I have a 2024 ATAS - Manual with the 19" front wheel. In calling Motosport they mentioned their fender was for the 21" front wheel setup. Is your front wheel 19" or 21"? It looks like you have the same motorcycle and have the 19" front wheel setup. If 19" was this new white fender an exact match? Unbolt the old and install this one you purchased?
After purchasing this fender from MotoSport in Pearl White it is in fact an exact match of the 2024 Honda ATAS Blue Fender I removed. For all of you out there that plan on replacing your fender it is very easy. Jack up your bike, remove the left brake caliper, remove your front tire, remove 2 each Allen head bolts on both sides of your fender close to your axle, remove six screws holding your fender with a long philips screwdriver, pull the fender up and off. Replace in the same sequence and your are done. It took me less than an hour. 2021 and 2024 have the same fenders although difference color and Honda has both motorcycles as being Pearl White. Exact, Identical and Perfect replacement.
For the windscreen I went with the national cycle VStream N20068 midsize, made in USA. Works great on my 2023 ATAS. For the handguards: you can buy additional crash pads, at least here in Germany. That is what the hole is for. Tyres: Continental Trail Attack 3, 90/10 Tyre! Car Play: wireless adapter 60 € Amazon, no Headset needed.
This is awesome, and very similar to what I plan to do to mine when I pick it up next year. Quick question, do you plan to get radiator guards? Thanks for the video man.
Ive got a '24 ATAS as well. I am ditching the stock tires immediately for Motoz Rallz on the rear and Dual Venture on the front. Stock is worthless in sand, or water crossing in the national forest. Good highway tires, I'll hold onto mine in case I'm gonna be making any serious distance trips in the future. Check our Fuel Exhaust for good mufflers on this bike. The Diablo in their stainless finish looks like a standard option part, and actually gives you more room under where the pannier racks and luggage mount. With the DB killer in on their mini series, it sounds like the stock muffler with the baffles removed. Good rumble, not overbearing. Stock seat is terrible. Too soft, you're sitting in the seat pan plastic after 3 hours and it hurts. Touratech was my go-to, no complaints.
Oxford also makes the M1R micro and M2R mini tank bag that works well, magnetic attachment on both. Will let you hit full-lock left and right without interference. I'm using the M1R right now, just enough room for ear plugs, an S24 ultra and a wallet. I'm waiting on the OEM Honda tank bag (part number 08L85-MKS-E00) to get in stock though, as the Oxford bags soak through in the rain pretty much instantly, and are a touch small.
Hi, thanks for your videos. Me too, i bought the Glare Pearl White front fender cover. Just trying to figure out how to install it… Do you have to remove the wheel, to remove the front fender… !?!?! Any tips would be welcome! Best regards from Montreal!
Perfect ‚ I am interested which windshield will be your final choice? Because I 💯 agree to what you say about the wind coming through. Please let me know. Thx. 😊
This is a great buildup, based on your well-earned expertise. I don't understand why you need a quick shifter when you have the DCT (?). Do you use this feature when you're in manual shift mode?
I have a 2024 ATAS - Manual with the 19" front wheel. In calling Motosport they mentioned their fender was for the 21" front wheel setup. Is your front wheel 19" or 21"? If 19" was this new white fender an exact match?
Have a 2024 Honda ATAS ES DCT. Bikes fine but am unimpressed with Honda as a brand. Not updating OEM parts to fit new models is ridiculous. Tank pads, wind deflectors, fog lights, etc. Nothing fits the 24s or now, the 25s.
If it was the lower trim red paint on the standard, they would pop more for sure. I think it's fitting though with the 80's paint scheme, and it works well aesthetically.
Sorry I had one thing wrong, the front fender is $100 www.motosport.com/oem-parts/part-number/61110-MKS-EA0ZB
Hi AU, a mini video explaining how to swap the front fender cover would be very appreciated! Thanks; best regards from Montreal!
Yeah, I almost left a comment about that.
Still getting it. It looks SO MUCH better than the blue.
I'm sure Honda knows that.
I have a 2024 ATAS - Manual with the 19" front wheel. In calling Motosport they mentioned their fender was for the 21" front wheel setup. Is your front wheel 19" or 21"? It looks like you have the same motorcycle and have the 19" front wheel setup. If 19" was this new white fender an exact match? Unbolt the old and install this one you purchased?
After purchasing this fender from MotoSport in Pearl White it is in fact an exact match of the 2024 Honda ATAS Blue Fender I removed. For all of you out there that plan on replacing your fender it is very easy. Jack up your bike, remove the left brake caliper, remove your front tire, remove 2 each Allen head bolts on both sides of your fender close to your axle, remove six screws holding your fender with a long philips screwdriver, pull the fender up and off. Replace in the same sequence and your are done. It took me less than an hour. 2021 and 2024 have the same fenders although difference color and Honda has both motorcycles as being Pearl White. Exact, Identical and Perfect replacement.
