Best of luck with the repair! It's great that you're taking on the challenge yourself. If you need any tips or guidance along the way, feel free to ask. You got this! 🛠️💪
I understand the frustration of encountering issues right after purchasing a car. Here’s a detailed guide on how to replace the clutch slave cylinder on your 2006 Audi A3, especially when faced with the gearbox mount in the way. ### Tools and Materials Needed: - Jack and jack stands - Socket set (including extension bars) - Line wrench (for hydraulic fittings) - Screwdrivers - New clutch slave cylinder - Brake fluid - Drip pan - Hose clamp or pincher - Ratchet wrench - Torque wrench ### Steps for Replacing the Clutch Slave Cylinder: 1. **Preparation**: - **Park Safely**: Ensure the car is parked on a level surface with the parking brake engaged. - **Disconnect Battery**: Disconnect the negative terminal of the battery for safety. - **Lift the Vehicle**: Use a jack to lift the front of the car and secure it with jack stands. 2. **Support the Gearbox**: - **Support Gearbox**: Place a jack under the gearbox with a piece of wood to support it. This relieves pressure from the gearbox mount. - **Remove Gearbox Mount**: Carefully unbolt the gearbox mount and support brackets that obstruct access to the slave cylinder. 3. **Remove the Slave Cylinder**: - **Locate the Slave Cylinder**: Identify the clutch slave cylinder, which is typically mounted on the transmission. - **Disconnect Hydraulic Line**: Use a line wrench to loosen the hydraulic line from the slave cylinder to avoid damaging the fitting. - **Remove Slave Cylinder Bolts**: Unbolt the slave cylinder from the transmission. Carefully remove the old slave cylinder. 4. **Install the New Slave Cylinder**: - **Position New Cylinder**: Place the new clutch slave cylinder in position and secure it with bolts. - **Reconnect Hydraulic Line**: Reconnect and tighten the hydraulic line fitting to ensure there are no leaks. 5. **Reattach Gearbox Mount**: - **Reinstall Mount**: Carefully realign the gearbox mount and support brackets. Bolt them back into place securely. - **Ensure Proper Alignment**: Double-check the alignment and fastening of all components. 6. **Bleed the Clutch System**: - **Refill Brake Fluid**: Check and refill the brake fluid reservoir if needed. - **Bleed the System**: Have an assistant pump the clutch pedal several times and hold it down. Open the bleed valve on the slave cylinder to release air. Close the valve and repeat until only brake fluid escapes and the pedal feels firm. 7. **Final Checks**: - **Inspect for Leaks**: Check around the slave cylinder and hydraulic line for any signs of leaks. - **Lower the Vehicle**: Carefully remove the jack stands and lower the car. - **Reconnect Battery**: Reconnect the negative battery terminal. - **Test Clutch**: Start the car and test the clutch operation to ensure everything is functioning correctly. ### Tips: - **Use Quality Parts**: Ensure you use a high-quality replacement slave cylinder and other parts to avoid future issues. - **Double-Check Work**: Verify all connections and components are securely fastened before concluding the repair. - **Seek Help if Needed**: If you encounter difficulties or are unsure about any steps, consult a professional mechanic to ensure the job is done correctly. By following these steps, you can effectively replace the clutch slave cylinder on your Audi A3, even with the gearbox mount in the way. Good luck with your repair!
Hey! 😊 Thank you so much for the kind words! I'm really glad to hear that the step-by-step visuals are helpful for you. 🎥🔧 My goal is to make sure everything is clear and easy to follow, so it’s great to know it’s working! Thanks for watching, and feel free to reach out if you have any more questions or need help with anything. 👍🚗 #CarRepairTutorial #DIYMechanic #ThankYou
A lithuanian lady exploring Portugal in her VW Golf based small campervan .. had a similar clutch problem . the Portuguese garage mechanic in The Algarve replaced both the clutch slave cylinder and the Clutch master cylinder over the bank holiday last week ..
