I recently sold my 2020 Stinger gt-line running exactly the same Niche Gamma wheels for a 2022 Stinger Gt-Line with the 2.5t. Can't wait to put the wheels back on when winter is over. Had a Genesis Sedan V8 prior to my 2020 stinger, and my next car is going to be a GV70 when I get bored of the 2022 Stinger.
Came to your channel looking up mods for my G70 and noticed you sold it for a BMW. I’m in the same boat, I’m thinking of selling my G70 and would love a M2 or 2018 340i and tune that. They just sound and look so good, my G70 won’t get there. Don’t get me wrong, G70 Is awesome. I JB4 with intakes and plugs. Car moves but I miss the manual shifting.
I didn’t feel like rwd was the right platform for my goals and overall I was losing passion for the platform. I moved to the B58 bmw with a ZF8 transmission because it has significantly more aftermarket support. I wanted a 10 second daily and to achieve that in the G70 was becoming too expensive.
Velossa Tech was worth it for the looks alone, constant compliments. That product is more about decreasing air intake temps and increasing air volume. They don’t try to claim bs HP gains like most intake products.
Makes sense. Just curious If I need an extra person to help me remove the front bumper. How much time did it take to remove the bumper? Thanks for getting back to me so soon!🙂👍
Did you look into the Hyundai warranty to see if any of the performance mods voided it, in whole or in part? I like what you've done here and may do something similar with my 2020 G70.
JB4 is easily removable and a lot of the dealers don’t have the equipment to do a deep ECU dive to find it once removed. However, I wasn’t concerned about warranty in general. Dealerships will always find excuses not to honor warranties but legally have to prove your modification caused the issue at hand. The 3.3 is pretty bulletproof if taken care of, I wasn’t concerned about needing their help for an issue.
All the work was done by Gexhaust in south Florida. They had the tips in stock but they’re 3 inch double walled tips. The resonators are 2.5 inch vibrant resonators.
I live in around your area and I heard of Gexhaust as well. Did they do the mid pipe section for your exhaust? I usually go to Payless exhaust here in Hialeah FL.
@@TheAftermarket1 awesome sounds good! I’m going the same route you did and just purchased the Ark downpipes. Thanks for all the content and congrats on the new car. 🤜🏼🤛🏼
The finished product looked great! Did you have to remove the front grill etc to install the snorkels? Does going that route have any issues with driving in the rain? Mine is going to be my daily driver.
I tried on the new continentals and my best was a high 11. Similar power awd cars would have been low 11s. Part of the reason I moved into an awd platform with a more capable transmission 👀
@@coreyevans5408 i take delivery of the new car today and will be posting about it. But with a third of the mod money I spent on the G70s I can be mid 10s reliably. I would definitely do AWD on the G70 if you plan to modify it.
Myth. The B58 is not only cheap to modify, but cheap to maintain. Bigger market = cheaper parts. I spent thousands more to get 500whp on the G70 vs my M240i.
@@thirdeyecalm2994 I bought the car cash, I wasn’t worried about warranty. If you’re worried about warranty, you can’t afford to modify your car and you shouldn’t. The point is to buy a car that can take more power reliably, like the B58 in that bmw can. Then maintain your car properly.
Lol your install cost 🤣🤣. The only thing I'd pay for is the install on is for brand new tires on new 20" wheels ,because I don't have the machine to do it lol. Everything else this build would cost me a little over $5k very doable for the look!
Ha good luck spending $5k when the ECU & TCU alone is $4k. Besides the constant heat in Miami, I lived in an apartment building for a year during this build. Did as much wrenching as I could
@@TheAftermarket1 haha I'm also in an apartment but with a full garage so it doest make it much easier to get in deep with builds. Also did you do a full ecu flash or was it a piggyback?
I recently sold my 2020 Stinger gt-line running exactly the same Niche Gamma wheels for a 2022 Stinger Gt-Line with the 2.5t. Can't wait to put the wheels back on when winter is over. Had a Genesis Sedan V8 prior to my 2020 stinger, and my next car is going to be a GV70 when I get bored of the 2022 Stinger.
Damn that thing RIPS! Looks great!
with 500 bhp, what was your 0-60?
Came to your channel looking up mods for my G70 and noticed you sold it for a BMW. I’m in the same boat, I’m thinking of selling my G70 and would love a M2 or 2018 340i and tune that.
They just sound and look so good, my G70 won’t get there.
Don’t get me wrong, G70
Is awesome. I JB4 with intakes and plugs. Car moves but I miss the manual shifting.
If the g70 was Manuel would you keep it?
Interesting, I just sold my brand new M2 for a G70 haha
Sad to see it go... she's a beauty!
Thank you man! Hope you stick around for my next build 🙏🏻
@@TheAftermarket1 I guess it depends what it will be... any clues?
@@SlipAngleG70 there’s a clue in some of the other comments on this video 👀
can’t wait for the future of this channel!
So he got an M240i?
Why did you end up selling?
I didn’t feel like rwd was the right platform for my goals and overall I was losing passion for the platform. I moved to the B58 bmw with a ZF8 transmission because it has significantly more aftermarket support. I wanted a 10 second daily and to achieve that in the G70 was becoming too expensive.
