ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
HOW TO: Fix an EO2 error | Lay-Z-Spa, Coleman Saluspa, BestWay Saluspa, Inflatable Spas
ฝัง
- เผยแพร่เมื่อ 26 ก.พ. 2022
- How to fix an EO2 error | Lay-Z-Spa, Coleman Saluspa, BestWay Saluspa, Inflatable Spas
The EO2 error can affect all Lay-Z-Spa, Coleman Saluspa, BestWay Saluspa, Inflatable Spas hot tubs
There are several causes which can be fixed quickly and easily.
Reason 1: Stopper Caps
Leaving the stopper caps on can cause an EO2 error when operating the pump.
Step 1: Remove the stopper caps
Step 2: Turn the pump off and at the power supply
Step 3: Restart the pump.
Reason 2: Dirty filter
A dirty water filter can cause water flow issues resulting in an EO2 error.
Step 1: Remove the filter housing
Step 2: Remove the filter
Step 3: Clean the filter using warm water
Step 4: Restart the pump.
Coleman SaluSpa: amzn.to/3i4iZIQ
We have had our for over 4 years and have absolutely loved it!
Pool&Spa Small Pool 1" Chlorinating Tablets
amzn.to/3qRhja2
As an Amazon Associate I earn from qualifying purchases.
#colemanspa #layzspa #bestwaysaluspa #familydiy #colemansaluspa #e02error
How to fix an EO2 error | Lay-Z-Spa, Coleman Saluspa, BestWay Saluspa, Inflatable Spas
The EO2 error can affect all Lay-Z-Spa, Coleman Saluspa, BestWay Saluspa, Inflatable Spas hot tubs
There are several causes which can be fixed quickly and easily.
Reason 1: Stopper Caps
Leaving the stopper caps on can cause an EO2 error when operating the pump.
Step 1: Remove the stopper caps
Step 2: Turn the pump off and at the power supply
Step 3: Restart the pump.
Reason 2: Dirty filter
A dirty water filter can cause water flow issues resulting in an EO2 error.
Step 1: Remove the filter housing
Step 2: Remove the filter
Step 3: Clean the filter using warm water
Step 4: Restart the pump.
Coleman SaluSpa: amzn.to/3i4iZIQ
We have had our for over 4 years and have absolutely loved it!
Pool&Spa Small Pool 1" Chlorinating Tablets
amzn.to/3qRhja2
As an Amazon Associate I earn from qualifying purchases.
#colemanspa #lay-z-spa #bestwaysaluspa #familydiy #colemansaluspa #e02error
When I hit the "bubble" button, to inflate the spa, nothing happens. Light is on, but no sound of a motor. I pushed the reset button on the side of the unit, but nothing is happening. Any ideas?
Hey you have a filter on the bottom inlet Aswell? What is the bottom inlet for?
@@JennJenn101 to let the water circulate......... OBVIOUSLY
Great information and much appreciated sir!!!
I did find that you do not have to take the hoses off, you could actually use your hose sprayer inside the spa and blow water through the pump through the filter port after removing filter. I was able to blow slimey debris out of mine the downside is it will go back into your spa nothing my vacuum wouldn't clean up and it isn't much debris.
I replaced my filter and that didn't work so I cleaned out the entire pump. Took it apart from the hot tub .. flushed it and I didn't see much sludge or debris come out. I refilled the hot tub and the e2 message comes on. As soon as I power on the pump. It does not begin to circulate when you turn on the heater button. It threw the e2 before I did anything at all. I've cleaned it out several times. I don't know what else the problem could be
Thanks for this! This little spa has quickly become the highlight of my evenings and I was able to get it working again quickly with your vid :)
Thank you. That fixed the problem. Appreciate you taking the time to make enjoying the hot tub much more fun.
Thank you so much. You saved me so much worrying about my hot tub. I put a clean filter and it works perfect. Thank you again.
you are welcome
I only had my spa a few days only used it twice. Did everything in this video nothing worked. After my own trouble shooting I found out that I had my filter cap screwed in to tight. Due diligence paid off I did not want to deal with customer service. Great vid. Any problems I have in the future I will be sure to come here first.
Thank you!! My spa was only three weeks old, so i didnt understand why that message was coming up. The filter was in fact dirty dirty!! Seems to be running much better.
thanks for the help! i bought a brand new one and we have very mineralized water because we live in the country! Had no idea how these worked and after a day of trying to heat it, it got stuck at like 84-86 and we were worried and confused!!! Found your video, cleaned it off, and hot tub is heating so much faster!!! THANKS TO YOU AND THE FAMILY! You are appreciated
This just happened to me with mine and I came across your video and it’s a great help
Great video and great advice! Thank you for posting!