It sounds like the Lithuanian lady encountered some trouble with her VW Golf campervan's clutch while exploring Portugal. Fortunately, she managed to find a garage mechanic in the Algarve region who was able to help her, despite it being over a bank holiday. The mechanic replaced both the clutch slave cylinder and the clutch master cylinder, which are crucial components of the clutch system. This indicates that there was likely an issue with either one or both of these cylinders causing the clutch problem. Replacing these cylinders should hopefully resolve the issue and allow the Lithuanian lady to continue her exploration of Portugal without any further mechanical problems. It's always fortunate to find reliable help, especially when traveling in a foreign country
How long should this job take in a garage? I'm also interested in the cost of the job. I'm about to take my VW Touran in for this job, and I would appreciate any information. Thanks.
Hey! 😊 Thanks for reaching out! Replacing the clutch slave cylinder in a VW typically takes around 1-2hours in a garage, depending on the setup and whether any additional components need adjusting. As for the cost, it can vary based on location and labor rates, but generally, you’re looking at around £200-£300 for labor, plus the cost of parts, which can be around £50-£100 for the slave cylinder. It’s always a good idea to ask for a quote upfront to avoid any surprises. 👍 Good luck with your VW Touran, and feel free to reach out if you have more questions! 🚗🔧 #VWClutch #TouranRepair #CarMaintenance
If your car is leaking fluid from the clutch slave cylinder, replacing the clutch slave cylinder could definitely solve the problem, especially if the leak is coming from that part. The slave cylinder is responsible for hydraulic pressure in the clutch system, and when it leaks, it can cause issues like difficulty shifting gears or the clutch pedal feeling soft or sinking to the floor. Before you proceed, it’s a good idea to check whether the leak is specifically from the slave cylinder or if it’s coming from a different part of the hydraulic system (e.g., clutch master cylinder or a connecting line). If the leak is confirmed to be from the slave cylinder, replacing it should fix the issue. 🔧 Hope this helps, and let me know if you need more advice or tips! 🚗👍 #VWGolf #ClutchProblems #CarRepai
When replacing the clutch slave cylinder on a VW Golf, encountering the gearbox mount and support in the way can be a common issue. Here’s a step-by-step guide to address this problem: ### Tools and Materials Needed: - Jack and jack stands - Basic socket set (including extension bars) - Screwdrivers - New clutch slave cylinder - Brake fluid - Line wrench - Drip pan - Hose clamp or hose pincher ### Steps for Replacing the Clutch Slave Cylinder: 1. **Preparation**: - Park the car on a level surface and ensure the engine is cool. - Disconnect the negative battery terminal. - Lift the vehicle and secure it on jack stands. 2. **Access the Slave Cylinder**: - Remove the gearbox mount and support that obstruct the slave cylinder. This may involve: - Supporting the gearbox with a jack to relieve pressure on the mount. - Unbolting the gearbox mount using the appropriate socket. - Carefully removing the mount and any brackets in the way. 3. **Remove the Slave Cylinder**: - Locate the clutch slave cylinder, which is typically mounted on the transmission. - Use a line wrench to disconnect the hydraulic line from the slave cylinder to avoid rounding off the fitting. - Remove the bolts securing the slave cylinder to the transmission. - Carefully remove the slave cylinder, ensuring that you don’t spill brake fluid. 4. **Install the New Slave Cylinder**: - Position the new slave cylinder and secure it with bolts. - Reconnect the hydraulic line, ensuring it’s properly tightened to avoid leaks. - Reattach the gearbox mount and support. Ensure everything is aligned and securely fastened. 5. **Bleed the Clutch System**: - Refill the brake fluid reservoir if necessary. - Bleed the clutch system to remove any air. This can be done by: - Having an assistant press the clutch pedal several times and hold it down. - Opening the bleed valve on the slave cylinder to let air escape. - Closing the valve and repeating until only brake fluid is expelled and the pedal feels firm. 6. **Final Checks**: - Check for any leaks around the slave cylinder and hydraulic line. - Lower the vehicle and reconnect the battery terminal. - Test the clutch operation by starting the car and checking the clutch engagement. ### Tips: - **Safety First**: Always ensure the car is securely lifted and supported before working underneath. - **Use Proper Tools**: A line wrench is essential for hydraulic fittings to prevent damage. - **Check the Manual**: Refer to the vehicle’s service manual for specific torque settings and detailed instructions. By carefully following these steps, you can replace the clutch slave cylinder even with the gearbox mount and support in the way. If any step seems too challenging, consulting a professional mechanic is always a good idea.
