous version of windows 10. Can't reset bios or cmos, stuck at a damn black screen.. help anyone...
I had a black screen few minutes after a fresh windows install, as a result of windows automatically trying to install gpu drivers. The safe mode trick gave me the ability to install the proper drivers, after which I could use windows normally. Thank you so much!!!
I have a problem that randomly i got black screen after post and everything is running like fans keyboard mouse power supply but there is no display i mean after windows logo appears and when it should go to desktop it shows black screen and no display i checked the cables and they are fine i want to know why is that happening to me and what is the solution
Driving me nuts. Only sometimes, my computer boots up but my display wont show. Then Ill have to hard restart the computer and then my display will work. Everything is brand new and I even updated the bios. =(
@thegamingmanatee6803 sorry mate. No fix yet. Funny, I updated my bios and it seemed to have fixed it for like a week. And then it went back to the same thing. It's weird it's like a car that won't start till its warmed up.
Any suggestions an about how to troubleshoot a motherboard that is not supplying power to the rest of the components? When I turn on my PC the RGB lights turn on, however the CPU fan doesn't spin, and of course I get a black screen. Any help would be welcome. Thanks Great video.
i had a similar issue when i built my sons pc, worked for a week the just didnt boot, everything was powered on, but no booting, traced it back (by removing all the components) to the power supply, once i put in a new one all was ok, to find out if it is your power supply without buying one, just pop into a pc shop and ask them if they have a test bed, and to plug one of their power supplies into it.
For me it was that I had my TV used as an additional monitor out of my 2 I already hadm both monitors were black and TV was off. So naturally all I saw was two black screens. Once I got to the step of taking corns out I saw the HDMI still hooked to the TV and sure enough that was it lol
Brian. You have just talked about a black screen at boot problem that I have been having for 6 months now. The only caveat is I do have a visible mouse pointer that I can move around but that's it. I have e triple boot system XP, Win7 & Win 10. The black screen problem is on Win7 Ultimate x64. The other two OS's work just fine. Giving you few clues, is there a possible solution for my black screen of death problem at boot?
That's a different black screen of death, I had gotten it and had to say goodbye to my laptop. you will have to take to to be repaired or just replace it.
I have checked my hardware and all is fine but still black screen on boot so now i cant get in bios . Wanted to try switching off fast boot but doesn't do that b4 a driver corrupted. Now im stuck with unexpected handle with a pc that doesn't do bios . Will the recovery usb get me out of this problem ?
There was a month ago where this problem fixed it self by complete removal of the gpu driver and re install but 2 reboots later black screen again and this is the recommended gpu drivers all my cables are working as well coz b4 the driver corruption it still booted to windows log in
Hey Britec i have a tip if you having black screen just open the task manager and scroll till the down it says wsappx end task that and end the (shutdown and unsaved the abandon data and the black screen gone btw can i install windows 11 in unsupported pc my graphics is nvidia gt440 and 8gb ram and 1 Gb left
My first tool is "calm" when You check a PC and Your mind is confused the problems are worst and worst,My solution is "take a deep breath and relax" i've seen too many people fried a MB,ram,this video is excelent You take your time and analize,thanks.
Blank screen after fooling around in the bios and got a blank screen on boot up. Reset cmos on my own but still got the blank screen. I came here watched this video and disconnected the usb devices and that did the trick. You are a legend. Thumbs up on this video!
Fix PC Won't Boot Black Screen. Drop us a LIKE 👍
got a question, maybe you know whats up. yesterday, i played rainbow six siege, only happened in on going match. in menu there was nothing. but when i pressed ctrl + left mouse click it switched me to desktop everytime. a restart of the system fixed it. but id like to know what caused it, if you know about this issue
I e had a persistent black screen right after boot into 11. Have to open task manager then cancel it to get my screen back up. Guessing it's some sort of software thing with 11 considering that's when it started but who knows
The only black screen issues I've encountered were from display port sometimes not waking on boot.
Selecting video output /CSM set to "Legacy Only" in the BIOS usually fixes the issue.