Thanks you for the video and everyone taking time to share their experiences. Tonight was the first night I’ve had to get in the hot tub, went out during daylight and everything was great, got ready to get in and it threw this code. Changed extension cords thinking maybe the yard guys nicked it, but no go. Tomorrow when it’s daylight I will try these steps. Fingers crossed!
Did you ever get it worked out?
@@nkeely35 Yes! Changing the filter worked!
Had to spray water down the filter as I turned the pump on, finally worked. Thankyou Sir!
Glad I was able to help!
Thank you! Worked like a charm.
Thank you. Quick and to the point. Look forward to checking out your other videos.
You are most welcome!
Thank you! I’m a new owner to one of these and it scared me! I took the filter out and did exactly what you did! It’s working again! Hopefully it’s all good to go!
You are welcome. This error message is very common and you will probably get it a lot, but it never stopped me from enjoying it
THX KING! Saves my life😻😻 you’re the best!!!
Thank you so much for this video!
I agree! Iclean my filter every use. I just alternate between two filters, hosing one out and storing it for the next day. Mine is 3 1/2 years old and so easy to maintain with daily filter cleanings. When I’m not home I don’t have to change them daily bc I’m not using it and it stays clean. Thanks for your videos ;)
Thank you soo much!! Worked like a charm!
Also need to check minimum and maximum water lines - if not between those two marks, it could cause 02 error.
Perfect thanks man fixed in less then 5 mins you rock!!
Awesome. Glad to hear it!
Omg, thank you for the tip at the end! It's already raised 1° and it's only been 5 minutes🎉🎉🎉
One degree in 5 minutes! Did that continue at that speed???
Cleaning the filter doesn't work all the time. Even a new filter is not a guarantee. I've found that upon startup, an air bubble (in the pump, I believe) will throw an E-02 code. Taking both the filter and the chlorine/bromine tablet holder off and turning it back on for about 10 seconds pushes that air bubble right out. Then, just put the filter and tablet holder back on. Works every time for me.
Thank you for sharing! Great tip!
Thanks for the tip, removing those and running it is what fixed mine...
Thanks dude
I did that and it ran without giving the E2 error, but when I put them back on it happened right away again. I haven't tried a new filter yet but it's there any other reason for an E2??
@@drok3333 the filter holder itself can hold air bubbles as well. before attaching the filter holder again try tilting it all different directions while in the water to release trapped air. the best solution I've done is changing the filter underwater without bringing anything to surface... no chance for air pockets! or else you'll fight that e2 error every time you try to change it
This totally helped me thank you so much!! I bought my spa second hand so I didnt get any instructions etc with it. It’s been the best thing I’ve ever bought, it’s a Helsinki laz-y-spa with the exact same pump, and yesterday it started beeping with this error and I had no clue what it was or how to fix it 🤷🏼♀️. And my little 6 month old granddaughter LOVES her Nannie’s spa with the bubbles so I was so worried the pump was broken, but I’ve now just taken the filter off and it was filthy so I’ve put a new one in it and it’s working perfectly again!! I also didn’t know you’re supposed to clean it daily, so I’ll make sure I do this now too, because I honestly just love it sooooo much and want to make sure it stays working really well ☺️ Great video, so thank you!!! 🙏🏼🙏🏼🙏🏼
Just so you know you can go online and print the instruction booklet for your Spa using the manufacturer name and model name.
I did it & it worked like a Champ!
Changing the filter worked, thank you!
awesome! glad it worked
Thanks! Gonna go give it a try.
Great suggestions!
Very helpful! 🫶🏼🦋💜
Thank youuuu!!! ❤🎉
Yep it worked…i had a clean filter, but the bromine tablets were too packed in I guess..I rinsed the filter anyway and emptied the old bromine tablets..also ran the bubbler a minute..maybe it needed to burp? Anyway after trying five electrical plug ins to no avail, your video fixed it!
Thanks very helpful
Thanks you helped me alot
Thank you for the tip
Thank you so much
Big help, thank you
This is great thank you
Omg thank you was in my room watching tt and herd that beeping sound it was 2 am so the only one up was my dad we just got it thank you so much
Getting E02 with a new filter, so gonna try that hose thing tomorrow 👍
Thank you!!
Worked thanks!
Very helpful. Thank you
You are welcome
So we just got our spa about a month ago and I just got that error and it was beeping and I didn’t know what to do !! so thank you for your video!!!!
You are most welcome. It is one of the most common error codes.
thank you sir!
To all, every time you take the filter out, before reconnecting the filter housing, make sure you shake it under water to get all the air bubbles out of it.
Excellent point
Now THAT is something the instrucitons could include if they used words instead of cartoons! Thanks for the tip.
Love the dinosaur 🦕 noises in the background!
Roar!! 🤣
Yep that worked, great video
thanks!
Helpful thanks.