I got the replacement slave cylinder from my local parts supplier, NAPA Motors. They usually have a good range of parts for most models, so it’s worth checking with them if you’re looking for something similar. 👍 Thanks for watching, and let me know if you need any more info! 🚗🔧 #SlaveCylinderReplacement #CarParts #NAPAMotors
😊 Thank you so much for your support and for being a part of our amazing community! It means the world to us. 🌟 If you’re interested in Sanu Motors branded items like T-shirts, caps, and more, check out our shop at sanumotors.stores. Don't forget to follow us on social media for the latest updates and exclusive deals: Facebook: facebook.com/sanumotors Instagram: instagram.com/sanumotors Twitter: twitter.com/sanumotors Thanks again for being part of our community! 🚗
If your slave cylinder is leaking when you bleed the clutch, and you suspect the seals might be the issue, it’s important to diagnose the problem accurately to avoid further damage. Here are some potential reasons why your slave cylinder could be leaking during the bleeding process: ### 1. **Worn or Damaged Seals:** - The most common cause of a leaking slave cylinder is worn or damaged seals. Over time, seals can degrade, leading to fluid leaks. If the seals are already compromised, bleeding the system could exacerbate the issue as the pressure forces fluid past the damaged seals. ### 2. **Improper Bleeding Procedure:** - Bleeding the clutch incorrectly can introduce air into the system or put excess pressure on the seals, causing leaks. Make sure you’re following the correct bleeding procedure: - Ensure that the clutch pedal is fully depressed before opening the bleed screw. - Close the bleed screw before releasing the pedal. - Repeat until there are no more air bubbles. ### 3. **Contaminated Brake Fluid:** - Contaminants in the brake fluid, such as dirt or old fluid, can damage the seals in the slave cylinder. Always use fresh, clean fluid when bleeding. ### 4. **Overextension of the Slave Cylinder:** - During the bleeding process, pressing the pedal too forcefully or with too much travel can overextend the slave cylinder, causing the seals to move past the smooth part of the bore and into the rough area, which can damage them. ### 5. **Incorrect Slave Cylinder Installation:** - If the slave cylinder was installed incorrectly or not aligned properly, the seals could be damaged during operation or bleeding. Double-check the installation to ensure everything is correctly seated and aligned. ### 6. **Cylinder Bore Damage:** - The inside of the slave cylinder could be scored or corroded, which can damage new seals quickly. Inspect the bore for any signs of wear or corrosion; if it's damaged, replacing the entire slave cylinder might be necessary. ### **Steps to Fix:** 1. **Inspect the Seals:** Remove the slave cylinder and inspect the seals for wear, cracks, or damage. Replace them if necessary. 2. **Clean the Cylinder Bore:** Clean the bore of the slave cylinder to remove any debris or contaminants that could damage new seals. 3. **Use the Correct Bleeding Procedure:** Follow the manufacturer's recommended bleeding process step-by-step to ensure no air remains in the system. 4. **Replace Fluid:** Use fresh brake fluid and ensure no contaminants enter the system. If the problem persists even after checking the above, it may be worth replacing the slave cylinder entirely, especially if it shows signs of significant wear or damage.