Thanks
thanks, looks like it worked for me - I don't have to take the hdmi out and put it back in. It was however called differently in my bios
@@miqski I'm glad it worked for you : )
@@finger00 ok so windows for the last few days is starting with no issues, however if I put it to sleep and then come back - the screen doesn't 'receive' the signal. I have to take out the cable and put it back in.
Any ideas? :))
@@miqski There might be a bios update to remedy that issue. Or you can set windows to never put system to sleep only turn monitor off.
Built my friend his first computer and had the same thing happen switched it out for another monitor and it worked then tried the first one and finally worked.
13:29 any idea what to do if it's just completely black with absolutely no options on screen?
This is my issue. My screen boots straight black.
Wait.
@@SirRorschachJack did u find any solution?
Same issue
Thanks. My problem is somewhat different. I have a black screen apart from a working mouse cursor and I can bring up the task manager but there is no desktop background or icons showing, just black. Anyone have any ideas?
Were you able to fix it?
@@justronji9936 No unfortunately. So much else going on I've set it aside and using other devices. I will have another go though.
This just happened to me,fucken shit
I just had the same issue
Minutes after posting this it just worked again somehow. I did put the HDMI cable in the right place. Left it on the black screen for a while (drove to the shop) and when I came back, restated the pc and it worked. Don't know if that helps at all tho, I have no idea how it fixed itself
Turn off fast boot at power settings, that worked for me! Let me know if it this fixed it
This video is very helpful and informative. Unfortunately, I had recently installed the RTX 4080 and started experiencing crashes and black screens. It turned out to be a display driver issue so nVidia suggested I run their cleanup tool and now all I get is a black screen upon bootup. I can’t even see anything when connecting to the onboard GPU. I hope I can resolve this as I can’t even use my computer anymore. 😢
Try new install on your os :) Hope you got this fixed
GPU faulty?
I've had the issue for 2 years now, starts up with a black screen with some bios stats showing and stays there until i press the reset button, and then it will start as normal
i’ve had my pc a year and a half and it started randomly rebooting and i thought it was my psu but it’s high enough watts for my parts and idk how to fix it
Couldn't figure it out then I cleared all the power out of the system and boom, she booted right up. Didn't know that was even a thing you could do without a draining pack or something. Thank you!
Also Britec, a lot of bios manufacturers also set by default that the system will use onboard graphics, but then switch to any video card that is plugged in. I've had a couple where they plugged into the onboard video and nothing. Moved the cable to the video card and automagically it starts working.
I assumed that this video would address the black screen issue when Windows is installing updates in the background on boot up. I've seen that happen on a number of otherwise healthy Windows 10 machines. This video addresses things that are very unlikely, especially on existing systems.
Not that unlikely, had this very problem last week on my PC. Yet to try this out.
My computer has been working fine for 2 years and today this just randomly happened still can’t find a fix?
what about now?
same
@@jqpser181 any fix ?
Same
@@mystix7567 I managed to fix it, I switched SSD slots and that fixed it for me
Beforehand, thank you so much for tour video!.
Now, i came here to say, before trying any of these methods here, when i was disconecting everything (mouse, keyboard and other stuff) to move my computer I realizad I had a Capturer card (the ones used to stream videogames on consoles). When I disconnect it i tried to connect the pc and orn it on again and i could finally pass the black screen after a lot of failed attemps I had before disconnecting it.
Do you guys think, that in my case, the capture card was the reason why? And if it is, what would be the reason? J didn't built this PC, a friend did it for my birthday a year ago and I'm looking forward to learn more about all of this so I can take care of it.
though this was about the common win10 problem of black screen. pc boots ok but then stays in a black screen. press ctrl alt del and it shows the task manager but nothing else works.
You mean this is not a pc problem really
Thank you so much! I made the mistake of plugging HDMI into Integrated Graphics port and not the Graphics card port.
I had a similar problem on my wife's PC everything was running fine except, no display. Forced a restart and the display started working. There had been a recent feature update and I found "Fast Startup" had been re-enabled (I always have that permanently disabled myself). Problem solved, Fast Startup, being a form of hibernation, doesn't always initialise the graphics card properly, whereas, restart does. Do not use Fast Startup like other methods of hibernation it can cause many problems.
