You sure about the compression? My 393 with flat tops, 3.850 stroke and 59cc chamber is really close to 12-1. It made 626hp on a Superflow without the vacuum pump. I know the pistons are dished, but they sure didn’t look that big. Maybe the heads have large chambers though.
Never heard of mixing 2 different bearing sizes to shrink the hole up. Seems like it would leave a lip. I’m not an engine builder tho. I do have a couple sbf engines. Both 427 one dart one world products block. One w trickflow 240 heads and the other with sc1 heads/Yates. Got a tremec behind the trick flow headed motor in a 93 coupe, badass. Power glide behind the sc1 motor in 88 gt, very much badass! Love the fords man
Very interesting video, Kyle...Nice to see Tyler...Always fun to see Steve stop by to prod you a little...You will definitely be the future Morris Racing engine guy...Great crew in the shop...Fun to watch the interaction
YESSSS I agree the way Kyle lays everything out in mechanical succession gives my OCD a chubby. It literally keeps my heart rate at its normal rpm. Which allows me to work comfortably.
Tremec 6 speed is hard to beat, Jay Lenos favorite,LOL Bed sides couple spot welds and make some struts and you can pull the whole side 3-4 inches and really looks cool when dumped over the tires.
Always wanted a Frankenstein motor to put in my little ranger! Maybe, one day! Cool to see the ol windsor getting put to good use! I guess 525hp and 465ft/lbs of torque!
I highly recommend the Modshop Metalwerks weld in roll pan. It fits perfectly. I installed one on my 2007 Ranger. It has the proper contour for the curved back end of this generation of Ranger.
11.25.01 compression 582 / 459 Torque Built one Cid 408 Windsor one really close to what yours is Cam 597 lift 308 Direction Mine was E85, Carburer 850 cfm. 36 timing
When you were checking that SBF crank on the balance machine, reminded me of when I placed an incorrect flywheel on my 351 Cleveland. Found out quick it was incorrect; by RPM'ing a little above idle. Back then, simply ran to my usual Ford parts dealer, ordered the correct flywheel. What a; (only Ford), learning moment. Blast to watch here, this classic being built by you.
Great video. All the factory 351W engines were 28oz balance. For 302 engines, they can be either 28oz or 50oz balance. All 302s were also 280z balance, until Ford changed them to 50oz balance in approx. 1981; crankshaft change. The two balances cause some major confusion/vibration problems, if parts get mix-matched. Some aftermarket parts (flywheels, harmonic balancers) for the SBF have changeable weights for both 28oz and 50oz balance. I am going to guess 487hp & 485 torque. If 9.1:1, needs more compression.
Dude! Definitely keeps us in the loop with this one! I've been very recently debating what to do with my Vortech blown Foxbody Crushstang since a large tree fell on it and have been considering a Ranger as a transplant recipient. Your video just may have pushed me in that direction! I have so many questions and I will be following along for sure!
When you torque something, you should hit it twice! With two bolts, you should hit the first bolt then the second bolt then back to the first, then the second bolt Love the content!
Jimmy dale for the nitrous ! Set it up with a fogger and it will hold A 400 shot easy progressive .06 then ramp inn 25% then hold 80 % though out the entire run ! And yes this has been done one to many time inn Texas !
The Morris shop needs some crane coverage. Half to 1 ton would be a great plenty. Longer crane bays to help with staging those blocks. Fork trucks take two people and are more prone to “woops” accidents.
Man I didn't even know you had a older brother Kyle, that's awesome me and my older brother are like best friends even though I'm in Florida and he's back in California! Love the family content. And me and my brother are hard core Ford guys haha
15:38 An external counterweighted balancer ABSOLUTELY has to be completely installed in this process, since that "imbalance" will have a much greater effect being farther away from the crankshaft counterweight.
I have a 2023 Ford Maverick that has all forged internals from the Focus ST and AWD and it's grey on black wheels (like the ranger) and my goal is to make a little street truck as well. A LOT less fabrication, but bolt on's. I'm excited to see what you guys do, because I don't have a clue what to do to trucks...
