These older seasons are pretty good. The newer ones are downright unwatchable. 3 minutes of tech if your lucky, 7 minutes of TV commercials and 20 minutes of Cornwell and e3 and other company infomercials.
This show used to be a regular part of every weekend for me.. even way back before and during the copperhead build I've been hooked.. Stacey is awesome. His wealth of knowledge makes every project achieveable and we'll explained. And it's always done right.. I'm so glad I found him again..binge watching can now begin..
Interesting episode, and I'd love to do something like that to my truck ( I have almost the exact same one ), but there's NOTHING about this that's cheap and easy. Also, although the truck is paid off, it's not worthless, and I'd be concerned about putting that much extra HP through an otherwise stock setup. Adding more power is fun and all, but not if it blows your engine, transmission, diffs, etc. More information about this kind of thing would have been better than the superfluous stuff that took up the entire 2nd half of the episode. We didn't even get to see the headers put on or hear the truck run once it was all done.
As long as you dont put too much boost through the motor, stock internals will be fine. People push it and want more and more power and amp up the boost and break the rules and they blow the engine. Same thing with nos. Stay withing thenrules and you will be fine. I love My Ram Hemi I've boosted her with stock internals and stay in low range boost and she runs great.
You’re right I’m an aircraft mechanic for Cal Fire & I turn wrenches 8-10 hours a day 6 days a week. On my rare time off I don’t like to turn wrenches unless necessary. I watch this show and dream 😎
Got that right! I'm still hunting for a 66 Malibu to restore, and when my Wife looks at what I am looking for specially on E bay, she's say's "OH that's nice honey maybe someday, I don't think so!
This is literally the best channel I have come across because not only is entertaining, but educational, inspiring and the reason why I want to start a project. Thank you for such great content. Keep doing a great job @ GearNation and all you Gearheads on this channel. God bless!
What about the transmission? Thats a pretty big jump in hp (160) to just ignore the transmission. Im not knocking the install im just saying usually with that much of a gain a torque converter is usually upgraded for a start.
Because you have to have the computer flashed after this! Cheap my $#% around 7000 if not more! If you could tow your to a place to have it computer flashed.
i hope one day i can travel to learning all things about cars and trucks from you guys , guys here in my country not good enough to teaching that amazing skills which you have out there . i planing to opening a big project to build rebuild and fixes cars & trucks here in my country egypt we need to bring those wonderful skills here but first i need to study every things from guys like you >>> any recommendations ? with my respect .
I like shows like this. 30 minutes and they show you how to do a job for a car or what is needed. The other shows where it is an hour and is them BSing are crap.
Love this channel but what happened to us seeing the net gains? I'm sadly disappointed as I've really been considering doing this to my 5th gen 2019 Ram. Results would have been an awesome ending to this good video.
I also see there isn't really any answers to anybody's questions that are asked it all sounds good and looks fairly reasonable to do but costs and the building of the project wasn't finished the building went rather much faster than I know that it would take and being rather confusing I believe to most people watching it with a bunch of questions not answered
My 99 5.9 Magnum needs one of these.. Plus, I can use those Headers.. Do I jus need to bring my Van over to your place and for a couple of hours or so then..??.. I'm absolutely interested in the set-up.. Please let me know...
For an actual install video of the American Thunder FlowMaster cat back, see this video th-cam.com/video/C1hQL_ynHfI/w-d-xo.html (Hardcore Henry Style)
So I just looked one up on pro chargers website. Kits for that year START at 6,300 and go up from there!! Like I said; This show is made for people that crap money and wipe with 20’s. Those people will just pay someone to install this I don’t know why you have a diy channel that caters to rich people.
@@M1A4R8K8 Dude all that matters is how it performs. Your probably that annoying twit driving circles in the neighborhood with your cherry bomb mufflers with faux chrome tips. Lol
He said it was a 7 yr old paid off truck in the first few mins of the video. He even said why one would do it. I just got my supercharged Denali tuned for the same reasons.
Its true my Chevy is over 400 stock then I programmed it now I'm almost 450 but the pro charger goes by the size they can go from 100 to 500 go easy but stock Turbos add a 100 or more hp
Haha. Guess you don't know how engines are rated. The horsepower isn't rated to the wheels rather just the output of the engine with accessories without being hooked to the transmission. So yes if you look at wheel HP those Hemis put out about 325hp.
