System Wiring and Demonstration - RPS Kit Installation

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 มิ.ย. 2024
  • Part 4 of our installation series shows how sensors and solar panels attach to your RPS controller. We'll guide you through connecting all the wires, then demonstrate the kit's functionality including tank-full and well-low sensors.
    00:00 - Tank Full Sensor
    00:21 - Connecting Solar Panels
    01:15 - Controller Wiring
    01:41 - pump wire
    03:35 - low-well sensor
    04:30 - tank-full sensor
    05:20 - System Demonstration
    RPS Solar Well Pump kits: RPSsolarpumps.com
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 44

  • @user-ol8uw2nv7v
    @user-ol8uw2nv7v ปีที่แล้ว

    Thank you

  • @Newmanbay
    @Newmanbay 8 หลายเดือนก่อน

    Sir, am I going to attach 1 sensor to pump and the second to the tank and how to calculate the Dept

  • @radhakrishna34
    @radhakrishna34 2 ปีที่แล้ว +1

    Dear RPS, water level sensor looks like conductivity based, please consider it changing to float type. I had corrosion issues on conductivity based sensors. Float sensors are more reliable.

    • @RPSSolarPumps
      @RPSSolarPumps  2 ปีที่แล้ว

      Thanks for the feedback. We have used both and in the long term have found the stainless to be very reliable, since there is no mechanical switch to wear out or get stuck. But to each their own!

  • @RoeRoe123
    @RoeRoe123 2 ปีที่แล้ว

    RPS Solar could I use your setup to power my preexisting well pump? I'm not sure if mine is a 110V or 220V but will be checking it when I return to my farm.
    I'm pretty much talking about everything you sell above ground.
    Thank you for any reply. Enjoying the videos but as a beginner I'm lost.
    I need enough power to flip the well on maybe a couple of times a week.
    Any direction would be appreciated. Oh and if I remember correctly my well is approx. 4" around and it seems the water level started at 110 feet with 60 depth. Seems like it was 16 gpm's when it was dug 25 years ago.

    • @RPSSolarPumps
      @RPSSolarPumps  2 ปีที่แล้ว

      Yes, we can convert most 220V AC submersible pumps.

  • @jeffreythibert8060
    @jeffreythibert8060 2 ปีที่แล้ว

    what happens if I am pumping water from a well into a tank tank is full start using water from tank will pump start up to refill tank

  • @lionschannel.3822
    @lionschannel.3822 3 ปีที่แล้ว

    I wanted to know if the item used as low well sensor the same as the one used as the tank full sensor so that I can go and DIY. THANKS.

  • @abrahamballares3408
    @abrahamballares3408 2 ปีที่แล้ว

    Sir how much is the complete set of RPS solar pump

  • @raulcastro5770
    @raulcastro5770 3 ปีที่แล้ว

    When the sun goes down and the pump shuts off, does it turns on by it self the following day???

    • @RPSSolarPumps
      @RPSSolarPumps  3 ปีที่แล้ว

      Ours does, but I am not sure about your exact pump.

  • @animalsvlog983
    @animalsvlog983 3 ปีที่แล้ว

    Sir if the connection of the pump is exchange means wt hpns can u tell me exect connection of the pump to inverter

    • @RPSSolarPumps
      @RPSSolarPumps  3 ปีที่แล้ว +1

      Hmm this video is for our systems. Might need to check your manual for your specific pump!

  • @bangapisetimela7548
    @bangapisetimela7548 3 ปีที่แล้ว

    What if the light in the control panel light all of them and the water not coming what could be the problem

    • @RPSSolarPumps
      @RPSSolarPumps  3 ปีที่แล้ว

      Motor could be spinning backwards or you dont have enough power to get water to the surface.

  • @olusegunajiboye8631
    @olusegunajiboye8631 3 ปีที่แล้ว

    How can it be off if the full tank sensor is missing

    • @RPSSolarPumps
      @RPSSolarPumps  3 ปีที่แล้ว

      Tank full sensor is not required to operate as it is active open. The well low sensor is required as it is active closed, but can be overridden (not recommended) with a jumper wire.

  • @richardpayne9640
    @richardpayne9640 2 ปีที่แล้ว

    Does the controller need to be in a dry area?

    • @RPSSolarPumps
      @RPSSolarPumps  2 ปีที่แล้ว

      It is water resistant and designed for the outdoors. That being said, most people mount it below their solar panels for a bit of protection for the elements.

  • @nentechnologies5525
    @nentechnologies5525 4 หลายเดือนก่อน

    What is the hp of the motor sir? What is panel wattage?

  • @raulcastro5770
    @raulcastro5770 3 ปีที่แล้ว

    My pump has 4 wires... what is the 4th yellow wire for and where does it connects to?

    • @RPSSolarPumps
      @RPSSolarPumps  3 ปีที่แล้ว

      Sorry I am not familiar with your exact pump.

    • @raulcastro5770
      @raulcastro5770 3 ปีที่แล้ว

      Is a 2 horse power RPS pump.

    • @RPSSolarPumps
      @RPSSolarPumps  3 ปีที่แล้ว

      @@raulcastro5770 Do you have one of our pro series systems? If so, then it is a different controller and connection for the wires. That green wire would be the ground and can be connected to the plug using the diagram in the user manual. We can also walk you through it on the phone tomorrow if you like?

    • @raulcastro5770
      @raulcastro5770 3 ปีที่แล้ว

      I don't have the pumps with me but we can talk, I have a few questions. 703-582-6994.

  • @solidaritekadiamor
    @solidaritekadiamor 2 ปีที่แล้ว

    Comment avoir ce matériel pour un puits ?

  • @p.h.9907
    @p.h.9907 ปีที่แล้ว

    When the water is very calcareous, these level detectors present a conductivity fault. This is my case I had to use a more reliable system: the floats.

    • @RPSSolarPumps
      @RPSSolarPumps  ปีที่แล้ว

      Yes, in 99% of wells the sensors work for years without any issues. In the case of really high mineral content, sometimes we switch to floats.

  • @hassanabdulkadir703
    @hassanabdulkadir703 5 ปีที่แล้ว

    Plz Make water solar pump calculation need

    • @RPSSolarPumps
      @RPSSolarPumps  4 ปีที่แล้ว

      We have an easy to use sizing tool available at RPSsolarpumps.com

  • @anilmishra4855
    @anilmishra4855 4 ปีที่แล้ว

    Please. Give. Buy. Link. Also.

    • @RPSSolarPumps
      @RPSSolarPumps  4 ปีที่แล้ว

      Check us out at RPSsolarpumps.com

  • @anilmishra4855
    @anilmishra4855 4 ปีที่แล้ว

    It's. Flow. Look. Like. Very. Low. It. Can. Transfer. Water. From. Another. Tank. Not. Useful. In. Borewell. Pl. Reply

    • @RPSSolarPumps
      @RPSSolarPumps  4 ปีที่แล้ว

      That's just a demo to show how it works. These pumps are made to go underwater in a borehole!

    • @anilmishra4855
      @anilmishra4855 4 ปีที่แล้ว

      Please. Give. Buy. Link. I. Want. Buy.

  • @jeffsteele1295
    @jeffsteele1295 21 วันที่ผ่านมา

    That control panel I could build with less than $100 of parts or even less .

  • @parmeshwardongre8000
    @parmeshwardongre8000 4 ปีที่แล้ว

    Kimat Kay Aahe yachi