I wouldn't use the HV pump, standard pump is more than enough. cant wait to see it in the truck and what headers you will use and clearance for the oil filter. keep up the good work. 545 hp
When I built my mustang a couple yrs ago 347 stroker mine was a aod auto n I changed it to a tremic tko 5 speed n updated the sycros in it ran good oil n additive n man let it ripped on the road first with a c4 then changed it back to manual with the TKO N man I had a lot of fun. Mine was original auto built a T5 n never had problems with it, used the black cobra gears n carbon fiber syncs n short throw shifter n it was fun, but man with that built 347 n that tko it was even better, always speed shifted n they are easy to go thru also imo. I'm building a 408 or 410 right now but looking for a block for it. I have a nice 74 block but will need bored out. But would rather have a after market one, cause I'm using a built novi 2000 charger n going all out on heads n all. Also goin blow thru just for now n I'm not too familiar with blow thru, so it's goin to be a good lesson till I go holly or fuel tech 😂 . I have had plenty of friends with rangers built n they had fun with them. Love y'all videos n stuff n absolutely love learning new things you do, like machine work honestly learning a lot there. Thanks y'all n be careful, much love from Tennessee..
My understanding of a small block ford is there 28oz or 50oz balancers and on an internal balance crank you would remove the weight off the balancer as the ford Motorsport balancer you can remove the weight or even change between the two 🤔interesting seeing you guys check it and how it’s done ✅
So when you do two different halves of bearings how’s that work is it for oil flow Or how does that make the gap bigger? Something about circles I’m not understanding?
Kyle is a middle child.... the younger brother of someone who looks to be carved from wood, who one refers to as Sir, if not family or friend. The haircut screams Army Ranger. Kyle, it's time to start watching your caloric intake ;) (just kidding, I am a fat @ss....lol).
14:15 the way Kyle lays stuff out all geometrically and precise makes my OCD happy. Finally another perfectionist! You're the man Kyle! 😅
Love seeing family build projects... Pretty exciting to me a Ford ranger build!!!
A family that plays together , stays together !
That’s what we say in Arkansas😂.
Just kidding……😅
Nice! Add another Morris into the mix. Love the content Kyle keep it coming
408 sbf, 9:1 compression, Dart Pro1 heads, aggressive cam, super victor intake, on pump gas and MAYBE e85
Perfect for forced induction 9:1 is perfect for some nice turbos or a big kit and hopefully down the road it being a 4wd drag setup sbf.
I have 408 LS in my suburban
Why no boost? Nice little turbo for the win.
You sure about the compression? My 393 with flat tops, 3.850 stroke and 59cc chamber is really close to 12-1. It made 626hp on a Superflow without the vacuum pump. I know the pistons are dished, but they sure didn’t look that big. Maybe the heads have large chambers though.
Never heard of mixing 2 different bearing sizes to shrink the hole up. Seems like it would leave a lip. I’m not an engine builder tho. I do have a couple sbf engines. Both 427 one dart one world products block. One w trickflow 240 heads and the other with sc1 heads/Yates. Got a tremec behind the trick flow headed motor in a 93 coupe, badass. Power glide behind the sc1 motor in 88 gt, very much badass! Love the fords man
Awesome to see family come together.
506 hp 492 torque
Why so low torque
Nice to see your oldest son getting more involved.
His brother you mean. This is Kyles channel not Steves.
His father was filming.
Probably gonna see their sister sometime too. Steve said sugar momma is gonna be her car now because she wants to race
Glad to see you helping your brother guna be fun truck later
The Black Sheep of the family shows up. Ask me how I know, because I am the same guy in my family. Lol
Hehe. I spotted it too lol.
I got those vibes too 😂
Us black sheep’s can always tell
WERE THE BLACK SHEEP OF THE FAMILYYYYYYY great country song haha
my dad always said I was the black sheep of the family you in good company brother.
529 hp 408 tq ..great fun trans choice Tyler! Enjoy the build and the drive! Miles of smiles!
Why so low torque
So cool seeing the guys hanging out working on the Ranger!! Bring it on a drag and drive with us. !!!
Love this episode! Thanks for sharing!!
What’s up Kyle, that’s pretty cool of you helping your brother 👍
Thts awesome set up and for tht ranger beautiful engine I'm gonna say 478hp
519 HP/483 T is my guess. Fantastic vid Kyle. Hope the dyno run goes great for you and your brother, sweet looking truck!
Very interesting video, Kyle...Nice to see Tyler...Always fun to see Steve stop by to prod you a little...You will definitely be the future Morris Racing engine guy...Great crew in the shop...Fun to watch the interaction
YESSSS I agree the way Kyle lays everything out in mechanical succession gives my OCD a chubby. It literally keeps my heart rate at its normal rpm. Which allows me to work comfortably.
That boy looks a little like Paul Walker. Good looking son Steve and Kyle.
Tremec 6 speed is hard to beat, Jay Lenos favorite,LOL Bed sides couple spot welds and make some struts and you can pull the whole side 3-4 inches and really looks cool when dumped over the tires.
Always wanted a Frankenstein motor to put in my little ranger! Maybe, one day! Cool to see the ol windsor getting put to good use! I guess 525hp and 465ft/lbs of torque!