Installed clutch master cylinder and bled it but still the clutch went all way to the bottom and don't come up again, I will be buying slave cylinder and thanks you
It sounds like you're dealing with a frustrating issue with your clutch system. If the clutch pedal goes all the way to the floor and doesn't come back up, it often indicates a problem with either the master cylinder or the slave cylinder, as you suspect. Since you've already replaced and bled the clutch master cylinder, replacing the slave cylinder is a logical next step. However, before you do that, here are a few additional things you might want to check: 1. **Check for Leaks:** Inspect the entire clutch hydraulic system for any signs of fluid leaks. Even a small leak can cause the system to lose pressure, leading to the symptoms you're experiencing. 2. **Air in the System:** Even though you bled the system, it's possible that some air might still be trapped in the lines. Sometimes bleeding the system again or using a different method (like a vacuum or pressure bleeder) can help remove any remaining air. 3. **Clutch Pedal Return Spring:** Ensure that the clutch pedal return spring is intact and properly connected. If the spring is broken or disconnected, it could cause the pedal to stay on the floor. 4. **Fluid Level:** Double-check the clutch fluid reservoir to make sure it's full. Low fluid levels can cause the clutch to malfunction. 5. **Clutch Fork and Pivot:** Inspect the clutch fork and pivot point inside the bell housing. If either of these components is worn or damaged, they could be preventing the clutch from disengaging properly. Replacing the slave cylinder is a good next step, especially if the current one is old or shows signs of wear. After replacing it, be sure to bleed the system thoroughly again. Good luck with your repair! If you have any more questions or need further assistance, feel free to ask.
@@SanuMotorswithCharliei had similar problem today my clutch didnt work it goes down but dont come back and oil was low so i filled oil and with hand moved clutch front and back and it started working good again after 2 hours it happend again as time passes clutch loses its strenght and shifting speeds is getting more difficult
I just changed my clutch master cylinder after the clutch stuck to the floor. I got a pressure kit and tried to bleed the clutch system but there was nothing coming out of the slave cylinder bleeder nipple. Would this mean my slave cylinder is leaking and needs to be replaced? Thanks
It sounds like you may indeed have a leaking slave cylinder, especially if you're not getting any fluid coming out when trying to bleed the system. The lack of fluid could indicate a leak or blockage in the slave cylinder. It's a good idea to inspect the slave cylinder for any signs of leakage, such as fluid around the cylinder or on the ground beneath it. If you confirm that the slave cylinder is indeed leaking, replacing it should resolve the issue. Make sure to properly bleed the system after replacing the slave cylinder to ensure proper clutch operation. Good luck with your repair!
@@dman123guitarwas it the slave cylinder after? I’m having the same issue..recently changed my clutch and flywheel and since putting it back together the clutch is slipping. I’ve gone to bleed the system but nothing is coming from the slave cylinder nipple, although we pressurised the reservoir tank and made sure it was full off fluid.
I went over a bump on the highway in my 2016 MK7 Golf R 6-speed and the clutch pedal went to the floor when I shifted and stayed to the floor clutch is still engaged so I got it home what could it possibly be?
Thank you 🙏 I got that problem today. Clutch went completely down to the bottom. I’ll be replacing that part this weekend. Wish me luck.
Best of luck with the repair! It's great that you're taking on the challenge yourself. If you need any tips or guidance along the way, feel free to ask. You got this! 🛠️💪
Same haha. Just my luck I buy a 2006 audi a3 and it happens once I'm home so hopefully I can fix it pretty easy
I understand the frustration of encountering issues right after purchasing a car. Here’s a detailed guide on how to replace the clutch slave cylinder on your 2006 Audi A3, especially when faced with the gearbox mount in the way.
### Tools and Materials Needed:
- Jack and jack stands
- Socket set (including extension bars)
- Line wrench (for hydraulic fittings)
- Screwdrivers
- New clutch slave cylinder
- Brake fluid
- Drip pan
- Hose clamp or pincher
- Ratchet wrench
- Torque wrench
### Steps for Replacing the Clutch Slave Cylinder:
1. **Preparation**:
- **Park Safely**: Ensure the car is parked on a level surface with the parking brake engaged.