@@caniwitech if you want one bad enough I'm sure you could find one. And yes, the eagle (6.1) intake manifold does better than the 392 intake on a 5.7l. Combining that with long tubes gives you a torque quicker and holds it longer. If you look a dyno results you may only gain 15 lb ft overall but you gain 35 to 50 lb ft the whole way to the max torque just from those 2. Basically it levels out your torque curve, it shoots way up at the beginning and then holds the line clear to the max torque instead of an actual curve. Hose power curve is helped but not like the torque. On one guys charger he put a used ebay 392 intake, with cam and tune, and he is dynoing over 400 hp and 430 torque to the ground. That car is faster than a 392 car. The 6.1 intake is better for that car.
@@sonsofliberty3081 I never said it wasn;t better, or that it didn't perform better. I just thought you saying simply picking one up from a junk yard a but of oversimplification. If someone was lucky enough to find a wrecked 6.1 in some random junkyard, there is no way the yard would sell just the intake. It would make selling the much more profitable engine much much harder. Most likely, your junkyard 6.1 intake is actually a 2500 buck craiglist intake with a free 6.1 attached to it.
Hi me and my son love the show. I'm an old school mechanic. I need some direction on a cam, lifters , pushrods. What type of tuner to get . For my son's first truck a 2004 Ram 1500 5.7 Hemi looking for a fast street truck. Any information anyone has that can help please send any information to jca1962c @gmail.com. thank you guys. Stay safe in
I was an Auto Mechanic for 18 years, before I decided to give it up, and if there is one thing I always noticed when young people started adding on all these bolt aftermarket products the vehicle would all of sudden come down with a bad case of what we used to call "Tinker IDUS " that's right teaker idus, that is a disease a car or truck get when you start adding on all these aftermarket parts, it may work good in beginning but then all of a sudden 6 months maybe a year things start going wrong, engine lights start appearing and you can't figure why, being in the business I have seen it all, and trust me when I say "Tinker IDUS once its in your engine bay it spreads, and then your local Mechanic like me have now figure out what the problem is. so my advice to anyone "LEAVE IT ALONE" if it aint broke don't fix it!!
I am a level 3 Heavy Duty Diesel Mechanic in Ohio with automotive background. If you are a young man or young woman who wants to learn about this industry near me or anyone in the country message me I will gladly teach you
![เขามัทรี - เอ็กซ์ ศุภกฤต - จอนนี่มิวสิค [ Official MV ]](http://i.ytimg.com/vi/AS9ufKuQIVs/mqdefault.jpg)
With all of that added to the RAM, one with sense would think a start up and quick drive on video is surely in the video...
0
Can't show the inferior dodge junk blow up.
Oofenheimer
Really 😒
Man I’m happy I subscribed I used to watch this show all the time until my cable network didn’t offer it anymore . Thanks for sharing 👍🏼
These older seasons are pretty good. The newer ones are downright unwatchable. 3 minutes of tech if your lucky, 7 minutes of TV commercials and 20 minutes of Cornwell and e3 and other company infomercials.
This show used to be a regular part of every weekend for me.. even way back before and during the copperhead build I've been hooked.. Stacey is awesome. His wealth of knowledge makes every project achieveable and we'll explained. And it's always done right.. I'm so glad I found him again..binge watching can now begin..
Thats great getting the kids involved in this kind of work. There is no doubt its a dying art/hobby. Love this show!!
I disagree. Im 23 and auto techs are so incredibly common among my age bracket, its what steered me away from the profession.
You're amazing to watch because you make every job look almost effortless and easy
Interesting episode, and I'd love to do something like that to my truck ( I have almost the exact same one ), but there's NOTHING about this that's cheap and easy. Also, although the truck is paid off, it's not worthless, and I'd be concerned about putting that much extra HP through an otherwise stock setup. Adding more power is fun and all, but not if it blows your engine, transmission, diffs, etc. More information about this kind of thing would have been better than the superfluous stuff that took up the entire 2nd half of the episode. We didn't even get to see the headers put on or hear the truck run once it was all done.
As long as you dont put too much boost through the motor, stock internals will be fine. People push it and want more and more power and amp up the boost and break the rules and they blow the engine. Same thing with nos. Stay withing thenrules and you will be fine. I love My Ram Hemi I've boosted her with stock internals and stay in low range boost and she runs great.
Most people spend what time they have watching these shows and not wrenching
You’re right I’m an aircraft mechanic for Cal Fire & I turn wrenches 8-10 hours a day 6 days a week. On my rare time off I don’t like to turn wrenches unless necessary. I watch this show and dream 😎
You forgot one problem,
Our wives.