Love it. What really makes you all rich is you all stick together as family. GREAT WORK SME FAMILY
I highly recommend the Modshop Metalwerks weld in roll pan. It fits perfectly. I installed one on my 2007 Ranger. It has the proper contour for the curved back end of this generation of Ranger.
Thanks for the recommendation!
Well, get it to the Fab shop for a cage & a Fab 9! Huge potential here!
11.25.01 compression 582 / 459 Torque Built one Cid 408 Windsor one really close to what yours is Cam 597 lift 308 Direction Mine was E85, Carburer 850 cfm. 36 timing
508 hp, 525 tq. I want the wagon you painted keep the motor.lol 😊 great videos keep it up !
When you were checking that SBF crank on the balance machine, reminded me of when I placed an incorrect flywheel on my 351 Cleveland. Found out quick it was incorrect; by RPM'ing a little above idle. Back then, simply ran to my usual Ford parts dealer, ordered the correct flywheel. What a; (only Ford), learning moment. Blast to watch here, this classic being built by you.
Starting to watch kyle more than dad.. lol. Your the man..✌️
Great video. All the factory 351W engines were 28oz balance. For 302 engines, they can be either 28oz or 50oz balance. All 302s were also 280z balance, until Ford changed them to 50oz balance in approx. 1981; crankshaft change. The two balances cause some major confusion/vibration problems, if parts get mix-matched. Some aftermarket parts (flywheels, harmonic balancers) for the SBF have changeable weights for both 28oz and 50oz balance.
I am going to guess 487hp & 485 torque. If 9.1:1, needs more compression.
Thanks for the info! Good to know for future stock block builds
brings back memories, i had a '96. loved the truck hated the transmission.
Dude! Definitely keeps us in the loop with this one! I've been very recently debating what to do with my Vortech blown Foxbody Crushstang since a large tree fell on it and have been considering a Ranger as a transplant recipient. Your video just may have pushed me in that direction! I have so many questions and I will be following along for sure!
Good piston for a power adder
568hp and 504tq . I have faith in the Blue Oval !
@21:17 Steves face when you suggest spraying it, lmao
When you torque something, you should hit it twice! With two bolts, you should hit the first bolt then the second bolt then back to the first, then the second bolt Love the content!
Hail yeah I love an old shelf engine build can’t wait to see it on the dyno and in the truck it’s going to rip
'Say Why-And' has been on intakes when your dad was a kid 😉
When lifting with your back be sure to twist at the same time and hunch to one side👍🏻
@@baddaddy8718 you have to stretch out those ligaments 🫡
With the 460 you offset grind the cam and use a mopar rod and certain block, you end up with 500 and something cubic inches!
565 👍's up Kyle Morris thank you for sharing 🤗
450 HP / 470 FT.LBS 🤔 need a little spray to get over the hump. Love this project.👍
Why so low
Love to see all the ford guys in here lets goooooo. 1990 foxbody 347 gt40p heads and a votech v3 made 400hp 450 ft lbs i need better heads.
Way to take care of family.
Jimmy dale for the nitrous ! Set it up with a fogger and it will hold A 400 shot easy progressive .06 then ramp inn 25% then hold 80 % though out the entire run ! And yes this has been done one to many time inn Texas !
You're a good brother.... I did something similar for my big brother too.
I think its cool you are staying old school ford like your sn95 vs going LS or yote.
The Morris shop needs some crane coverage. Half to 1 ton would be a great plenty. Longer crane bays to help with staging those blocks.
Fork trucks take two people and are more prone to “woops” accidents.
For 40 years I thought it was wee-and ,what you can learn for the SMX boys 🇨🇦🇺🇲
Great content thanks for sharing
Nice build. 486 hp/ 460 tq
The lik bro makin a sweet motor for the big bro 👌. 545hp@6500rpm, 504lb/ft@4200rpm.
Hey Kyle - when or if do you use a rod bolt stretch gauge? - PS love the Wagon Paint Job 😎
T56 Magnum in there would be easy and gold power well, can always step up to the TKO.
Man I didn't even know you had a older brother Kyle, that's awesome me and my older brother are like best friends even though I'm in Florida and he's back in California! Love the family content. And me and my brother are hard core Ford guys haha
I recommend 11.5 compression pistons
YES! I need one of those for my Ranger! But my wife said no...😞
If that combination makes over 550 horsepower I want one
15:38 An external counterweighted balancer ABSOLUTELY has to be completely installed in this process, since that "imbalance" will have a much greater effect being farther away from the crankshaft counterweight.
Tremec TKX - holds 600#ft, compact and light. Shifts like butter.