- **Disconnect Battery**: Disconnect the negative terminal of the battery for safety.
- **Lift the Vehicle**: Use a jack to lift the front of the car and secure it with jack stands.
2. **Support the Gearbox**:
- **Support Gearbox**: Place a jack under the gearbox with a piece of wood to support it. This relieves pressure from the gearbox mount.
- **Remove Gearbox Mount**: Carefully unbolt the gearbox mount and support brackets that obstruct access to the slave cylinder.
3. **Remove the Slave Cylinder**:
- **Locate the Slave Cylinder**: Identify the clutch slave cylinder, which is typically mounted on the transmission.
- **Disconnect Hydraulic Line**: Use a line wrench to loosen the hydraulic line from the slave cylinder to avoid damaging the fitting.
- **Remove Slave Cylinder Bolts**: Unbolt the slave cylinder from the transmission. Carefully remove the old slave cylinder.
4. **Install the New Slave Cylinder**:
- **Position New Cylinder**: Place the new clutch slave cylinder in position and secure it with bolts.
- **Reconnect Hydraulic Line**: Reconnect and tighten the hydraulic line fitting to ensure there are no leaks.
5. **Reattach Gearbox Mount**:
- **Reinstall Mount**: Carefully realign the gearbox mount and support brackets. Bolt them back into place securely.
- **Ensure Proper Alignment**: Double-check the alignment and fastening of all components.
6. **Bleed the Clutch System**:
- **Refill Brake Fluid**: Check and refill the brake fluid reservoir if needed.
- **Bleed the System**: Have an assistant pump the clutch pedal several times and hold it down. Open the bleed valve on the slave cylinder to release air. Close the valve and repeat until only brake fluid escapes and the pedal feels firm.
7. **Final Checks**:
- **Inspect for Leaks**: Check around the slave cylinder and hydraulic line for any signs of leaks.
- **Lower the Vehicle**: Carefully remove the jack stands and lower the car.
- **Reconnect Battery**: Reconnect the negative battery terminal.
- **Test Clutch**: Start the car and test the clutch operation to ensure everything is functioning correctly.
### Tips:
- **Use Quality Parts**: Ensure you use a high-quality replacement slave cylinder and other parts to avoid future issues.
- **Double-Check Work**: Verify all connections and components are securely fastened before concluding the repair.
- **Seek Help if Needed**: If you encounter difficulties or are unsure about any steps, consult a professional mechanic to ensure the job is done correctly.
By following these steps, you can effectively replace the clutch slave cylinder on your Audi A3, even with the gearbox mount in the way. Good luck with your repair!
I like the way you have actually shown in the camera exactly how, what and where the work or subject is done. Thank you.
Hey! 😊 Thank you so much for the kind words! I'm really glad to hear that the step-by-step visuals are helpful for you. 🎥🔧 My goal is to make sure everything is clear and easy to follow, so it’s great to know it’s working! Thanks for watching, and feel free to reach out if you have any more questions or need help with anything. 👍🚗 #CarRepairTutorial #DIYMechanic #ThankYou
A lithuanian lady exploring Portugal in her VW Golf based small campervan .. had a similar clutch problem . the Portuguese garage mechanic in The Algarve replaced both the clutch slave cylinder and the Clutch master cylinder over the bank holiday last week ..
It sounds like the Lithuanian lady encountered some trouble with her VW Golf campervan's clutch while exploring Portugal. Fortunately, she managed to find a garage mechanic in the Algarve region who was able to help her, despite it being over a bank holiday.
The mechanic replaced both the clutch slave cylinder and the clutch master cylinder, which are crucial components of the clutch system. This indicates that there was likely an issue with either one or both of these cylinders causing the clutch problem.
