I just sold my 2017 R3 today and bought a 2018 Ninja 400 ABS, do yourself a favor and get the ninja 400. I rode both today and I'm so stoked on the 400
I also had the cb300f it's the slowest of them all (most beginner friendly though) the r3 was slightly faster, ninja 400 even faster. Moved on to the 2018 drz400sm now
What exhaust system for the ninja 400 sounds most like a 600? The yoshimura to me does but never heard it in real life and also the higher rpms of the yoshimura sound really bad on video, but I'm hoping it is just over video. Thanks.
It is really hard to get a parallel twin to sound like a i4. I would just pick an exhaust that you like the sound of . Parallel twins can sound really good. Check out the yamaha mt07 exhaust vids.
So if I was to deck my 400 out in your TST graphics kit, thus be riding around Maryland, and I do EVERYDAY and go out of state every week etc, I'm EVERYWHERE. Put 7,000 miles on her last yr. What would you charge me for the sticker fairing kit if you sell em? Would totally dress my bike in that. Le me know, thanks!
Which year ZX-6R? We currently do not offer a low mount for any new generation ZX-6R but we do sell them for the 2005-2006 model and the 2007-2008 model.
What gave you that idea? This project has been in the works for a better part of a year but at any given time we’re working on 3-5 bikes. Like right now, MT-09, CRF300L, R7…
@@mattbob666420 unfortunately, all of the cool parts take time to create. Especially from a company like us where we start from the ground up. Luckily, our fender eliminator is closer to being released than most people think. Just keep an eye out and updates will follow. We appreciate the patience and understanding.
@@mattbob666420 probably because taking videos of some engineers designing, prototyping and testing parts doesn't make for exciting video content, but that doesn't mean it's not happening behind the scenes. When Apple releases a new product they usually don't show anything until close to release day even if it might've been 1-2 years in the works.
We have heard reports of yes and no from end users. They definitely did change some components that are supposed to correct the issues. We still opt to install our external spring kitvon the bikes we build, if not for anything else but to make the clutch feel more "there."
We have not messed too much with tuning this bike too much just yet. Our other N400 that we have been using for racing sees the Dyno very often. At some point we will be tearing into this bike's tune as well but that has not happened yet.
@@TSTindustries goes beyond inexpensive, they're way too cheap for its superb quality and that's a very good thing making me a fan of your products. Only sucks cause of the overseas shipping tho but overall very nice!
@@rodmaiquez726 we are always looking for distributors and dealers in international market. Having a local outlet cuts down on those shipping costs. Hopefully we can offer that in your area sooner than later. We keep our parts inexpensive because we circumvent several expense adding things. We have a sophisticated design team and access to very good manufacturing technology. This means we can design and produce the parts ourselves, and then sell them directly to the customer. This approach cuts down on middlemen and the associated costs.
Legend has it he did the whole video on just one breath of air! This Ronald fella seems like he was born for this, he should do more videos like this!
Just make a massive WORX package with everything in this vid including the decals.
This is indeed a clean looking 400
Thanks. We call it Snow White
@@TSTindustries will this work on a 2022 model?
@@M447DT Absolutely.
It’s a beautiful bike. I have about 70% of the mods mentioned in this video on my 2022 ninja 650 krt and they are all 💯 perfect.
Thanks for the love and support!
P.S. Go Birds! - ML
Beautiful bike,bought my first bike about 3 weeks ago Ninja 400 2023.
Hey man I’m gonna get mine soon. How is it?
SHOUT OUT TO DON. HE IS MUCH MORE ENTERTAINING THEN MARK FROM THE GROM FIRST RIDE.
Don! Hahaha
8:15 the chain adjuster indicator / shaft protector is mounted backwards.
It makes no difference which way that is mounted as long as the opposite side matches direction, and is within range of indicating wheelbase ticks
Perfect bike
That livery is beautiful
Great job Ron!
plz make an install vid for the livery, just got one i want it perfect
Please make video of the race build ninja
I can't decide between a Ninja 400 or Yamaha R3, advice appreciated!
Ninja 400 will give you more low end grunt. You won't get tired of it as quickly as the r3 in my opinion
I just sold my 2017 R3 today and bought a 2018 Ninja 400 ABS, do yourself a favor and get the ninja 400. I rode both today and I'm so stoked on the 400
Ninja 400 is a class above the R3 in every category for me... way better bike. Not even comparable.
Always Ninja
I also had the cb300f it's the slowest of them all (most beginner friendly though) the r3 was slightly faster, ninja 400 even faster. Moved on to the 2018 drz400sm now
Great job, looks bad ass
What's the total cost for all of the upgrades seen in this video? I'm looking to buy a Ninja 400 as my first bike.
You can check out pricing on our website for all of those items but all-in, we're over $1.8k for what you see in this video.
@@TSTindustries Including the exhaust? Ya'll might see a large order from me later this year.
