How to - Flash Eachine H8, H8S and Floureon H101 with an Acro Firmware!

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ต.ค. 2024

ความคิดเห็น • 30

  • @yoman8934
    @yoman8934 7 ปีที่แล้ว +2

    how did you bind it on the transis and can you bind the h8 to any 2.3 ghz transmitter

  • @MondwolfHA
    @MondwolfHA 4 ปีที่แล้ว

    Can i flash the firmware with align 3g fl760 USB Dongle sold with align 3gx ?

  • @nickodadon1328
    @nickodadon1328 7 ปีที่แล้ว

    have you started adjusting your PIDS?and if so can make a video showing what things you should play around with and the things to stay away from when flashing a h8 mini?

  • @MikevomMars
    @MikevomMars 7 ปีที่แล้ว

    How to change the PIDs and what PIDs are good ones?

  • @yosepwidianto
    @yosepwidianto 7 ปีที่แล้ว

    this working. thanks

  • @j.b.6203
    @j.b.6203 7 ปีที่แล้ว

    Hello nice video and good program.
    Would there be a way to intervene on the yaw and roll ?? If yes, how??
    Is there a possibility to sound a low battery alarm ?? thank you in advance

  • @j.b.6203
    @j.b.6203 7 ปีที่แล้ว

    Hello, I managed to blink once on a mini h8. I buy another and there is no way to flasher it and I do not know why? At the time of the flash, it marks an error and therefore does not depend on the download mode. It is very annoying, especially since it is a good product.
    Thank you if you have a solution to help me. When flashing it will mark no target connected

  • @abdulazizaziz442
    @abdulazizaziz442 7 ปีที่แล้ว

    hello can flash drone cheap dm002 with that software, because in dm002 hanve ground ,clk , data in the back. can you give me sugestion.

  • @trulsnygaard2161
    @trulsnygaard2161 8 ปีที่แล้ว

    hello, when you was switching rates, did you put this:
    hiratemulti 3.0f and hiratemultiyaw 3.0f
    is that what u did? help, thanks great video

  •  7 ปีที่แล้ว +3

    What's the name of that white connector/header at 6:06?

    • @Ripaltico
      @Ripaltico 7 ปีที่แล้ว

      Looks like any kind of JST connector.

  • @tarsrc7646
    @tarsrc7646 8 ปีที่แล้ว +1

    I bought the one from ebay, but did not receive the same cables as you did? I got brown, red, yellow and orange

    • @JaniPonkko
      @JaniPonkko 8 ปีที่แล้ว

      Colors do not matter. Just hook up the right pin to a right pin on the USB stick.

    • @tarsrc7646
      @tarsrc7646 8 ปีที่แล้ว

      oh thanks

  • @unrealinventor2006
    @unrealinventor2006 7 ปีที่แล้ว

    great job . I just do not see why you would put this much effort into doing this for a toy quad that is only going to last a little while.

  • @vhanafii4663
    @vhanafii4663 7 ปีที่แล้ว

    hii , h8 3d inverted and h8s its same motor and same firmware ?

  • @blackturbine
    @blackturbine 6 ปีที่แล้ว

    i try to flash but always get dowload failed Cortex-M3 help

  • @nickodadon1328
    @nickodadon1328 7 ปีที่แล้ว

    @11:32 where did you get that project file from?that where i get lost

  • @diegon2020
    @diegon2020 7 ปีที่แล้ว

    Does this apply to the eachine h8 3d?

  • @tearzrc4924
    @tearzrc4924 8 ปีที่แล้ว

    Hello. Did u buy the one from ebay? Thanks

    • @japalarc2506
      @japalarc2506  8 ปีที่แล้ว

      Yes, I have the Ebay one.

  • @bullit0076
    @bullit0076 8 ปีที่แล้ว

    I flash H8 Blue board right now but now i can make flips with the stock transmitter :(

  • @vadim107zaharchenko5
    @vadim107zaharchenko5 7 ปีที่แล้ว

    Good!!!

  • @oliverdpc3187
    @oliverdpc3187 7 ปีที่แล้ว

    Can you do with arduino nano?

  • @motkoloko
    @motkoloko 8 ปีที่แล้ว

    Can you do flips?

    • @japalarc2506
      @japalarc2506  8 ปีที่แล้ว

      That is the "whole point" on the acro firmware. The quad does not limit the movements at all, thus you can flip it as you wish. I tried to flip my H8 once inside the house but that ended up smashing the quad to the floor so I decided not to try it again for the video :) Doing flips etc. manually with line-of-sight with a quad this small is challenging to say the least. It makes more sense to flash the acro firmware if you are flying it with FPV as you can see better what corrections are needed etc. to make more controlled flips.

    • @alphhan
      @alphhan 6 ปีที่แล้ว

      H8S is capable of inverted flight. Can you fly inverted with this acro firmware? (If not, could you point us to a setup that is acro+inverted capable with a similar price?) Acro is cool by itself but inverted flight on top of acro capability would be much cooler.
      I imagine it should be possible to do that trick RC helicopters do. What's it called, the "metronome"?

  • @dimyata
    @dimyata 7 ปีที่แล้ว +1

    You can use batter props: www.banggood.com/5-PCS-HM830-RC-Paper-Plane-Blade-Replacement-p-916674.html?p=OB12033264223201512P

  • @MArgusChopinGyver
    @MArgusChopinGyver 7 ปีที่แล้ว

    it's still green board