Replacing these cylinders should hopefully resolve the issue and allow the Lithuanian lady to continue her exploration of Portugal without any further mechanical problems. It's always fortunate to find reliable help, especially when traveling in a foreign country
Work well done!
Many many thanks
How long should this job take in a garage? I'm also interested in the cost of the job. I'm about to take my VW Touran in for this job, and I would appreciate any information. Thanks.
Hey! 😊 Thanks for reaching out! Replacing the clutch slave cylinder in a VW typically takes around 1-2hours in a garage, depending on the setup and whether any additional components need adjusting.
As for the cost, it can vary based on location and labor rates, but generally, you’re looking at around £200-£300 for labor, plus the cost of parts, which can be around £50-£100 for the slave cylinder. It’s always a good idea to ask for a quote upfront to avoid any surprises. 👍
Good luck with your VW Touran, and feel free to reach out if you have more questions! 🚗🔧 #VWClutch #TouranRepair #CarMaintenance
My car is leaking fluid from the clutch apparently, would this solve the problem I'm facing?
If your car is leaking fluid from the clutch slave cylinder, replacing the clutch slave cylinder could definitely solve the problem, especially if the leak is coming from that part. The slave cylinder is responsible for hydraulic pressure in the clutch system, and when it leaks, it can cause issues like difficulty shifting gears or the clutch pedal feeling soft or sinking to the floor.
Before you proceed, it’s a good idea to check whether the leak is specifically from the slave cylinder or if it’s coming from a different part of the hydraulic system (e.g., clutch master cylinder or a connecting line). If the leak is confirmed to be from the slave cylinder, replacing it should fix the issue. 🔧
Hope this helps, and let me know if you need more advice or tips! 🚗👍 #VWGolf #ClutchProblems #CarRepai
Great job!
Thank you
Typical, i would have the gearbox where theres a gearbox mount and support in the way of fully removing the slave. Thanks ❤
When replacing the clutch slave cylinder on a VW Golf, encountering the gearbox mount and support in the way can be a common issue. Here’s a step-by-step guide to address this problem:
### Tools and Materials Needed:
- Jack and jack stands
- Basic socket set (including extension bars)
- Screwdrivers
- New clutch slave cylinder
- Brake fluid
- Line wrench
- Drip pan
- Hose clamp or hose pincher
### Steps for Replacing the Clutch Slave Cylinder:
1. **Preparation**:
- Park the car on a level surface and ensure the engine is cool.
- Disconnect the negative battery terminal.
- Lift the vehicle and secure it on jack stands.
2. **Access the Slave Cylinder**:
- Remove the gearbox mount and support that obstruct the slave cylinder. This may involve:
- Supporting the gearbox with a jack to relieve pressure on the mount.
- Unbolting the gearbox mount using the appropriate socket.
- Carefully removing the mount and any brackets in the way.
3. **Remove the Slave Cylinder**:
- Locate the clutch slave cylinder, which is typically mounted on the transmission.
- Use a line wrench to disconnect the hydraulic line from the slave cylinder to avoid rounding off the fitting.
- Remove the bolts securing the slave cylinder to the transmission.
- Carefully remove the slave cylinder, ensuring that you don’t spill brake fluid.
4. **Install the New Slave Cylinder**:
- Position the new slave cylinder and secure it with bolts.
- Reconnect the hydraulic line, ensuring it’s properly tightened to avoid leaks.
- Reattach the gearbox mount and support. Ensure everything is aligned and securely fastened.
5. **Bleed the Clutch System**:
- Refill the brake fluid reservoir if necessary.
- Bleed the clutch system to remove any air. This can be done by:
- Having an assistant press the clutch pedal several times and hold it down.
- Opening the bleed valve on the slave cylinder to let air escape.
- Closing the valve and repeating until only brake fluid is expelled and the pedal feels firm.
6. **Final Checks**:
- Check for any leaks around the slave cylinder and hydraulic line.
