Does it allow AC power to power the pump when the DC power is not enough to pump water? Or you will switch off the DC power and switch on AC pump to water?
Hi, Nice video with indepth explanation. I would like to know if the AC source(gen/utility) must be 3 phase input or the device can convert single phase AC to 3 phase as most rural areas are limited to single phase utility.Thanks
4UPH750-45/9E Model (With 4 inch motor size, 750 watts, Maximum head = 45 meters, Maximum flow = 9,000 litres per hour) would give you the estimated 4m3/hr at a head of 30 meters, will cost you Ugx4,700,000
@@WeisEngineeringLtd i experience this problem and i always press the increasing button to restart the pump controller so what could be a problem in the ac/ dc controller
@@innocentlesole5878 It might be about the voltage, pump/controllers have minimum starting voltages or we may need to know the exact problem. Does it mean the pump doesn't start at all even if there is sufficient sunlight before you press the increasing button(in most cases, the increasing button increase speed if the controller is running)
My surface water pump 2hp ac 220v doesn't start at all and burn with Frecon vfd 4kw if there is sufficient sunlight and i don't why this happened ?and get err29 over current from Frecon drive but submersible pump stop and when sun shine start work.
My surface water pump 2hp ac 220v doesn't start at all and burn with Frecon vfd 4kw if there is no sufficient sunlight and i don't why this happened ?and get err29 over current from Frecon drive but submersible pump stop and when sun shine start work.
I want to see you one day. You have a best way explanation.
I am starting my to make a drill and need advice about installing solar panels and pump
I will be glad to meet you too.
Please can I use manual controller pumping switch to power the pumping machine when the automatic switch has fault
You can use manual controller on AC pumps
Does it allow AC power to power the pump when the DC power is not enough to pump water? Or you will switch off the DC power and switch on AC pump to water?
It can be switched to automatic switching
Can I use ac single phase motor connected to a solar pump inverter?
Yes, you can
If I want automatic solar water pump for livestock...what are the requirements
You may need float ball valves installed in the water troughs and a water level sensor in the tank.
Where do you connect the breaker
The controller has an overload protection feature so it can be connected before the controller
Where can i order or buy this? I need this for a pool pump that is about 500watts
You can oder from Weis Engineering Ltd online or by visiting our office in Wandegeya Kampala
@@WeisEngineeringLtd can you send me the link, thanks and it has to be ordered and shipped
We currently deliver within East Africa
What type of a pump is it
Grundfos CRN10-6 surface pump
@WeisEngineeringLtd keep up the good work and feeding us with some ideas
@@madalitsotyson8178 thank you sir
Hi, Nice video with indepth explanation. I would like to know if the AC source(gen/utility) must be 3 phase input or the device can convert single phase AC to 3 phase as most rural areas are limited to single phase utility.Thanks
Thank you.
The AC source is single phase, the device converts it to 3 phase in the demo video.
What brand is the controller
Hybsun
I need a hybrid pump that can pump around 4m3 per hour at head of 30mtrs..how much can in it cost, which model?
4UPH750-45/9E Model (With 4 inch motor size, 750 watts, Maximum head = 45 meters, Maximum flow = 9,000 litres per hour) would give you the estimated 4m3/hr at a head of 30 meters, will cost you Ugx4,700,000
Hi, I need a hybrid pump that pump around:
Hz 50 kW 1.1 HP 1.5
VOLTS 230 PH 1 S.F. 1
AMP 8.1 CAPACITOR 35 uF
What is the problems when the sunlight goes off and frequency goes down and fails to go up again
There will be some fault when the frequency fails to go up
@@WeisEngineeringLtd i experience this problem and i always press the increasing button to restart the pump controller so what could be a problem in the ac/ dc controller
@@innocentlesole5878 It might be about the voltage, pump/controllers have minimum starting voltages or we may need to know the exact problem. Does it mean the pump doesn't start at all even if there is sufficient sunlight before you press the increasing button(in most cases, the increasing button increase speed if the controller is running)
My surface water pump 2hp ac 220v doesn't start at all and burn with Frecon vfd 4kw if there is sufficient sunlight and i don't why this happened ?and get err29 over current from Frecon drive but submersible pump stop and when sun shine start work.
My surface water pump 2hp ac 220v doesn't start at all and burn with Frecon vfd 4kw if there is no sufficient sunlight and i don't why this happened ?and get err29 over current from Frecon drive but submersible pump stop and when sun shine start work.
Hi I need a pump that can pump around:
Hz 50 kW 1.1 HP 1.5
VOLTS 230 PH 1 S.F. 1
AMP 8.1 CAPACITOR 35 uF
I request to find if you're based in Uganda
Hi I need a pump that can pump around:
Hz 50 kW 1.1 HP 1.5
VOLTS 230 PH 1 S.F. 1
AMP 8.1 CAPACITOR 35 uF
Hello, where are you based. What is the required pump head and flow?