Wow….. great tip, and great instruction, it was always a pain in the ass to reinstall those springs correctly, and now you made it so easy! Thank you very much! AAAAA+++++.
One guy on TH-cam sold his 597 because he had too much trouble with putting the springs on the rods. He should have seen your video first!! OUTSTANDING! Now I know I am going to love mine.
Great video. I bought a 597 two weeks ago and took it to the range today. I have watched several videos on the reassembly of the rifle and the guide rod and spring reinstallation is the step that seems to cause the most trouble. I used your tip on placing the cardboard pieces on both sides of the receiver and it worked perfectly. Thanks for the tip.
Nice job, well done video and to the point. The tip about backing-off of the rod/spring set screw is a good point and prevents problems with ejecting and the tip on the cardboard on the sides of the bolt is also a great tip.
Pretty darn good at showing how easy is to install the springs on the 597 bolt. And, it's short. No one else comes close to zeroing in on the one part of assembly that calls for direction.
Great video. I had to use thicker card board on one side. First go around the side that need a thicker piece and let spring past the stoping point in the bolt. So spring got wedged. Every thing went back together but bolt wouldn’t move. So I didn’t force it. Took apart slowly and spring was hung up even with taking guide rod out. Took out other side and then it came apart no problem. Used thicker card board which helped keep spring in place on bolt and had it together in a few minutes.
this is very similar to the way I reassembled mine the first time I had it stripped down. I'll use this method after I'm done with it tonight and I do my traditional cleaning. haven't shot it in several months so it should be blast
Wow….. great tip, and great instruction, it was always a pain in the ass to reinstall those springs correctly, and now you made it so easy! Thank you very much! AAAAA+++++.
One guy on TH-cam sold his 597 because he had too much trouble with putting the springs on the rods. He should have seen your video first!! OUTSTANDING! Now I know I am going to love mine.
Great video. I bought a 597 two weeks ago and took it to the range today. I have watched several videos on the reassembly of the rifle and the guide rod and spring reinstallation is the step that seems to cause the most trouble. I used your tip on placing the cardboard pieces on both sides of the receiver and it worked perfectly. Thanks for the tip.
Thank you so much!! It took me a long time to get them re-installed the first time I cleaned the gun, the second time I did not pull them out
was just about to sell my rifle because of the reassembly issues. Your video resolve my issues, thanks!!
Great idea. I've watched others on You Tube struggle for minutes trying to do this. You've made it "too" simple. Thanks!
Nice job, well done video and to the point. The tip about backing-off of the rod/spring set screw is a good point and prevents problems with ejecting and the tip on the cardboard on the sides of the bolt is also a great tip.
Pretty darn good at showing how easy is to install the springs on the 597 bolt. And, it's short. No one else comes close to zeroing in on the one part of assembly that calls for direction.
As a man with big hands you saved my life, thanks!
Great video. I had to use thicker card board on one side. First go around the side that need a thicker piece and let spring past the stoping point in the bolt. So spring got wedged. Every thing went back together but bolt wouldn’t move. So I didn’t force it. Took apart slowly and spring was hung up even with taking guide rod out. Took out other side and then it came apart no problem. Used thicker card board which helped keep spring in place on bolt and had it together in a few minutes.
Your video is still helping people thanks!
Good video and nice video quality! Thanks for posting on RFC also!
this is very similar to the way I reassembled mine the first time I had it stripped down.
I'll use this method after I'm done with it tonight and I do my traditional cleaning.
haven't shot it in several months so it should be blast
Wow! So nice, so easy thanks for the tip
mine has play in the trigger group and reciever is that normal it rattles if u move it or shake it
Folks, I just noticed the comments on this video from years ago. Thanks and my pleasure!
My rifle jammed. Took apart and the bolt has gouged to top side of the chamber. The bolt is jammed and won’t slide. Any suggestions? Thank you
I have a model 597 in 22 magnum. Each guide rod has two springs on them.
😊 thank you!
Кто подскажет где можно купить запчасти для Ремингтон 597
cool =)
Gr8 video 👍