2011-2023 Chrysler 300/Dodge Charger 3.6L Spark Plugs Replacement How-To
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- This video will show you step by step on how to replace all six spark plugs in the 2011-2023 Chrysler 300 and Dodge Charger equipped with the 3.6L Pentastar engine. Spark plugs were purchased from Amazon listed below is a link to them I will also provide a link to the new intake gaskets as well.
NGK Spark Plugs 6pk: amzn.to/3JShQkA
Upper Intake Plenum Gaskets: amzn.to/3JNps7L
Anti-Seize: amzn.to/3FWe88r
Dielectric Grease: amzn.to/3TSoJH1
This was the best ‘how to’ video I’ve seen for this task.
Man, really appreciate the video. Just finished doing this on the wife's car. A shop quoted me $1,500-$1,600 😬 A trip to AutoZone, $330, and a few hours of my time and the job is done. It was actually a lot easier than I though even after watching the vid, I wasn't sure about taking off the intake, but follow this video step -step and it was pretty easy. Thank you again!
Just did my spark plugs with this video literally save me about 300 dollars 🙏🏼💪🏼 appreciate the video
Excellent tutorial... I'm an experienced mechanic, but hadn't done this particular task before. Your video and little insights made it a cake-walk! Thank you!
👍👍💪 than u very much for the video & your time, very educational .!!
A shop said for them to change two coils and 2 spark plugs and intake plenum gasket was going to be $1,349.65 I'm watching your video and I'm doing this myself autozone wants $303 for does parts but I found them in my boys auto part shop for $164 so wish me luck
You got this. It’s looks more intimidating than it really is.
Thank you bro soooooo much I did my Chrysler 300
perfect tutorial thank you
Great video - thanks
Just saw your other video I’m about to do my oil cooler. Might as well do the plugs while it’s all off Save some time
Great video man 💯
Thank you so much for the video! My charger is running like new! Only problem are those damn hose clips!
Thanks
Great walk through. I got my spark plugs changed however I’m getting a check engine light. Any tips?
Also did my thermostat with you. Fixed my overheating issue!
Thanks!
I appreciate the super thanks. 🙏
Help
Couldn’t get the bracket off stud was messing the nut and washer help?
Help
I grew up in a Chrysler products family and personally owned several when it was an American owned company, but I wouldn't now.
Ever since the Germans under Daimler Then Fiat under the Italian ownership the quality and reliability of their cars and trucks has declined and this video is a perfect example.
Notice all the cheap plastic clips that harden from the engine heat and become brittle and break when you try to disconnect them.
Notice all the garbage that must be disconnected from a V-6 rear drive north/south, not transverse mounted engine that should be easy to service spark plugs.
Add in the junky German made ZF 8-speed automatic that is constantly searching for gears, hard to service and expensive special ATF fluid along with having to buy a new pan with built in magnets and filter each time you service it.
And let us not forget it has no dipstick and you must get under the car as it is running to check the fluid level, a dangerous hazard.
Mark my word, Chrysler, now owned by a European auto conglomerate, Stellantis will be no more in a few years due to the ineptitude of European management that knows nothing about the American market.
Well said, couldn’t agree with you more. This is why many automakers under the stellantis name are always on the top 10 worst vehicles every year.
You recommend doing this outside I dont hsve a garage and they quoted me 800 for job. They have a garage and indont have a torque wrench.
You will have no problem doing this outside as for the torque wrench it is not required either just get the plugs snug you you’ll be good.
Hey did you disconnect the battery and which terminal did you disconnect ,Because I'm doing my car this week has a slight miss on cylinder#1 so figured let me just do a complete tune up.
I was being lazy and did not since the battery is in the trunk and my daughter had a bunch of stuff back there. But it’s always good practice to disconnect that way you don’t chance arching anything. You can just disconnect the negative terminal and you’ll be fine.
@@BLUECOLLARGARAGE Thank you sir you made the 3 video look so easy.Iam going to tackle the tuneup this week .👍
What happens if you don't place the plastic foam back over the plugs and coil pack?
Nothing you may just notice a little more noise under the hood it’s just a sound insulator.
I have no check engine but these last two days when I hit the gas the car shakes a bit can it be the spark plugs ?not on the gears only when I press the gas 130k miles haven’t replaced spark plugs I got it at 90k
I looked at mine and I have oil in there 😢
My car aint starting anymore now
Did it ever start? 🧐
@@marlosan4486 yes was something as lil as pressing the gas pedal when u turn it on