@@jnblawnandlandscapellc for real, killer price and killer mods
It's too great to be true
I’m getting a Ninja 400 as my first bike and I want these exact mods. Do you guys offer this package? I’ll go to your site as well. This is amazing.
@Ethan Anthony I just got my first bike today. A 2018 400 ninja. I want this whole package now as well haha.
What exhaust system for the ninja 400 sounds most like a 600? The yoshimura to me does but never heard it in real life and also the higher rpms of the yoshimura sound really bad on video, but I'm hoping it is just over video. Thanks.
It is really hard to get a parallel twin to sound like a i4. I would just pick an exhaust that you like the sound of . Parallel twins can sound really good. Check out the yamaha mt07 exhaust vids.
Is it legal to have the plate mounted low like that? If so I definitely want to purchase that same mount for my 23 ninja 650
You would have to check your local laws.
i want to purchas a liberty sticker kit
liverly
liberally
@@ronaldames7359 oh thanks yes. i like stickers what can i say 🤙
The hands make the video for me
So if I was to deck my 400 out in your TST graphics kit, thus be riding around Maryland, and I do EVERYDAY and go out of state every week etc, I'm EVERYWHERE. Put 7,000 miles on her last yr. What would you charge me for the sticker fairing kit if you sell em? Would totally dress my bike in that. Le me know, thanks!
You can see the information on this livery kit here: tstindustries.com/tst-race-livery-graphics-kit-kawasaki-ninja-400-2018.html
will the Elite-1 low mount fender eliminator work on a zx-6r? i love the low mount position
Which year ZX-6R? We currently do not offer a low mount for any new generation ZX-6R but we do sell them for the 2005-2006 model and the 2007-2008 model.
@@TSTindustries thank you, will you eventually make one? appreciate it
@@harryclark3388 if we get one back in house we can maybe you around with a few ideas.
@@TSTindustries i just got into riding, i have a 400 right now, but my next bike is definitely a zx6r i wouldn't mind letting you experiment on it lol
How does the adjustable lever work? For the clutch. Min max?
You can just watch our lever installation presentation for those answers. We have a video for that.
Glad to see you guys gave up on the MT-09...
What gave you that idea? This project has been in the works for a better part of a year but at any given time we’re working on 3-5 bikes. Like right now, MT-09, CRF300L, R7…
@@TSTindustries just from the videos you guys post. I'm sure I'm not the only one waiting for parts. Or should I say GOOD parts lol.
@@mattbob666420 unfortunately, all of the cool parts take time to create. Especially from a company like us where we start from the ground up. Luckily, our fender eliminator is closer to being released than most people think. Just keep an eye out and updates will follow. We appreciate the patience and understanding.
@@mattbob666420 probably because taking videos of some engineers designing, prototyping and testing parts doesn't make for exciting video content, but that doesn't mean it's not happening behind the scenes. When Apple releases a new product they usually don't show anything until close to release day even if it might've been 1-2 years in the works.
Did Kawasaki ever fix the clutch return on their later models?
We have heard reports of yes and no from end users. They definitely did change some components that are supposed to correct the issues. We still opt to install our external spring kitvon the bikes we build, if not for anything else but to make the clutch feel more "there."
To bad the frame slider doesn’t work with cali emission.
It does. You should look up the tech tip video we made on that siuubject. It is available in the product page of the frame sliders.
Can you get parts for a cf moto 300 ss
Cirrently we are not interested in making any more parts for CF Moto bikes.
- BR
All good mods but not the best companies. Great idea giver thanks guys
?? What does this even mean?
i want to ask if anyone knows Z400 can be modified as a ninja 400?
They share a lot of similar OEM part numbers like the frame so you can probably do it but why when you can just buy a Ninja 400?
Where can I get TST INDUSTRIES decals ??
We will soon be offering them on our website.
What about tuning?
We have not messed too much with tuning this bike too much just yet. Our other N400 that we have been using for racing sees the Dyno very often. At some point we will be tearing into this bike's tune as well but that has not happened yet.
RON IS RAD
Any way I can just get a tst sponsor? Y'all may as well be building my bike, only difference is the color at this point🤣
Aweee...
Wow
OK. Good or bad wow?
$1300 for the exhaust system is nuts
Your products are fairly cheap. Nice!
We prefer the term "inexpensive" but we love the feedback!
@@TSTindustries goes beyond inexpensive, they're way too cheap for its superb quality and that's a very good thing making me a fan of your products. Only sucks cause of the overseas shipping tho but overall very nice!
@@rodmaiquez726 we are always looking for distributors and dealers in international market. Having a local outlet cuts down on those shipping costs. Hopefully we can offer that in your area sooner than later.
We keep our parts inexpensive because we circumvent several expense adding things. We have a sophisticated design team and access to very good manufacturing technology. This means we can design and produce the parts ourselves, and then sell them directly to the customer. This approach cuts down on middlemen and the associated costs.
WOW HOLY S....
I shouldn't watch this video because I'm now going to be spending a lot of money on mods
That is an side effect of watching some of our videos ;)
Test 123