- Lower the vehicle and reconnect the battery terminal.
- Test the clutch operation by starting the car and checking the clutch engagement.
### Tips:
- **Safety First**: Always ensure the car is securely lifted and supported before working underneath.
- **Use Proper Tools**: A line wrench is essential for hydraulic fittings to prevent damage.
- **Check the Manual**: Refer to the vehicle’s service manual for specific torque settings and detailed instructions.
By carefully following these steps, you can replace the clutch slave cylinder even with the gearbox mount and support in the way. If any step seems too challenging, consulting a professional mechanic is always a good idea.
where did you buy your replacement slave cylinder?
I got the replacement slave cylinder from my local parts supplier, NAPA Motors. They usually have a good range of parts for most models, so it’s worth checking with them if you’re looking for something similar. 👍
Thanks for watching, and let me know if you need any more info! 🚗🔧 #SlaveCylinderReplacement #CarParts #NAPAMotors
Is it necessary to fill slave cylinder with brake fluid before instaling it ?
yes you can, but its heard
Top job👍🏾
😊 Thank you so much for your support and for being a part of our amazing community! It means the world to us. 🌟
If you’re interested in Sanu Motors branded items like T-shirts, caps, and more, check out our shop at sanumotors.stores.
Don't forget to follow us on social media for the latest updates and exclusive deals:
Facebook: facebook.com/sanumotors
Instagram: instagram.com/sanumotors
Twitter: twitter.com/sanumotors
Thanks again for being part of our community! 🚗
THANK YOU SO MUCH!
Glad it helped!
Please help, my slave cylinder leaks when i bleed via clutch, i suspect my seals are short, could you please explain what could i be doing wrong
If your slave cylinder is leaking when you bleed the clutch, and you suspect the seals might be the issue, it’s important to diagnose the problem accurately to avoid further damage. Here are some potential reasons why your slave cylinder could be leaking during the bleeding process:
### 1. **Worn or Damaged Seals:**
- The most common cause of a leaking slave cylinder is worn or damaged seals. Over time, seals can degrade, leading to fluid leaks. If the seals are already compromised, bleeding the system could exacerbate the issue as the pressure forces fluid past the damaged seals.
### 2. **Improper Bleeding Procedure:**
- Bleeding the clutch incorrectly can introduce air into the system or put excess pressure on the seals, causing leaks. Make sure you’re following the correct bleeding procedure:
- Ensure that the clutch pedal is fully depressed before opening the bleed screw.
- Close the bleed screw before releasing the pedal.
- Repeat until there are no more air bubbles.
### 3. **Contaminated Brake Fluid:**
- Contaminants in the brake fluid, such as dirt or old fluid, can damage the seals in the slave cylinder. Always use fresh, clean fluid when bleeding.
### 4. **Overextension of the Slave Cylinder:**
- During the bleeding process, pressing the pedal too forcefully or with too much travel can overextend the slave cylinder, causing the seals to move past the smooth part of the bore and into the rough area, which can damage them.
### 5. **Incorrect Slave Cylinder Installation:**
- If the slave cylinder was installed incorrectly or not aligned properly, the seals could be damaged during operation or bleeding. Double-check the installation to ensure everything is correctly seated and aligned.
### 6. **Cylinder Bore Damage:**
- The inside of the slave cylinder could be scored or corroded, which can damage new seals quickly. Inspect the bore for any signs of wear or corrosion; if it's damaged, replacing the entire slave cylinder might be necessary.
### **Steps to Fix:**
1. **Inspect the Seals:** Remove the slave cylinder and inspect the seals for wear, cracks, or damage. Replace them if necessary.
2. **Clean the Cylinder Bore:** Clean the bore of the slave cylinder to remove any debris or contaminants that could damage new seals.
3. **Use the Correct Bleeding Procedure:** Follow the manufacturer's recommended bleeding process step-by-step to ensure no air remains in the system.