Thank you very much. Glad to help!
Thanks :)
Thanks
I had the E02 error on a brand new spa that had been running just 3 days. I initially thought it was a low water issue. Nope. Then I cleaned the filter - it was a little dirty, nothing like yours but it still gave an error. I verified it would start without the filter attached so I knew it was the filter. What I found was the rubber one way flaps inside the filter seemed slimy. So I hosed them off until they were squeaky clean and verified at sucking on the intake of the filter would open those flap values and let air through. After that I ran the pump without the filter and then slow screwed the filter on. This time it worked and water flows fine again.
Not 100% sure if cleaning the flaps worked - I see someone below mentioned an air bubble in the system could be the cause - but I think it didn't hurt.
There is a spa filter cleaner solution comes in a spray bottle really enhances the cleanup
Fixed it straight away but I just used a new filter I will save the other one and wash it when I have some time. Thanks
glad to help
⭐️⭐️⭐️⭐️⭐️ Thank you
Thanks :) It wasn't what you showed but I was able to find the issue while doing everything you said. The water wasn't going into the filter area because the flaps got stuck even after filter was cleaned. So I washed everything and changed the filter just for the hack if it cause we had 3 more. After washing the flaps, they were good again. Without this I couldn't have figured it out. My man though the pump broke lol and was ready to trash it. I don't throw away money, not even if it's a "cheap" hot tub. It was a cheap easy fast fix. Thanks again.
Glad the video was able to help and didn't end up throwing out a perfectly good spa
What do you mean by the flaps?
@@larrywatts8337 rubber flaps that let water through to the filter. If they are not clean, they stick and prevent water from getting in.
@@never_give_up90 how do you clean these flaps?
@@davidkillian8927 I used brush and mild soap.
Thabk you
Ugh. Thank you. Spraying a hose into the actual pump helped.
Glad to have been some help
Thanks!
You are welcome
Just a note to people in the country with the red clay everywhere... our water looks clear and beautiful, but this filter gets FULL of mineral and red dust EVERY DAY. YES EVERY DAY. It's not broken. Unplug it, clean it out well, shake out the air bubbles as you go to screw it back on, then plug it back in. Country life for ya.
Great thsnk yiuc😂
Question** our new spa seems to pull water into the heater in a way that fills up the tube, but the outlet tube pushing water back into the spa is only about half full. Is this an issue?
does anyone know the size of the in/out water fittings from the pump? I want to build a descaler for the pump to go to a bucket and want to connect the pump to the bucket of course.
Can you tell me where my Hydro jets and air jets will not run together on my brand new Santorini tub, thank you
Any chance chemicals could cause a flow problem with the filter? Mine was running fine and had cleaned the filter a few days prior. Added some pH up and E02 came on a little later. After resetting it a couple of times I cleaned the filter and it ran fine, then next day I added some shock and the E02 code again. Reset a couple of times then finally cleaned the filter again and it's running again. It's 7 degrees and snowing here so I'm panicked that it will freeze in the middle of the night. Thanks!
Is the control panel weatherproof? As in, does it need to be face down if it's raining, or can it be left in the upright position. Thanks!
May need to do the hose thing - new filter on and still giving us the EO2 error. so bummed!!
If my hot tub is low on water. Any it shuts off. It does shut off by its self right.
Thanks for the tip about using the hose to flush out the heater pump, my filters when I have the E02 code are cleaner coming out than yours going in, so it maybe not the filter at fault. Though to update this didn't work either, had same fault again today, getting fed up with this same fault every 24 hrs.
I have had to do that a couple of times. Really helps!
Another commenter says it could be an air bubble (I have the same issue with a clean filter like you):
Cleaning the filter doesn't work all the time. Even a new filter is not a guarantee. I've found that upon startup, an air bubble (in the pump, I believe) will throw an E-02 code. Taking both the filter and the chlorine/bromine tablet holder off and turning it back on for about 10 seconds pushes that air bubble right out. Then, just put the filter and tablet holder back on. Works every time for me.
same here !
This didn’t work for me. It works fine when I run just the bubble but As soon as I hit the filter or heater button I get the e02’code again. Any other ideas?
@Kittenwolf before connecting the filter to the spa give it a shake under the water to get air bubbles out.
Can you shoot water into all 3 of those connections on the pump? My heater stopped working after finding my kids ate eggs in the tub.
I have no heat and no errors. All sensors are good and so are the heaters any ideas?
Hello . My filter won't screw back on. I'm not sure why.
So in the past changing the filter hs worked.... I did that and pushed water through with my hose and still getting the error 2 code.... what should I do next????