As soon as i can fix my bad driver update im going to try this coz i didnt think fast boot is a problem and it was not for a very long time
Thank you so much, that disabling fast startup sorted my issue, the screen turned black as soon as it hit windows ..
!
My issue is similar to yours. Try to boot, no display but I can hear it get into Windows. Reboot and I get a display. Seems like it is getting worse too as sometimes I have to reboot it 2-3 times just to get a display. Tried turning fast startup off and sadly I still have the issue.
Back in win95 days the "Remove battery - Hold power for 30 seconds" worked for me, not seen that tip/trick in many decades Brian. Your audio sounds different? 👍🏻
Yeah, did it live with my second mic and sounded awful
This worked for me, 👍🏾
I had this problem after a Windows update. My TV would show "No Signal" if there were none, but it was getting a signal, just no video. After unsuccessfully trying a few things, I did a system restore and got my video back. The next day I tried the update again with the same results and had to do the system restore again. This time I used my HP Support Assistant to check Windows and it found a problem with Windows Update and was able to fix it until a couple of updates later when the problem came back. This time System Restore didn't fix it, so I restored from a six month old image backup by forcing the computer off every time Windows tried to start. Doing this two or three times gets you the repair options screen without having to boot from a flash drive or booting into safe mode. Then I manually restored back up files and updated the computer and I've not had the problem again. That was about four months ago.
im getting the same issue after a windows update, when i turn my pc on i dont get image in my monitor, i just have to manually restart it and then i get signal. its so annoying....
@@maxadri1698
The same thing happened again yesterday after Windows 10 update. I know Windows partially started because I could access my files & folders from another computer. Again, I had to force the computer off and restart it and then I got video back. As you said, so annoying.
Hello Britec, thank you for the troubleshooting video.
I managed to resolve the issue by taking out and putting back in the CMOS battery (without replacing new one) and also reputting in the RAMs. However, after some time of usage it happened again and I had to repeat the same steps.
Do you know what is the cause of this issue and what should I do to rectify the issue at it's root? I have tried replacing a new CMOS battery too, but the problem re-occurs after some time.
Many thanks!
Same here. I did the steps and something worked but then it's happening again
Update: my graphics card works, ny power supply works too, it might be a motherboard issue. I also noticed that when it goes from a hard shut down state it will give me this infinite black screen, but when I hit the reset button on my tower while it is on this state (or if I reset in general) then it boots directly to windows
I’m having the same issues… did you find any solution guys?
did you find out what caused it? For me its restart causes the black screen and power off, power on start works straight to windows.@@spliik5650
As always some great tips. Always great when your video cable has been plugged in :P
That is very common.
resetting the CMOS helped me
for anyone who had this problem i recommend taking the gpu out putting it back in hear the click sound and take one ram stick out and put it back in and don’t connect any cables other than power cable and hdmi worked for me ❤
thanks, the hard drive thing worked
Wow amazing video all the way through, love it good watch
Thanks so much
what if you can't get into advance options? I just keep getting into preparing automatic repair follows with 20 circles across the screen.. bios from usb wont load anymore either.. just loads into black screen.. or restarts back to preparing automatic repair and more spinning circles?
Same problem..Got any solution?
I have a black screen But I could get to the bios settings to boot from flash drive with windows on it And windows installed Perfectly fine But when the computer shuts off it goes to black screen again and I have to Repeat the process and it just keeps happening.
Same for me were You able to fix it?
Perfectly working pc... Used msconfig to boot into safe mode, as I have done many many times.
Was going to DDU the gpu driver and try using nvcleanstall. Nvcleanstall has all the bloat Nvidia adds removed. There are like 14 processes Nvidia run when you install their driver.
Hit restart into safe mode and now all I get is a black screen. Moved the GPU to the second PCI-e slot and still black screen. Yanked out the gpu and plugged into the motherboard iGpu and still have a black screen.
I suspect its Windows doing what trash windows always does. It pushes updates out and breaks many things. I am going to try the Cmos clear and see what that does.
