Drone night comparison of LED vs. OEM bulbs on the Miata! AUXITO high beam and reverse lights.

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 มิ.ย. 2024
  • Back with another LED update, I finally found some proper high beams that don’t give any error codes! Also switched my reverse lights and found that not all LED lights are made the same. Big thanks to AUXITO for shedding some light on my LED hopes and dreams.
    And big thanks to @iMaxPatten with the DJI Mavic Pro 3 coming in clutch for night time footage with that fantastic sensor.
    [ LINKS ]
    - AUXITO referral link: www.auxito.com/bie6FOU2bJRY-P
    - HIGH BEAMS: www.auxito.com/collections/au...
    - REVERSE LIGHTS: www.auxito.com/collections/92...
    #auxito #led #miata
    [ TIMELINE ]
    00:00 Intro
    01:59 Unboxing
    05:28 High beam install
    07:48 High beam comparison
    10:28 Reverse light install
    12:55 Reverse light comparison
    14:46 Final thoughts
    Like and subscribe for more content!
    [ SOCIAL MEDIA ]
    Instagram:
    → @flywheelfilms
    → @ghosty.miata
    Podcasts:
    → The Flywheel Films Show
    [ ABOUT Flywheel Films ]
    We are brothers who love cars, cameras, and coffee. Jordan lives in Colorado, Austin in Arkansas. On this channel, we showcase car meets via cinematic compilations, update you on our own builds (NC Miata, Zero SR) and even throw in camera and coffee tidbits throughout! From informational vlogs to product features/reviews to juicy cinematic b-roll, Flywheel Films is a place for auto enthusiasts. Follow our instagram for more car photography!

ความคิดเห็น • 23

  • @austinschiefer1284
    @austinschiefer1284 ปีที่แล้ว +4

    Drone footage comparison is a nice perspective, thanks homie

  • @Jeffboydr
    @Jeffboydr ปีที่แล้ว

    Yaaay, Iwanna see more power mods, more track days, more auto x and car adventures with friends with cool veloster N's =P

  • @jeff8ball
    @jeff8ball ปีที่แล้ว +1

    Nice job... Thanks!

  • @Fredline57
    @Fredline57 ปีที่แล้ว +3

    I think you're suppose to use the white gloves to install the bulbs without getting your oily/dirty fingers on the LED's...

  • @toshibavoodoo
    @toshibavoodoo ปีที่แล้ว

    Cool

  • @marccourt7363
    @marccourt7363 ปีที่แล้ว

    Once again a great video. Do you any recommendations for the brake and tail lights?

  • @ttinnovations3310
    @ttinnovations3310 4 หลายเดือนก่อน

    I've been buying SeaLight LED (model without the fan) off of Amazon an have done 10 Toyota Cars and 1 Jeep without any issues , the one I did on my 2011 Toyota Rav4 I drove cross country and back and left them on for 14hrs and they still have burned out after 11,000 miles + of driving

  • @mr.greenstein8168
    @mr.greenstein8168 ปีที่แล้ว

    Hey there I love the video and just purchased these lights for my 2011 grand touring! Also, I wanted to mention I was able to find a pretty good fix for the rattling retractable hardtop. I'm not sure if yours is still rattling or not but I found a really good solution!

    • @FlywheelFilms
      @FlywheelFilms  ปีที่แล้ว

      Let us know what you did! I did a fix back in 2021, but I need to check it again because that fix may be starting to wear down. But I used adhesive foam inside the latch mechanism.

    • @mr.greenstein8168
      @mr.greenstein8168 ปีที่แล้ว

      @@FlywheelFilms So what I did is kind of the same thing, except buy used 1mm felt tape inside the latch mechanism along with both left and right latch points and it made a huge difference.

  • @jwb1965
    @jwb1965 ปีที่แล้ว

    Love your videos! Hey if you painted your garage you would be shocked how good it will look! Lol i know this doesn’t have anything to do with this video!

    • @FlywheelFilms
      @FlywheelFilms  ปีที่แล้ว

      No but that's definitely on my long long list somewhere! What color should I do...

  • @grahamjones5378
    @grahamjones5378 ปีที่แล้ว

    Just because the light is whiter does not make it automatically better. What counts is how well you can see obstackles/critters on the side of the road. Excessive glare will not help. A high CRI LED will help. At least this is only changing high beam bulb, not the low beam, so less likely to blind oncoming drivers as LED low beam bulbs (in halogen housings) can do. Assuming they are dipped...

  • @user-hp8de2su3n
    @user-hp8de2su3n 7 หลายเดือนก่อน

    I installed auxito lights into my fog and headlights but for some reason the highbeam dash light always stays “lit” even when not toggled. Do you know what might cause this. I own a 2008 NC1 GT model

  • @travish99
    @travish99 ปีที่แล้ว

    Is that a rollbar in the box?

  • @2AMcars
    @2AMcars ปีที่แล้ว

    i believe they're halogen bulbs not incandescent ones.

  • @justinmize7442
    @justinmize7442 ปีที่แล้ว

    Is it 420 lumens?

    • @FlywheelFilms
      @FlywheelFilms  ปีที่แล้ว

      Try 420 x 69 - 6900 + 420 + 420 + 420 and you're close.

  • @just_passing_through
    @just_passing_through 10 หลายเดือนก่อน

    You do realise that the light housings and reflectors on cars with halogen bulbs are completely different from the housings on LED vehicles? That’s why conversions are illegal, because the light is thrown in a completely different way, and without changing over the entire light housing you will be blinding everyone driving toward you. Very selfish, and very stupid.

    • @ColoredinLight
      @ColoredinLight 10 หลายเดือนก่อน +1

      Yea Jordan is an incredibly selfish person. I know him personally and all he does is drive behind me with his brights on. So selfish, and illegal.

    • @FlywheelFilms
      @FlywheelFilms  10 หลายเดือนก่อน +1

      I didn’t touch my headlights, which are most crucial in your point. That’s very valid. But brights are never used unless there are zero cars and people present. Basically off-road scenario! The other bulbs in their housings though make no difference. So I’m going to stick with my self-assessment that I’m neither selfish nor stupid, despite what Jackson says. 🤷🏻‍♂️

  • @FJB8646
    @FJB8646 ปีที่แล้ว

    You didn’t even gave to take the front bumper off!? Every time I see a headlight video on these cars they insist on taking front bumper off. Why is that?

    • @FlywheelFilms
      @FlywheelFilms  ปีที่แล้ว

      For some bulbs, it's definitely easier to take the bumper off. Especially if I were to replace the main projector bulbs. And turn signals are very very tight without the bumper off.