Was it worth taking the front bumper off and adding the Velossa Big Mouth Snorkels? Did you notice any improvement on HP and how much?
Velossa Tech was worth it for the looks alone, constant compliments. That product is more about decreasing air intake temps and increasing air volume. They don’t try to claim bs HP gains like most intake products.
Makes sense. Just curious If I need an extra person to help me remove the front bumper. How much time did it take to remove the bumper? Thanks for getting back to me so soon!🙂👍
@@drumtimer maybe about 20-30 minutes. You don’t necessarily need two people but it would be helpful
Did you have any problems reinstalling the bumper and did everything align up?
@@drumtimer just be careful with the clips on each side of the bumper where it meets the side of the car
Did you look into the Hyundai warranty to see if any of the performance mods voided it, in whole or in part? I like what you've done here and may do something similar with my 2020 G70.
JB4 is easily removable and a lot of the dealers don’t have the equipment to do a deep ECU dive to find it once removed. However, I wasn’t concerned about warranty in general. Dealerships will always find excuses not to honor warranties but legally have to prove your modification caused the issue at hand. The 3.3 is pretty bulletproof if taken care of, I wasn’t concerned about needing their help for an issue.
Are these cars like reliable? I wanna trade in my 2.0T but I wanna make sure it don’t break down a lot lmao
Yes, way more reliable than the 2.0s. Easily the most robust motor in the KDM world right now
@@TheAftermarket1 sold me on reliable😂 are they expensive to maintain
Where did you get the exhaust tips and the mufflers delete with resonators?
All the work was done by Gexhaust in south Florida. They had the tips in stock but they’re 3 inch double walled tips. The resonators are 2.5 inch vibrant resonators.
I live in around your area and I heard of Gexhaust as well. Did they do the mid pipe section for your exhaust? I usually go to Payless exhaust here in Hialeah FL.
@@Roxas782 yes, they did everything custom. Except the ark downpipes, which they installed
@@TheAftermarket1 awesome sounds good! I’m going the same route you did and just purchased the Ark downpipes. Thanks for all the content and congrats on the new car. 🤜🏼🤛🏼
The finished product looked great! Did you have to remove the front grill etc to install the snorkels? Does going that route have any issues with driving in the rain? Mine is going to be my daily driver.
No issues with rain, front bumper does need to come off for the install
Undertrays are heat traps anyway
did you install the lap3? Im ready to get it but scared to install it myself lol
I did yeah, it’s really easy. You’re just swapping out the ecu.
You also used 20 MM Spacers correct?
how did you get your inspection with a muffler delete?
No inspection in FL, I had a full exhaust system.
Maybe I missed it but did you ever do a 0-60/ ¼ mile with dragy in the g70?
I tried on the new continentals and my best was a high 11. Similar power awd cars would have been low 11s. Part of the reason I moved into an awd platform with a more capable transmission 👀
@@TheAftermarket1 soehat are you getting now? And what was the 0-60
What*
@@TheAftermarket1 have a 2020 g70 rwd but stock and looking to trade for the 23 when they come out. Just not sure if I want rwd or awd
@@coreyevans5408 i take delivery of the new car today and will be posting about it. But with a third of the mod money I spent on the G70s I can be mid 10s reliably. I would definitely do AWD on the G70 if you plan to modify it.
what percentage tints do you have on the front/back/rear windows?
5% all around.
Oh, I didn’t tint the front though. Just to clarify
@@TheAftermarket1 right, just all 4 side windows and rear are 5%, correct?
@@tylerturner3281 yes sir!
What offset are your rims and did you need hub rings
19x8.5 +35MM front
19x9.5 +35 MM rear
Rears were perfectly flush, fronts need another 10mm spacer.
Mod a 2022 G80 sport pllllleaseee
BMWs are crazy expensive to maintain tho.
Myth. The B58 is not only cheap to modify, but cheap to maintain. Bigger market = cheaper parts. I spent thousands more to get 500whp on the G70 vs my M240i.
@@TheAftermarket1 what about the warranty on that bmw? If the warranty is voided on it you will have to pay a arm and leg for service..
@@thirdeyecalm2994 I bought the car cash, I wasn’t worried about warranty. If you’re worried about warranty, you can’t afford to modify your car and you shouldn’t. The point is to buy a car that can take more power reliably, like the B58 in that bmw can. Then maintain your car properly.
Lol your install cost 🤣🤣. The only thing I'd pay for is the install on is for brand new tires on new 20" wheels ,because I don't have the machine to do it lol. Everything else this build would cost me a little over $5k very doable for the look!
Ha good luck spending $5k when the ECU & TCU alone is $4k. Besides the constant heat in Miami, I lived in an apartment building for a year during this build. Did as much wrenching as I could
@@TheAftermarket1 haha I'm also in an apartment but with a full garage so it doest make it much easier to get in deep with builds. Also did you do a full ecu flash or was it a piggyback?
@@dudeman0762 I had both JB4 and Lap 3 under partial sponsorship.
@@dudeman0762 by the end jb4 was just there to manage the CPI