Pc specs: 9900k 3090 32Gb Ram 3200 cl16 2X16gb Gskill 1600Watt Superflower Titanium
So I have a similar issue where the monitor doesn't turn on when I boot the PC, but it does turn on after I restart it. Any ideas?
I have the exact same issue wtf.
Rebooted my pc like 10 times and never turned on the monitor but then when I saw this comment and tried clicking the restart button it worked instantly.
You didn't connect the boot wire
Make sure it's connected to motherboard
Found the problem straight away when you showed the rear of your computer. At the top it says 'MADE IN CHINA'. Problem solved. LOL.
That's them cheap cases for you
This only happens if I have 2 monitors enabled, i can hear windows booting with the sound and everything but there's not picture on either screen. can only get it it to boot after restarting from the BIOS several times.
Hello Britec, my computer is posting but no display is shown this happened right after In stalled new drivers and I cannot go into safe mode or bios any ideas?
Two monitor + TV setup. Booted yesterday half of screen 3 draped over 1 & 2 and though I had a moveable mouse cursor I couldn't click on anything. Hard reset fixed it. Today I had black across the board though again I had a moveable mouse. Again, had to hard reset. I recently installed a screen capture program from streamlabs and videopad editor as well as ffmpeg to encode. Used them yesterday and the day before so I am wondering if one of them are doing something but I can't be sure.
In my PC, while booting.. After the windows logo comes, there's a black screen for almost 4 mins and then welcome page comes. Is it normal? If it isn't, is there a possible fix?
I also have same problem approximately that randomly i got black screen after post i mean when it should go to desktop it shows black screen and dont show any display all the parts are running but there is no display
Try opening task manager with Ctrl alt delete. That's what I have to do to get my screen back up after 11 boot up
I get the same thing, but it does not show the welcome page at all
I know this video is two years old but in hopes that someone will know. I can turn my computer on get to bios, and then it just goes no signal. I can’t even get to safe mode. Do I need a flash drive with Windows? Did Windows possibly corrupt on my last crash and I have to reinstall?
This helped my situation, thank you.
I am having this probably but its only sometimes i even did a reinstall of Windows (but i kept Files and Apps) First time booting it will be black than a turn off my PC and on it works
If my USB drives are connected, I get black screen, (no boot). Always disconnect.
Good job as always. Now please make the same video but showing how to do fix a lap tops black screen for those of us who use a lap top please.
see what I can do
in my case i just unplugged my usb hub and pc turned back on from black screen. wierd problems😅
Seen it several times but just now wanting to say, I love the look of that rig ya got there britech!
Thanks man, selling cheap cheap
@@Britec09 just curious how much is cheap?
I have no idea how it can make sense, but ive done a lot of things, defaulted bios settings(the screen turned on), tried different things in recovery mode... so i figured that it could be windows doing weird shit, during the video i tried to wiggle the part of the hdmi cable attached to the monitor and magically, video output. Makes zero sense. Everytime i got onto bios the video worked perfectly.
This video worked for me, but when issue occured 2nd time it doesn't help.
Will this work for AIO? Monitor with CPU built in!
Yes you have to open the screws and you wil find all the parts like cmos battery ram etc but opening it is a little bit tricky its like opening laptop you can find a technician to do it for you
I can't get into anything when I start my pc. Its just straight back screen now.
The issue started about a year ago. At first, I would watch something like Hulu or Tubi, and it would go black screen and I had to shut if off and turn pc back on. Then it would only properly boot up maybe half the time. Other half, just turn on and stay at black screen. So I had to keep my pc in sleep mode. It always turns back on proper from sleep mode.
But over this last year, if power goes out, that means I'd have to sit there and turn my pc on and off for like 30 to 60 mins til it properly turned on. It's so annoying.
TH-cam never turned into black screen of death. Just actual movie sites. Tubi, Hulu, Apple, Vudu. But now, my pc will not turn on from black screen. I've turned on off like 50 times over a few hrs.
My bios and the asus logo on startup is half black screen but when I get to my desktop it's fine I'm confused.