The minute any guy wants to play with his toys,
SHE gets involved and nothing gets finished
Marc Aliventi Aliventi you picked the wrong wife.
Got that right! I'm still hunting for a 66 Malibu to restore, and when my Wife looks at what I am looking for specially on E bay, she's say's "OH that's nice honey maybe someday, I don't think so!
Why did you marry her then? Either you're a man child, or you enjoy being told what you can and can't do. Sounds like a sad marraige
@@paulw1059 she changed after our oldest daughter committed suicide
@Marc Aliventi Aliventi, Lol 😂
I use to watch you every weekend on cable tv
This is literally the best channel I have come across because not only is entertaining, but educational, inspiring and the reason why I want to start a project. Thank you for such great content. Keep doing a great job @ GearNation and all you Gearheads on this channel. God bless!
Um 7yrs old and paid for! Dang I still haven't bought one yet!
Great job on the dune cat. Congratulations boys
Nice work on the Ram
Hopefully i can do all that to my 2013 bighorn
Gonna cost alot no doubt
But jut shy of 600 hp
Holy cow!!
My 2015 ram 5.7 sport is lacking this procharger; been debating getting it cammed or sc.
Shop needs to come back to high schools. AI is going to replace a lot of white collar jobs but people are still going to need physical labor done.
Back in the day we had books IF you could find one. Now kids have everything with the internet to learn. Only thing they need is tools.
Where is the payoff on the ram? I wanna see the results of the build with the headers exhaust and pro charger
Not doing anything with the transmission or gapping your rings? I wonder how long that will last
It take me 1 month to do all that and I’d have to consult a mechanic buddy of mine to help me fix everything I screw up. 🙈
What about the transmission? Thats a pretty big jump in hp (160) to just ignore the transmission. Im not knocking the install im just saying usually with that much of a gain a torque converter is usually upgraded for a start.
Why didn’t throw all those old parts on the floor like usual?
160 HP gain is a stretch for about $7,500, while that pushrod 5.7 is 390HP at the crank.... but about 300 at the wheels.
You have the option to go higher up to 18
Love the working with the kids
Damn, did I miss something? Does he take the truck out to test it? Get it on the dyno ? Guess were not special enough ????
I thought the same thing... would have liked to hear it at least with the headers and cat back.
Life is just so cruel sometimes isn't it?
Wtf ! Why didnt u show starting the dodge ??
Because you have to have the computer flashed after this! Cheap my $#% around 7000 if not more! If you could tow your to a place to have it computer flashed.
Do you not need to gap the piston rings for this?
Not if you are going over 8 pounds of boost
It would be great if the was a follow up to tell how the factory 6spd auto puked it's guts with that extra "160 hp"! LOL
i hope one day i can travel to learning all things about cars and trucks from you guys , guys here in my country not good enough to teaching that amazing skills which you have out there . i planing to opening a big project to build rebuild and fixes cars & trucks here in my country egypt we need to bring those wonderful skills here but first i need to study every things from guys like you >>> any recommendations ?
with my respect .
I like shows like this. 30 minutes and they show you how to do a job for a car or what is needed. The other shows where it is an hour and is them BSing are crap.
Only $6700 at Summit for a Silverado!
That’s a rip off.
The one thing that I want to know about this kit is whether it will mess up my MDS. I kind of want to retain that.
Generally you lose the mds system.
No test drive?? No dyno?? Man... kinda like: dinner, movie, foreplay...followed by “I gotta go.” 🙄😂
Well, could I do it? Am pretty sure I could. However, it’s certainly not just a bolt on when you have to drill your crank.
drill the crank,ill definitely screw that up.lol😕
Sad no test drive. Like cutting out last page in a book.
Love this channel but what happened to us seeing the net gains? I'm sadly disappointed as I've really been considering doing this to my 5th gen 2019 Ram. Results would have been an awesome ending to this good video.
Teach them while they are young .. That's great 👍 future car guys like me
Do you really need a cooling airbox with a procharger? Thank you.
I also see there isn't really any answers to anybody's questions that are asked it all sounds good and looks fairly reasonable to do but costs and the building of the project wasn't finished the building went rather much faster than I know that it would take and being rather confusing I believe to most people watching it with a bunch of questions not answered
To bad it's on the 6 speed and not the 8
I always thought if you put a Super Charger, or turbo you have to go one heat range colder on the plugs minimum
I thought so as well
"We Gotta Teach"? First "THEY" have to be interested and then "THEY" need to be teachable!
