Wire Splicing for Solar Well Pump - RPS Kit Installation
ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2024
- Part 3 of our installation series demonstrates the proper methods to splice electrical wires for your Solar Well Pump or other DIY project.
RPS Solar Well Pump kits: rpssolarpumps.com - วิทยาศาสตร์และเทคโนโลยี
Excellent job all around, RPS. You're efforts are much appreciated.
Gregory, happy to help. Any questions about solar pumping?
ON my install the wires already had crimp on connectors on wires. The heat shrink wouldn't go over them. The crimp fittings were way to hard to crimp by hand. There were small pins in with the heat shrink pieces. Not sure what for.
Una pregunta que calibre de cable recomiendas. Para rps 800
What wire do you recommend for an rps 800
Can we use the wire on our 220V that's being replaced? Thx
Not with our standard systems, but our Pro like of solar pumps have automatic solar to AC transfer built in, so you can keep pumping at night or on cloudy days!
How much water flow do you have to have for this type system
3in pumps we can go up to 16 GPM. If we go to our 4in pump line we can do 150GPM+ but it also depends on the pumping head as well.
how much its going to cost me? for a 150 ft bore well?
Do you know the volume of water needed? We have a sizing tool at www.rpssolarpumps.com that can get you to the correct system.
What is the price for the complete set?
Depends on what you need! If you go to our website the online sizing form www.rpssolarpumps.com/ will giving you pricing and generally the size of solar pump required for your project, or just call us to confirm 8886374493
Eh, just use electrical tape
You can give it a shot, but if your electrical tape leaks you are looking at corrosion of your submerged splices. This heat shrink tubing has heat activated sealant inside and creates a nice tight seal around your splices when you shrink it down, to minimize water intrusion.