Master the Haas Side-Mount Tool Changer - Haas Automation Tip of the Day
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2024
- Have you ever wondered if you’re using your Haas side-mount tool changer as efficiently as possible? In this Tip of the Day, Mark explains how to define large and heavy tools, and shows how to load them properly, and designate them in the control to avoid a collision. Be sure to watch all the way to the end, where Mark demonstrates a cool trick for re-positioning tools within the carousel - without removing any tools!
Don’t miss any TIP-OF-THE-DAY videos. Click here (www.haascnc.com/whyhaas.html#...) to join our email list!
If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!
Follow Haas:
Facebook - / haasautomati. .
Instagram - / haas_automa. .
Twitter - / haas_automation - วิทยาศาสตร์และเทคโนโลยี
So glad to have learned that you can use P##->ATC FWD to pull a certain pocket. Thanks!
As a side note, if you need (2) empty pockets in the carousel between two Large tools, instead of the standard one empty pocket, we will need to designate the tools as XL Extra Large. On an NGC machine we can contact our HFO to get this "Extra Large" special configuration. On Classic Haas Controls, we would enable Parameter 315 Bit 3 "EXTRA-LARGE TOOLS" to get these extra pockets.
Your videos are wonderful. Through a strange job/circumstances I ended up becoming a self taught machinist thanks to this channel and NYCCNC and that led to me having to learn to run a Haas. No longer at that job and am currently trying to start a company, I look forward to the day when I’m doing well enough to afford my own Haas
Heck yea!! :)
If you know a better place to start over please tell me.
@gunthreadadapters.com Yeah. As a guy that makes barrel nuts and adapters ( I assume ) I dont suspect there is ANY country in the world that would be more favorable to you. Good luck man.
I program all my machines with every other tool pocket, ie-2,4,6,8,10 etc. This avoids tools hitting each other. I only used adjecnt pockets if need the pockets. And this method helps distribute tool weight around the carousel.
hot damn! the wealth of information on this channel is a godsend for me in doing my apprenticeship work. It's really interesting too ;)
THANK YOU!
Whoa! I just realised, I don't have an Instagram account or a girlfriend, so piss off
hi i from peru i liked your tips please more showme more thanks
Salute to your channel
Learning a great deal from your videos. Can u show me how to open a page to input my part programme? My cnc mill is not allowing me to do this. My lathe is however ok.
Thanks for your help....
its really helpful
Thank you!
I used something simular but in mdi and in code to get as many empty pockets next to each other to load up my tools quicker by calling the loaded pockets with a t number and the empty pocket with the p number after each other... And i would run this mdi program when i was getting my tools ready...
But that might only work if you use the same number for the same tool every time... I would also load drills before mills so you can probe the drills while getting the mills ready and pre mesured
Thanks for the great video, Mark. You made getting 3 empty pockets next to each other very understandable. Normally we have our Renishaw Probe in T41 or our +1. I emptied our tool carousel and resequenced the carousel. I am having a hard time wrapping my head around how to get the probe back in 41 and not lose a tool. Can you enlighten me? Thanks (VF4 NGC)
Always helpful tips.
Very interesting
Thanks very usefull
When using a large tool does the machine/holder still support +1 tool. In other words will it put a normal size tool into the large slot while the large tool is in the spindle?
For all of us with UTC's, we really need a way to renumber pockets like on SMTC. Being stuck with only 1-20 is severely handicapping us with large tool libraries.
Can you do this large tool setting and still use tool standby?
Hi, I had a question about older haas mills with side mounts. I have a 2005 VF2SS and can't seem to input a number larger than 25 into the pocket table since this mill has a 24+1 smtc. Is there a setting that I have to enable to utilize the 200 tool offsets that enabled with setting 90? Thank you.
I'm surprised you don't make a specific decal for each machine, so the user doesn't have to find the right size. In addition, it should show the value right on the diagram, rather than in a table one has to consult. Finally, why not have the software just take parameters for each new tool including the max diameter, and let it sort it out for the specific machine?
Rick - Great suggestions. I’ll pass them on to Engineering. - Mark, Haas Tip-of-the-day
Hi, Does anyone know how to avoid a double tool change? the problem is my T1 is a 4" face mill, T2 is a 3/8" cutter and my T4 is a 1/4" drill. The cycle ends with T3 and when I start a new cycle it changes the tool to T1 but puts T3 in the designated T1 pocket, so when changing to T2, the machine first puts on T3 in the spindle because it is in T1 pocket and then changes it to T2, losing a lot of time in the process. How can I avoid this??