Nice combo 485hp 450tq i think more cam and rpm needed to get 500+ hp or 150 shot nos.
I have a 2023 Ford Maverick that has all forged internals from the Focus ST and AWD and it's grey on black wheels (like the ranger) and my goal is to make a little street truck as well. A LOT less fabrication, but bolt on's. I'm excited to see what you guys do, because I don't have a clue what to do to trucks...
I wouldn't use the HV pump, standard pump is more than enough. cant wait to see it in the truck and what headers you will use and clearance for the oil filter. keep up the good work. 545 hp
When I built my mustang a couple yrs ago 347 stroker mine was a aod auto n I changed it to a tremic tko 5 speed n updated the sycros in it ran good oil n additive n man let it ripped on the road first with a c4 then changed it back to manual with the TKO N man I had a lot of fun. Mine was original auto built a T5 n never had problems with it, used the black cobra gears n carbon fiber syncs n short throw shifter n it was fun, but man with that built 347 n that tko it was even better, always speed shifted n they are easy to go thru also imo. I'm building a 408 or 410 right now but looking for a block for it. I have a nice 74 block but will need bored out. But would rather have a after market one, cause I'm using a built novi 2000 charger n going all out on heads n all. Also goin blow thru just for now n I'm not too familiar with blow thru, so it's goin to be a good lesson till I go holly or fuel tech 😂 . I have had plenty of friends with rangers built n they had fun with them. Love y'all videos n stuff n absolutely love learning new things you do, like machine work honestly learning a lot there. Thanks y'all n be careful, much love from Tennessee..
Also they make diff colored 5 speed speedo gears for what gear your wanting to use. Just thout I would add that in case you didn't kn buddy.
That little freeze plug on the oil crossover flows more oil if u install it upside down the way u have it flow is restricted
It'll make LOTS, 'cause that's what you guys do!
My understanding of a small block ford is there 28oz or 50oz balancers and on an internal balance crank you would remove the weight off the balancer as the ford Motorsport balancer you can remove the weight or even change between the two 🤔interesting seeing you guys check it and how it’s done ✅
546hp 439 tq
Nice to use up some old parts and give it to your brother
552hp /518tq . Regardless with the 5-speed, that thing is going to be a blast to drive on the street.
Flip it and you aced it
Love and appreciate the ford content!!
Great work (600 HP)
Tyler looks like he beat both of you two to 315!
BUILT ford TOUGH 👊🏽WITH "CHEVY" STUFF!!!
Love a v8 ford f’in ranger!!!!
Kyle keep it going great videos.
Nice. Love the channel. Keep up the good work
I remember steve driving this around lol.
CD009 is a decent box.
Nice to see ford engines
I’ve got a mild built 302 (heads cam intake) on pump gas. It’s on a megasquirt. Is 35deg too much total timing?
Thats family race crew 527hp 497 tq.
Greynger would be a cool name...
Awesome video again 👏...keep living the dream ✨️
Just found your guys channel . Great content in here . Curious on what color is on the ranger ?
525 hp @ 6200 520 torque @ 4900. With 32 degrees of timing on 91.
I think it should be entered into the danger ranger race!
So when you do two different halves of bearings how’s that work is it for oil flow Or how does that make the gap bigger? Something about circles I’m not understanding?
Super cool build!!
And a SBF powered!!!
Gonna be sick!!!
Great build Kyle!!
Where has brother been. In the military? In the can?? Living out of state. Rangers easy to adapt to whatever changes he wants.
Grey area, or Great Area depending.....?
Had no idea there was another Morris brother, neat. Are there any more Morris kids? I think Steve mentioned a daughter a long time back?
3 total...Tyler, Kyle & Katelyn 😊
I Always leave the Timing cover & water pump bare Aluminum, I don't like to paint Aluminum engine parts. I say 478HP.
Tyler looks so much like Steve well both of them really
Does Tyler work at Steve Morris engine
nice almost asmr on the end there
475HP & 425TQ GIMME - orange SM hat. 😃Cheers!
So is Tyler doing a hunting or fishing theme ? Gun rack !!!!!!!!
Kyle is a middle child.... the younger brother of someone who looks to be carved from wood, who one refers to as Sir, if not family or friend. The haircut screams Army Ranger. Kyle, it's time to start watching your caloric intake ;) (just kidding, I am a fat @ss....lol).
It’s going to make 440 hp on pump gas 😮
when in doubt turbo charge the crap out of it it's what your shop does best
510 first hit!
491 hp 546 ft lb. I don't recommend using a high- volume oil pump on a Ford Windsor block it will destroy the distributor gear.