For some reason all the normal Phillips head screw driver own don’t fit to take out the screw on the bottom of obsidian 2. Is there a specific size screw driver needed?
You're supposed to add one dust cover under the control/panel before you screw on the lever and then you put one dust cover above the panel after screwing in the lever. The dust covers are not supposed to be directly above each other. I don't use j levers as much as k levers these days but I had a few Seimitsu levers and they do the same thing with the dust cover. It just improves the protection against dust and it's easier to maintain the j lever. Of course, I would not subjugate myself to use a shaft cover on any lever these days so to each their own on that front.
Thanks for the input, I already have one under it. I just added 2 because i felt like the see through one was not as "safe" it works and looks fine with 2 on it IMO so thats why i went with it.
Perfect timing because i just ordered this arcade stick and wanting to customize it to my liking, i’ll try see if i like the stock one tho first, then i’ll try mod it, I ordered me some gravity KS grey qanba buttons and a joystick top😎 i never used a joystick controller, hopefully it won’t be that hard to customize
Thanks for the vid. First time modding any stick and I fixed/modded my Obsidian 2 in one go. Super comprehensive video.
Thank you, im glad i could help c:
For some reason all the normal Phillips head screw driver own don’t fit to take out the screw on the bottom of obsidian 2. Is there a specific size screw driver needed?
You're supposed to add one dust cover under the control/panel before you screw on the lever and then you put one dust cover above the panel after screwing in the lever. The dust covers are not supposed to be directly above each other. I don't use j levers as much as k levers these days but I had a few Seimitsu levers and they do the same thing with the dust cover. It just improves the protection against dust and it's easier to maintain the j lever. Of course, I would not subjugate myself to use a shaft cover on any lever these days so to each their own on that front.
Thanks for the input, I already have one under it. I just added 2 because i felt like the see through one was not as "safe" it works and looks fine with 2 on it IMO so thats why i went with it.
Perfect timing because i just ordered this arcade stick and wanting to customize it to my liking, i’ll try see if i like the stock one tho first, then i’ll try mod it,
I ordered me some gravity KS grey qanba buttons and a joystick top😎 i never used a joystick controller, hopefully it won’t be that hard to customize
Glad to hear, i did find many videos on this stick when i wanted to mod it myself its not that hard to mod enjoy the stick
Gonna mod mine rn Thank you!!!
To all who watched this video- I cringed I'm sorry. As a modder of over 10 years do NOT use a knife to get tabs off, instead use tweezers.
Hi there! Thanks for the informative video! I just wanted to ask, where did you get the clear acrylic panel?
The qanba store??????? or focus attack too lol .
@@Crowlo17 sure!
@@Ivan-fp2cvlook it up b4 asking lol everyone has google
@@Crowlo17 not sure i recalled asking you!
@@Ivan-fp2cv ok 12 year old
what website did you use?
What is the difference between qanba gravity and the ks buttons?
The qanba gravity ks buttons are the same button i believe
KS buttons are shorter in height and snap in. Gravity buttons are screw in and taller in height.
thx man. appreciated.
Thank you, im glad i could help c:
Where did you buy the solo leveling art?
I made it myself and ordered it from Japan
@@WhIteBerseker 👀 very cool!! Can’t wait to customize mine. So far I just put new gravity ks buttons on