I guess to some people 6700 is cheap. Looks more like a 4k system. There isn't much to the system.
You my favorite person in the world
I had a set of those flowtech headers on my 2003 4.7L. Junk. Garbage. Kept cracking around the egr tube. Very thin walled tubing. Never again.
Good looking out with this valuable information because I was almost. Sold
what did you do with the adjustable Air gates that cover the radiator?
My 99 5.9 Magnum needs one of these.. Plus, I can use those Headers.. Do I jus need to bring my Van over to your place and for a couple of hours or so then..??.. I'm absolutely interested in the set-up.. Please let me know...
stacey check this out david
"These are emissions legal in 49 states"...thanks California
Everyone. Let's put on 200 more hp and not do anything to thre trans to hold up to it. Lmfao. Wonder how long it'll last
The pro-charger is only adding 160 hp...lol
At 4:04 what is left on the end of the crank after the pulley comes off?
where's your video when you leveled that truck?
I mean Flowmaster is grabbage, has so much drone but looks like a nice 450 whp build
When are we going to see more videos on the z28 Camaro??
In the pickup truck job he forgot to mention that with the supercharger, you now have to run 92 OCTANE!!!! so much for a DAILY DRIVER! $$$... ouch
It is a bit pricey that's true ($6.25/USGal or $1.65/ L) but I'd still do it. In a few years when my truck is out of warranty.
$6.25 a gallon lol?? Wtf we got 93 for $2.95 in ms
Prices have gone up here since I posted. $6.47/USGAL for regular and $6.85/USGAL for mid grade. Highest prices in North America here in Vancouver BC.
@Mr Sunshines You're an idiot. It's actually dependent on compression ratio and in most applications you should run higher octane to avoid detonation.
If concerns are gas prices suggest you get a Honda civic and leave truck at home. My last truck used premium 14 mpg, now my new 2019 gets 22 mpg.
Hi Stacy,can you tell me if pro charger makes a kit for my dodge ram 1500 with the 4.7??? It's a 2002....with 30,123 miles
@ rockym... Just look on their website or call the company
stacey david how are you? how available is this kit?
Hey one question when you put headers on the check engine light will stay on right??
Not necessarily. If you have long tube headers and you take out your cats and o2 sensors then it will but you should be able to fix it with a tune.
Randomstuff thanks man for answering my question cuz I hate to drive with check engine light on
What happened to the rest of the story of the Ram supercharger? Went from the Ram to advertising.
I hate having to work on exhaust.
Do a WK2 5.7.
Where can I order this kit? And how about much does it run? Is there any other engine work I need to do first
what do you drive
Chance Windham 2012 ram 1500 5.7
That kit costs $7000 what the fuck? I can almost buy a hellcat crate engine for that much.
For an actual install video of the American Thunder FlowMaster cat back, see this video th-cam.com/video/C1hQL_ynHfI/w-d-xo.html (Hardcore Henry Style)
shorty headers do nothing for your engine, only long tubes make a difference
Just a poor Canadian, I wish I could go to that school
A cat back is a horrible way to only exhaust. heads too and at that point redo everything.
Is Ca one of the 2 states it isn’t legal in ???
Do you even need to ask? We can't do shit in this hellhole.
So I just looked one up on pro chargers website. Kits for that year START at 6,300 and go up from there!! Like I said; This show is made for people that crap money and wipe with 20’s. Those people will just pay someone to install this I don’t know why you have a diy channel that caters to rich people.
I notice they never mention price on anything. This show is for people that have more money than brains
Who ever owns that truck is a lucky mo fo. All that free stuff for the advertising. Sign me up
After all that no start up with everything complete and worst of all no test drive. If you really understand gearheads you would know that.
You'll never have to worry about a rusty seam again but you're redoing a seam.... Not to logical.
I was fixing to say... That's a procharger. Not a supercharger. It's a belt driven turbo. A supercharger has billet triangle style twisted rotor
Procharger is a brand that makes belt driven superchargers. This is a centrifugal supercharger.
Centrifugal superchargers are Poor Man's power, nothing beats the sound of a turbo
@@M1A4R8K8 Dude all that matters is how it performs. Your probably that annoying twit driving circles in the neighborhood with your cherry bomb mufflers with faux chrome tips. Lol
Drilled your crank and voided your warranty. Lol!!
He said it was a 7 yr old paid off truck in the first few mins of the video. He even said why one would do it. I just got my supercharged Denali tuned for the same reasons.