After setting to boot in safe mode in msconfig, I got black screen immediately after boot, so I don't see anything and I don't know what to do. I'm clueless and the PC is out of order.
I got this thing we’re I just installed windows and when it’s going to set up my screens black with eng in middle of screen
I've put it on safe mode and my monitor is broken on the laptop so I'm using a TV but can't see anything since I put safe mode on idk what to do please help I can't afford to get my monitor fixed
My pc was working fine yesterday. Then today when I switched it on. Theres blank screen from the very start, no data or anything. No beep to indicate bios boot up. No signal to monitor. I was thinking graphics card but wouldn't there be any beeps to indicate problems? In my situation would it be the BIOS has failed entirely?
I've got a similar problem, but I hear the BIOS beep, just see only black screen.
@@Kynareth6 that's good that you hear beep. That's far much better than what I having. I got nothing. How did yourS happen? Can you think of anything you did the last time you used it? Like hardware upgrades? I had to replace a hard drive because it broke which was weird since I didn't really use the pc much. I replaced it with an SSD and it was working great. I had it running Windows 10 and have been using it for about 5 days, i tried to switch it on today and blank screen, no beep, no text or anything. Just fans spinning. I turned the monitor off and on and to my horror it indicated "no signal". I then used that monitor for something else and it worked fine so it's not the monitor. There would be beeps to indicate something's wrong but nothing so I guess the BIOS has somehow died?
@@VTKC I wanted to erase my old graphics cards' drivers, so I wanted to boot into secure Windows 10. I restarted through msconfig and then this happened. I didn't erase the drivers. But I erased earlier to reinstall, because Radeon 6700 XT causes me problems. I've got both cards and both drivers installed. In your case it seems worse than in mine.
@@Kynareth6 well my most sincere condolences to you. I myself never had much luck with pcs. They always seem to have some problem one or another causes that render me frustrated and resort to having to buy a new pc altogether.
@@VTKC 😥
I have a problem that randomly i got black screen after post i mean after windows logo appears and when it should go to desktop it shows black screen i checked the cables and they are fine i dont use graphics card there is onboard graphics i want to know why is that happening to me and what is the solution
You need to first determine whether its software ort hardware related.
Same issue here, weird enough very rarely it does boot to Windows Desktop and I can do anything - but as soon as I change ANYTHING display related software wise, it goes back to black
Okay so I just held the power to restart and it worked. Any idea why? I had no cables loose or anything. What can cause it? Kinda got me scared for a second
How to protect a partition from being deleted?
What if the machine is on secure boot?
Should not effect it
Thank you thank you thank you!!
Turn of Fastboot.
Very nice.
I am waiting on new graphics card to arrive.
My screen says no signal.
I have done some research so I hope it's just the graphics card.
Follow this guide
@@Britec09
Thank you I pay attention to all your videos.
You're of great help to a lot of people.
Keith Kuhn
first it is best to differentiate between, no post, no power and no boot.
Yes i have that problem that my pc boots and after booting when it should go to desktop it suddenly shows black screen but this is not happening always it randomly happens i dont know is this windows issue or is this a pc problem can you guide me please thank you
after all that when i restart my pc it goes black again
I have a strange issue with my pc.
Most of the times when i start it up the lights on my keyboard flicker on and off but i get no display. it usually takes a few attempts to finally get Windows to load. but there is never a boot screen of any kind. also most of the times my keyboard does not work, i will have to unplug it several times to make it work.
Does anybody have an idea of where to look?
I fix it just i follow what he said thank you
Mine is completely black and on the pc and light blinking of caps lock
I'm getting code 66 after trying to reset my pc to a previous version of windows 10. Can't reset bios or cmos, stuck at a damn black screen.. help anyone...
Thank you for the help
I had a black screen few minutes after a fresh windows install, as a result of windows automatically trying to install gpu drivers. The safe mode trick gave me the ability to install the proper drivers, after which I could use windows normally. Thank you so much!!!
Black screens are so rare that they almost never occur. The most common cause for black screen would be a dead backlight to a screen.
Unplug it and try it .
