Next Level Racing GTElite Aluminium Simulator Cockpit Instructional Video
ฝัง
- เผยแพร่เมื่อ 2 เม.ย. 2022
- Here is a video that will support you during the build of your new GTElite Cockpit! Please note that this video can support you with the build of the Wheelplate, Front and Side Mount Edition. If you require further assistance, please email us at support@nextlevelracing.com.
Find out more about the Elite range of cockpits and accessories: nextlevelracing.com/elite-ser...
Find us on:
Facebook: / nextlevelrac. .
Instagram: / next_level_raci. .
Twitter: / nextlvlracing
Website: www.nextlevelracing.com
Discord: discordapp.com/invite/TjPyQFV
Facebook Owners Group: bit.ly/2FXyIJs - เกม
![[UNCUT] ที่นี่ที่แรก ปู - หาญส์ พูดถึงมหากาพย์หนี้สิ้น I คนดังนั่งเคลียร์ I 10 ก.ค.67](http://i.ytimg.com/vi/KDNA9DZ0p4U/mqdefault.jpg)
Going to be a tall order getting this one over the line for my 40th, but I’m going to give it a red hot go. Looks amazing and quite straightforward to assemble too.
Hi there! We have made it as easy as possible to build with our indepth instructions and videos. Good luck getting it over the line!
thank god for t nuts
Changing the order on some of the instruction will make life a lot easier. E.g. butt kicker should be installed before screwing into frame. The easiest way to install the post is to mount them to the connection plates first, then pre-screw w/ T-Nuts loosely, then slide it into the base frame through the front. Same steps should be done on one piece wheelbase plate.
Thank you for sharing your feedback. I understand your frustration and concerns regarding the difficulty of aligning the T-slot nuts and the potential risk of scratching. We appreciate your input on this matter. Our team has actually developed an alternative method that addresses these challenges. By holding the post with one hand while screwing in the nuts with the other, you can achieve a smoother installation process, even without a second person present. We hope this approach proves helpful in improving your experience. If you have any further suggestions or questions, please feel free to let us know.
😍😍😍😍
Spent a couple of hours, and got about half way done (doing this by myself). One thing that’s difficult is getting each arm on the side to line up properly with the t-nuts and with each other, so that the wheel plate isn’t off.
It’s been a constant struggle to make sure I loosen one side to adjust the other side to make sure that the bolts go in smoothly so it’s lined up properly
Also, does the butt kicker seat slider in the front or rear?
Hi, I am sorry to hear the install of the wheel plate has been difficult. We designed the wheel plate to be as strong as possible which in turn makes it quite heavy. We recommend assembling the cockpit with two people though it can be done with one. The markings on the extrusions may help in aligning the uprights and the supplied level will provide feedback on the final positioning.
The Buttkicker pole can be installed on either the front or back 4040 extrusions.
Hello NLR, the Fanatec DD Pro wheel has mounting points for their included t-nuts that are M6 (countersunk) bolt compatible, but the cockpit only provides M8 bolts (p.22-23). I couldn't see any M6 type mounts in the kit nor in the manual (p.6-7). I also watched the video but couldn't see anything at 6:13 that would help. Am I missing something? No big deal as M6 countersunk bolts are generally available at hardware shops.
Hi there, In the video we show the Fanatec DD Pro connecting to the Front Side Mount GT Elite Cockpit. The spacer plate has a hole for an M8 Countersunk bolt and the connection between the Fanatec DD Pro and the Front Side Mount Spacer Plate is not possible without extra hardware. If you would like to get in contact with our Support Team, they will be sure to assist you can contact them directly at support@nextlevelracing.com
Does it matter which grooves you put the bolts into on the mounting arms through the side mounts. I've got them in the same lengthy holes but I noticed you guys did one in each.
Hi there, we recommend mounting this through both channels as recommended by our RnD team. Hope this helps!
Will you guys be adding lockable casters to the accessories list for this cockpit? Also, if one wanted to purchase the profile to complete the shifter mount, are you guys planning on selling said profile and hardware in a kit?
Hi there! We do have caster wheels available as a SKU, some of our resellers have these available including Amazon. We do not however list this on our website as an accessory. If you need a hand, please email us at support@nextlevelracing.com
@@NextLevelRacing Thanks for the reply. I just emailed support.
Hi Next level racing, just wanted to give you a heads up, that you misspelled Aluminium in the title. Also wanted to say, just got two wheelstands 2.0s. One for my Dad's house and one for my Mum's as I loved it so much.
Hi there, thanks for the positive feedback! We appreciate it. We spell it both ways to cater for our US and Global audience. In the US, it is Aluminum.
Whats the height from floor to top of seat (approx) and what's the max height adjustment for the feet? Thanks
Can I use this guide to build the F-GT Elite as well?
Hi there! We do have a guide for the F-GT Elite as well! Check it out!
Are those 4 rubber ball(legs) adjustable? How high can it go ? 1 inch ?
Great question! The feet on the Elite cockpit screwed in all the way adds 40mm to the height, with 20mm of additional height adjustment.
@@NextLevelRacing Thank you for the reply. It helped me a lot.
Is anybody know how to mount a Logitech g pro wheel? These holes are not lining up
Hi me again :P I am now having trouble with the nylon washers and bolts that go through the side mount into the front mount. They keep bending and flexing and are not tightening into place. Any tips?
Hi there, you can reach out to our Support Team directly at support@nextlevelracing.com
@@NextLevelRacing I have done so and have no received a response as of yet. :)
Hi there, just checking in you have been responded to?
@NextLevelRacing I received one response which requested for more information. I have sent said information and have been waiting for a response since Thursday
@@dano579 Not a problem, I have marked this urgent with your Customer Service representative!
Does anyone know if my Logitech g pro wheel will fit this before I continue building
Hey there, on the Wheelplate edition it will, you will need to use the back two mounting holes to mount it. Hope this helps! :)
Is the thrustmastert300rs gt compatible with this cockpit.
Hi there! Yes, it is! It's compatible with all major electronic brands.
@@NextLevelRacing Thank you so much , im deffinetly gonna get it now.
I don't see why anyone would buy the FGT Elite over this? 🤔
Hi there! The F-GT Elite and the GTElite Cockpits are both fantastic options for different reasons. The F-GT Elite is still a "100/40" profile rig that can be placed in the Formula position and hybrid position. The GTElite is for the GT position and is a "80/40" rig so they do have their differences!
Boosted Media on TH-cam has reviews of both. His review of the GT Elite shows the difference in profile thickness, which gives added rigidity for the F-GT.
I have the GT Elite. It is a wonderful piece of kit, though 😊😊😊
@@supercededman then the name seems a bit of a misnomer. Wouldn't that be called the GT Elite Lite?