My spa doing this , done everything you said but still not working, rest button doe#nt work , won’t turn on and off only at the plug, so criss only brought it br@nd new last year in summer sKe was only used a month then packed away fir winter
Where does one get the civers to put on the input and output valve openings inside tub if I need to disconnect pump? What are those parts actually called so I can order. Thanks in advance
Help! I've put the drain stoppers on both tubes to disconnect the pump. But the C pipe is 100% pouring water out, as though there is no cap on the inside. Can someone tell me what the problem is and how to fix this?
So wait? If I have a whole new motor, I don’t have to drain the tub?? I am trying to think if I have caps to inside fixings
Mine does that and won’t let me do the initial inflate on a new unit.
It was the filter for me. Once I changed it, the problem was solved. 😂
I have found the inflatable cover that come with the SPA does not do a very good job of keeping dirt and other small debris out the hot tube. I bought a durable weather proof tarp. to cover the inflatable cover. The inflatable cover is still needed to help trap the heat because the tarp is just to keep out derbre. A $50 - $100 weather proof tarp will keep the hot tub much cleaner and reduce pump issues.
Every time we get this code, I change the filter and it works no problem. This time I have changed the filter, I have disconnected the pump and I have flushed through all of the hoses and still get the code. When I press the jets it works fine but as soon as I press the heat or the filter button the code shows up again. Any tips? Thanks in advance.
Tried all these suggestions but still didn’t work I don’t even hear the pump running any other ideas? Thank u
Eo4 code now. I’ve fixed every other code.. now this one! Can’t clear it?
i went over the design of it and ended up drilling a hole in the plastic screw end for the filter housing. solved the continuous error.
Don’t expect your filter to work after that. Won’t filter when going through the screw hole. Bypasses it.
Just bought a GoPlus inflatable hot tub it was working for almost a week then it stopped and started Beeping & flash “HA” on the Screen I contacted them and they emailed me troubleshooting directions & I looked everything over and everything seems fine but the pump keeps beeping and flashing “HA” just don’t know what to do…. 🤦♂️
That's all fine and dandy but I am just trying to blow it up. Of course there's no water flowing so why this error code?
Thank you so much for this great video! Unrelated to the filter, I noticed that you had this hooked up to an extension cord. We did the same thing as the GFCI box won't fit in our recessed outlet fitting. Before I have anything rewired, have you had any issues with the extension cord? Do you recommend any special type? Thanks so much!
Sorry, I have no recommendations other than I am using a very long one I got from homedepot that I use for Christmas lights in December when my spa is off.
@@FamilyDIY perfect! Have you had any issue with that situation? Do you use any kind of waterproofing around the spa plug / extension cord connection?
I have replaced the filter and cleaned out the pump with a hose. It works for a few days and then E02 error happens again. I am beyond frustrated.
Has anyone found a heavy rain storm could cause the error code?? I keep unplugging and the code happens again and again. The tub is only 5 days old.
I have EO3 code. What's is that one?
We haven’t even set ours up yet, not blown up, but plugged it in to make sure the power wouldn’t trip a breaker. After we plug in, the heat and water button glow and then it throws this error. Any suggestions?
My guess would be that since there is no water, it is throwing the error only so the pump/Heater does burn up.
Mine throws the code only when I turn on the heat. Any suggestions?
Mine too, did you find any solution?
what happens if the filter doesnt even turn on at all then the E02 error comes on? Like it doesnt even attempt to start up? Is this more an electrical issue>?
I'm having this issue as well. I turn it on, I can hear a relay click, then it throws the error code.
Thank you for this video. We only just received ours this week. Could the filter be this dirty already?
Yea, the filter can get dirty pretty quickly depending on useage.
@Family DIY thank you for the fix! It was quick and easy. And yes, the filter was pretty dirty after only a week up and running. Now, to work on maintaining temperature...
Thanks!
I have a Saluspa S100105 which replacement filters do I purchase?
I think they are all the same. Try googling it.
do you have a video on how to fix the heating element? mine stopped heating above 95
Haven't had that problem yet so no.
Hi we have a new one.we have the eara come up befor we even blow the thing up iv tried reset both buttons can any one help as can not get it to go on
Try shooting water through the water inlet with a hose. There might be a blockage.
what is the plastic above the chem connect and filter at the top?
I’d like to know as well!
@@matthankins6074 Just a simple overflow for excess water. Nothing to do with any E0-2 error
Anyone has had the problem of the no air for spa effect??? help!
E05? Any ideas?
I've tried clearing the filter and water is moving like it should and it keeps giving me the Eo2 error could it be the temperature Guage
Our problem is we start the spa everything’s working the bubbles the heat etc. and then it turns off within 30 seconds to a minute do you know anything or any suggestions anything would help
I got this error the other day and replaced the filter to resolve the error code. However, now the heat does not work although I have water flow. Any thoughts?
Basic question: did you check that you turned the heat back on? I did this once. I only turned on the water pump but not the heater.