I have a problem that randomly i got black screen after post and everything is running like fans keyboard mouse power supply but there is no display i mean after windows logo appears and when it should go to desktop it shows black screen and no display i checked the cables and they are fine i want to know why is that happening to me and what is the solution
@@FarHaN9 I do not know that the solution is. Maybe you need to double check your cables to see if they are plugged into the right slots.
@@FarHaN9 I had the the same issue after new Ram stick install i plugged my mouse in and clicked a few times and it worked 😂
in Ccleaner program there is option for update
can i use it for update my drivers is it save ?
Thanks
that doesnt work my display keyboard and mouse still dead must be a gpu problem
Driving me nuts. Only sometimes, my computer boots up but my display wont show. Then Ill have to hard restart the computer and then my display will work. Everything is brand new and I even updated the bios. =(
Any fix for you? Dealing with the same issue on a B450M Pro4 after the latest BIOS update and upgrading to a 5600x
@thegamingmanatee6803 sorry mate. No fix yet. Funny, I updated my bios and it seemed to have fixed it for like a week. And then it went back to the same thing. It's weird it's like a car that won't start till its warmed up.
bcdedit not working in cmd! Please help!
Thanks.
Do a video on blue screen errors
I already fixed mine. I installed Linux.
Nice one
Congrats
Thanks so much bro
My problem was the HDMI Connection was going bad.......thanks !!!!!
Yeah, that can happen. Do you have another port you can use
Any suggestions an about how to troubleshoot a motherboard that is not supplying power to the rest of the components? When I turn on my PC the RGB lights turn on, however the CPU fan doesn't spin, and of course I get a black screen. Any help would be welcome.
Thanks
Great video.
i had a similar issue when i built my sons pc, worked for a week the just didnt boot, everything was powered on, but no booting, traced it back (by removing all the components) to the power supply, once i put in a new one all was ok, to find out if it is your power supply without buying one, just pop into a pc shop and ask them if they have a test bed, and to plug one of their power supplies into it.
For me it was that I had my TV used as an additional monitor out of my 2 I already hadm both monitors were black and TV was off. So naturally all I saw was two black screens. Once I got to the step of taking corns out I saw the HDMI still hooked to the TV and sure enough that was it lol
Brian. You have just talked about a black screen at boot problem that I have been having for 6 months now. The only caveat is I do have a visible mouse pointer that I can move around but that's it. I have e triple boot system XP, Win7 & Win 10. The black screen problem is on Win7 Ultimate x64. The other two OS's work just fine. Giving you few clues, is there a possible solution for my black screen of death problem at boot?
That's a different black screen of death, I had gotten it and had to say goodbye to my laptop. you will have to take to to be repaired or just replace it.
Bruh for some reason it's telling there no signal at all.
I have checked my hardware and all is fine but still black screen on boot so now i cant get in bios . Wanted to try switching off fast boot but doesn't do that b4 a driver corrupted. Now im stuck with unexpected handle with a pc that doesn't do bios .
Will the recovery usb get me out of this problem ?
There was a month ago where this problem fixed it self by complete removal of the gpu driver and re install but 2 reboots later black screen again and this is the recommended gpu drivers all my cables are working as well coz b4 the driver corruption it still booted to windows log in
i use tecware case too
thanks work for me
Got it! Mine wasn't connected to the graphics driver. Thanks a bunch!
"Though shall test power supply voltages " (under load)
I normally just swap out PSU for test, quicker and more reliable for testing
I think you need a few more FANS in your build, just to make sure there’s enough through cooling!😂🇨🇦
You know it lol
Hey Britec i have a tip if you having black screen just open the task manager and scroll till the down it says wsappx end task that and end the (shutdown and unsaved the abandon data and the black screen gone btw can i install windows 11 in unsupported pc my graphics is nvidia gt440 and 8gb ram and 1 Gb left
Run Linux instead.
Good
Second
lol
@@Britec09 lol
My computer deleted its own system 32!! I got a boot up disk but the screen doesn't actually turn on anymore. Hp pavilion 23
Wait a Minute wtf i got the Same mouse like him it's Logitech with grey Lines yoo