Who gives a fuck
Is there a super charger for a ram 2500 V10 ?
Will this set up work for my 2016 Ram 2500 6.4L
I haven't tried this setup on a 2500, so I would check with ProCharger.
Not all ase certified entities know how to turn a wrench proper.
This is much easier than my c6 corvette was 😅
The music makes me feel like I'm watching 70s porn....
Blowmaster exhaust what a waste
10k Later...
No fkkn way that hemi is 400whp... Or a 150hp procharger.
350whp is more accurate.
395 crank hp is correct, he said under the hood
Yeah that Hemi produces 390 horsepower and 401 foot pounds of torque my dad got a 2011 Ram
Without a dynosheet, I call bullshiiiiit kid.
Its true my Chevy is over 400 stock then I programmed it now I'm almost 450 but the pro charger goes by the size they can go from 100 to 500 go easy but stock Turbos add a 100 or more hp
Haha. Guess you don't know how engines are rated. The horsepower isn't rated to the wheels rather just the output of the engine with accessories without being hooked to the transmission. So yes if you look at wheel HP those Hemis put out about 325hp.
Long tubes with a 6.1l intake from a junkyard would have really gave this a kick in the pants.
yeah, those 6.1's are all over the junkyards. are you serious?
@@caniwitech if you want one bad enough I'm sure you could find one. And yes, the eagle (6.1) intake manifold does better than the 392 intake on a 5.7l. Combining that with long tubes gives you a torque quicker and holds it longer. If you look a dyno results you may only gain 15 lb ft overall but you gain 35 to 50 lb ft the whole way to the max torque just from those 2. Basically it levels out your torque curve, it shoots way up at the beginning and then holds the line clear to the max torque instead of an actual curve. Hose power curve is helped but not like the torque. On one guys charger he put a used ebay 392 intake, with cam and tune, and he is dynoing over 400 hp and 430 torque to the ground. That car is faster than a 392 car. The 6.1 intake is better for that car.
@@sonsofliberty3081 I never said it wasn;t better, or that it didn't perform better. I just thought you saying simply picking one up from a junk yard a but of oversimplification. If someone was lucky enough to find a wrecked 6.1 in some random junkyard, there is no way the yard would sell just the intake. It would make selling the much more profitable engine much much harder. Most likely, your junkyard 6.1 intake is actually a 2500 buck craiglist intake with a free 6.1 attached to it.
Hi me and my son love the show. I'm an old school mechanic. I need some direction on a cam, lifters , pushrods. What type of tuner to get . For my son's first truck a 2004 Ram 1500 5.7 Hemi looking for a fast street truck. Any information anyone has that can help please send any information to jca1962c @gmail.com. thank you guys. Stay safe in
Either these guys have no clue as to whats "inexpensive" or they are slightly biased or, oh yes-they get this stuff for FREE!
You should have showed the pro charger running and the last 15 mins is product pushing. Not a great video.
Way to many commercials in one video. Junk station !
I was an Auto Mechanic for 18 years, before I decided to give it up, and if there is one thing I always noticed when young people started adding on all these bolt aftermarket products the vehicle would all of sudden come down with a bad case of what we used to call "Tinker IDUS " that's right teaker idus, that is a disease a car or truck get when you start adding on all these aftermarket parts, it may work good in beginning but then all of a sudden 6 months maybe a year things start going wrong, engine lights start appearing and you can't figure why, being in the business I have seen it all, and trust me when I say "Tinker IDUS once its in your engine bay it spreads, and then your local Mechanic like me have now figure out what the problem is. so my advice to anyone "LEAVE IT ALONE" if it aint broke don't fix it!!
"Rolls eyes"
What's 'teaker?' Do you mean 'tinker?'
@@ronjones-6977 yes meant Tinker. typo!
Can you put a pro charger on my truck
CARB will be gone soon thanks President Trump!
Why would you use a chambered muffler on a motor thats force inducted? You're wasting your money and not doing anything for the motor.
That's a waste of time.......
I camt watch stacy fuck david he dosnt do any of his own work like he says he does just like copperhead
God damn this guy sucks.
I am a level 3 Heavy Duty Diesel Mechanic in Ohio with automotive background. If you are a young man or young woman who wants to learn about this industry near me or anyone in the country message me I will gladly teach you
All the work and money for a junk Dodge. 🙄
Nick Crimi I would rather it on a Dodge hemi than any Ford junk.
60k miles sounds not junky to me. Feel free to enlighten us young kemosabe