@@WalksTall64thanks a lot for that great response and feedback 👌🏼
For the windscreen I went with the national cycle VStream N20068 midsize, made in USA. Works great on my 2023 ATAS. For the handguards: you can buy additional crash pads, at least here in Germany. That is what the hole is for. Tyres: Continental Trail Attack 3, 90/10 Tyre! Car Play: wireless adapter 60 € Amazon, no Headset needed.
This is awesome, and very similar to what I plan to do to mine when I pick it up next year. Quick question, do you plan to get radiator guards? Thanks for the video man.
That is quite a tech set up.
Really fan, nice.
Ive got a '24 ATAS as well. I am ditching the stock tires immediately for Motoz Rallz on the rear and Dual Venture on the front. Stock is worthless in sand, or water crossing in the national forest. Good highway tires, I'll hold onto mine in case I'm gonna be making any serious distance trips in the future.
Check our Fuel Exhaust for good mufflers on this bike. The Diablo in their stainless finish looks like a standard option part, and actually gives you more room under where the pannier racks and luggage mount. With the DB killer in on their mini series, it sounds like the stock muffler with the baffles removed. Good rumble, not overbearing.
Stock seat is terrible. Too soft, you're sitting in the seat pan plastic after 3 hours and it hurts. Touratech was my go-to, no complaints.
Oxford also makes the M1R micro and M2R mini tank bag that works well, magnetic attachment on both. Will let you hit full-lock left and right without interference. I'm using the M1R right now, just enough room for ear plugs, an S24 ultra and a wallet.
I'm waiting on the OEM Honda tank bag (part number 08L85-MKS-E00) to get in stock though, as the Oxford bags soak through in the rain pretty much instantly, and are a touch small.
For tank pads and grips, check out Stomp Grips.
@@Bacon676 I had the stock honda tank bag as well, Great bag. Wish I kept it
Ah man I love the stock exhaust, has a great deep tone.
Hi, are the sw motech cases wider than your handlebar ? thx ;)
Nice bike,thks.
No center stand? Very handy for loading gear, or tire repair.
Hi Adventure Undone, please explain us how did you change the front fender cover…
Thanks for any tips!
Very nice but you definitely need a black metallic (possibly angular) skid plate 👍
@@micmav71 I agree
Where did you snag that front fender piece in white?
I had the price wrong www.motosport.com/oem-parts/part-number/61110-MKS-EA0ZB
@@adventureundoneYowza! Might have to sit and stink on that for a minute, I'll add that part number to my list though!
Never clicked on a video so fast lol
Where did you locate your mount for you bags, when i lookup the bags on SW Motech it says they do not fit the twin
What's the part number for the white front fender?
I had the price wrong www.motosport.com/oem-parts/part-number/61110-MKS-EA0ZB
@@adventureundone No worries. This wont be the next mod but I do like the white fender much better than the blue.
Hi, thanks for your videos. Me too, i bought the Glare Pearl White front fender cover. Just trying to figure out how to install it… Do you have to remove the wheel, to remove the front fender… !?!?! Any tips would be welcome!
Best regards from Montreal!
Perfect ‚ I am interested which windshield will be your final choice? Because I 💯 agree to what you say about the wind coming through. Please let me know. Thx. 😊
This is a great buildup, based on your well-earned expertise. I don't understand why you need a quick shifter when you have the DCT (?). Do you use this feature when you're in manual shift mode?
That bike does not have a DCT transmission. It's a manual.
I’d have to paint the fender!
I have a 2024 ATAS - Manual with the 19" front wheel. In calling Motosport they mentioned their fender was for the 21" front wheel setup. Is your front wheel 19" or 21"? If 19" was this new white fender an exact match?
You don’t need a head set connected to have the OEM car play on line (there’s a cheat)……..and a $50 dongle eliminates the need for a cable 🤷♂️
How
Have a 2024 Honda ATAS ES DCT. Bikes fine but am unimpressed with Honda as a brand. Not updating OEM parts to fit new models is ridiculous. Tank pads, wind deflectors, fog lights, etc. Nothing fits the 24s or now, the 25s.
Great bike, but too much technology for me. I got a 2017 and that’s borderline too much tech.
Only $45 for the fender? Sign me up
You got a link to where I can purchase?
I had the price wrong, sry. www.motosport.com/oem-parts/part-number/61110-MKS-EA0ZB
Thank you so much!
Those gold wheels ruin the whole bike imo
If it was the lower trim red paint on the standard, they would pop more for sure. I think it's fitting though with the 80's paint scheme, and it works well aesthetically.
@@Bacon676 not when they don't match the forks an bars
Red color scheme looks good, white is just meh. I'm not a fan of how the bike looks. For me it was 300 mile range and the dct.