4. **Replace Fluid:** Use fresh brake fluid and ensure no contaminants enter the system.
If the problem persists even after checking the above, it may be worth replacing the slave cylinder entirely, especially if it shows signs of significant wear or damage.
Installed clutch master cylinder and bled it but still the clutch went all way to the bottom and don't come up again, I will be buying slave cylinder and thanks you
It sounds like you're dealing with a frustrating issue with your clutch system. If the clutch pedal goes all the way to the floor and doesn't come back up, it often indicates a problem with either the master cylinder or the slave cylinder, as you suspect. Since you've already replaced and bled the clutch master cylinder, replacing the slave cylinder is a logical next step.
However, before you do that, here are a few additional things you might want to check:
1. **Check for Leaks:** Inspect the entire clutch hydraulic system for any signs of fluid leaks. Even a small leak can cause the system to lose pressure, leading to the symptoms you're experiencing.
2. **Air in the System:** Even though you bled the system, it's possible that some air might still be trapped in the lines. Sometimes bleeding the system again or using a different method (like a vacuum or pressure bleeder) can help remove any remaining air.
3. **Clutch Pedal Return Spring:** Ensure that the clutch pedal return spring is intact and properly connected. If the spring is broken or disconnected, it could cause the pedal to stay on the floor.
4. **Fluid Level:** Double-check the clutch fluid reservoir to make sure it's full. Low fluid levels can cause the clutch to malfunction.
5. **Clutch Fork and Pivot:** Inspect the clutch fork and pivot point inside the bell housing. If either of these components is worn or damaged, they could be preventing the clutch from disengaging properly.
Replacing the slave cylinder is a good next step, especially if the current one is old or shows signs of wear. After replacing it, be sure to bleed the system thoroughly again.
Good luck with your repair! If you have any more questions or need further assistance, feel free to ask.
@@SanuMotorswithCharliei had similar problem today my clutch didnt work it goes down but dont come back and oil was low so i filled oil and with hand moved clutch front and back and it started working good again after 2 hours it happend again as time passes clutch loses its strenght and shifting speeds is getting more difficult
I just changed my clutch master cylinder after the clutch stuck to the floor. I got a pressure kit and tried to bleed the clutch system but there was nothing coming out of the slave cylinder bleeder nipple. Would this mean my slave cylinder is leaking and needs to be replaced? Thanks
It sounds like you may indeed have a leaking slave cylinder, especially if you're not getting any fluid coming out when trying to bleed the system. The lack of fluid could indicate a leak or blockage in the slave cylinder. It's a good idea to inspect the slave cylinder for any signs of leakage, such as fluid around the cylinder or on the ground beneath it. If you confirm that the slave cylinder is indeed leaking, replacing it should resolve the issue. Make sure to properly bleed the system after replacing the slave cylinder to ensure proper clutch operation. Good luck with your repair!
That's great man thanks got it sorted.
@@dman123guitar well done
@@dman123guitarwas it the slave cylinder after? I’m having the same issue..recently changed my clutch and flywheel and since putting it back together the clutch is slipping. I’ve gone to bleed the system but nothing is coming from the slave cylinder nipple, although we pressurised the reservoir tank and made sure it was full off fluid.
Hello I,m Eddie I also parked my golf because of diz problem
Really. Sorry for that. Big job
Thanks
It's Golf 6, right?
yes
is that the only way to bleed the system
Clutch has one nipple. Only that
Thank you
@@SanuMotorswithCharlie ok thank you for the respond
6:35 are you kidding? My eyes hurts! What a mess, you dont have some PVC pipe maaan?
im sorry wash your eyes with cool water
How much
need more details, please contact us +447551021029
Thank You
❤❤
Thank you
I went over a bump on the highway in my 2016 MK7 Golf R 6-speed and the clutch pedal went to the floor when I shifted and stayed to the floor clutch is still engaged so I got it home what could it possibly be?
@@ls6king316
Could be clutch