Olá não fiz isso e o magazine travou com duas ferramentas grande desalinhou o magazine como faço para resolver.
pls make more videos
This will be extremely handy to know; we've got three machines at work with the advanced control, as well as five more with both types of legacy control's (and that's just in the mill department!!!). I've been preaching about this video series for a couple of years now, but most of the guys at work couldn't care less (until they get into trouble; then they want help).
What’s the XL key? Extra large? As in there can’t even be another large tool 2 tools down?
Hi Chad - On some older versions of software we set Parameter 315:3 to a “1” to set Large tools as XL. This forces the control to leave two empty spaces between Large tools, instead of one - like you describe. This “XL” feature hasn’t been released on a Next Gen control (the field is greyed-out), but we still have a simple solution. We can set the tools as “L” Large (see video), and then clear any adjacent pockets we want to on the Tool Table by highlighting them, entering [0], and pressing Enter. This will Clear those tool pockets, and they won’t be used again. Also, if I ever broke a carousel pocket somehow, I could “zero” it out in this same way, and the control would know to never use that pocket. - Mark, Haas Tip-of-the-day.
Is their a way to set an automatic home position when changing large tools so you dont crash into a fixture?
IDK on the classic control but on the NGC go to user positions in the settings and then I think its called tool change mid position. you can move the machine where you want with handle jog and then set it.
Is there a way to designate a tool as hand load only so it won't try to put it away and let me load the spindle empty?
Michael - For something like that, I’d create my own custom M-Code. You can write your own “M200” (or whatever number you’d like) that would automatically switch to an empty pocket, position the spindle, and wait for the operator to press a button to continue. Check out the Alias M video. th-cam.com/video/HZiJEt0bMA4/w-d-xo.html
. People will build their own “Wine Rack” tool holders, that mount on the tables as well, they’ll position the spindle over the tool and use an M82/M86 to clamp/unclamp. Contact your local dealer for help. - Mark, Haas Tip-of-the-day
I put an H in but my tool changer is still changing at full speed.....2008 vf3
and when use de option Extra Large?
5 inch shell mill...cat 40?
Why limit tool numbers to 200? What's the point of a limit? (My Heidenhain contoller can have thousands! It's extremely useful to be able to call unique tools via a large catalog.)
I wonder Lets say I have Large tool on Side mount tool changer and my code called and and it needs to replace my 10mm end mill to large tool after I finish my shell mill and i need lets say drill How its going back to its large pocket ? Im little confused
The Haas Control will take care of all of this, in the background. In this case the machine would automatically do a double tool change to guarantee that your designated Large tool (your shell mill) is always surrounded by empty pockets. - Mark, Haas Tip-of-the-day
@@haasautomation thank you Mark thats what I tought . I already make contact with my Local distributor to get some deals on Haas machines. Thank you for your videos and tips.
@@haasautomation So now l have a double tool change every time I use my 3inch flycutter. What a waste of time..
@@maksimschastlivtsev4691 How would you do it instead, *Magic?* 🤪
Hello Mark,
Please make a video for M Code & G code.
Initial level programming.
g0g90t0m3x0y0z0,,,,kkk
th-cam.com/video/iMx_UYrvuos/w-d-xo.html , and th-cam.com/video/hJM8pnUazpk/w-d-xo.html
I am a student at an institute specialized in mechanical industries, and I want to benefit from your great experience in this field but I am facing the problem of language because I do not speak English
Vtl cnc machine
Это разве не понятно сразу?
This sounds like a lot of work...
Daniel - brazil.
Thanks for the video
We just bought a vf5 with a 30 + 1 tool changer Servo driven and it's so fast compared to our 40 plus 1 tool changer which is Cam driven. We are still getting used to the next-gen control but I already like it better than the old one. Except for the probing it would be nice if day used hotkeys such as numbers to indicate which probing cycle you would like to use for example for the single surface I just hit page down and then up twice but it would be nice to just hit the number 8 and then down
Maybe that will be an update
Hi Aaron. Look for Mill Probing updates on the NGC machines, in software version 100.17.000.2040, which will be out in March. We’ve added just what you’d hoped for. Thanks for the comment. - Mark, Haas Tip-of-the-day