Make 3D Printing Filament From PET Bottle for Free
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- In this Video I have shared how you produce pet bottle filament for free
Subscribe for More 3D printing Video
Setting for W1209
SET 77.05
P0 Cool or Heat (H)
P1 Hysteresis 0.1
P2 Highest Temp (89)
P3 Lows temp (-50)
P4 Peobe correction (0)
P5 Delay 0-10 min (0)
P6 Key Tone 0-110 (off)
W1209 Buy Link - amzn.to/3OK1DPl
Stl Files - www.thingivers...
Hey Priyank really enjoyed your presentation style, it was not only fascinating to watch but you also let your personality show.
Thanks man, this comment made my day 🙂
Great work.. You have succeeded in achieving your goal. Well done..
Question: What is the temperature of the nozzle when the plastic is passed through it during the period of conversion to filament?.
Thanks man, It should be around 200 degree celcius
@@Creative3DP ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
Hi, not only the flow, is more improvements, as you say "the filament is hollow" and most of the time the problem starts on the extruder, when I start using this material (about 3 years ago) my big problem was the extruder stop feeding, that make to abort most of the prints, how I solved this problem, take out the brass gear from the extruder, get a triangle needle file, gentle file all the gear grooves one by one, that eliminate a chance to stop feeding, I print at 260.c slow one degree at the time until 255/6,
That is my experience with PETG / bottles, I have really nice prints, any color that i want. Greeting for all from South Africa
Hello, Yes you're right lot of slipping happens in extruder but what I found out is that it mainly happens when your filament is not properly rounded. I was facing that issue and I increased the strip size and tightened up the adjustable spring part of extruder
This temperature should be this value : Highest Temp 78-79
Sir after we set the settings after we off the module and on it again then the temperature gets save sir of w1209 module or we have to reset again?, pls reply sir
Este es el video que andaba buscando, muy bueno e información clara, muy buen video de información
What is the 12 to 24 part. Where can I find that
It's a PWM Controller
Thanks for the upload. What temperature and speed settings used for printing extruded PET bottle filament
Hotend temperature should be around 240 to 260 celcius and best speed would be 30 to 40 mm per second
Great video love your videos so helpful but question can I use a 12volt but 30 Amps or 12 volts and 10 Amp
Thank you, You can use 12v 10amp, it can provide enough power
@@Creative3DP thank you so much you are such a kind person ❤️
@@th1610 you're welcome
Interesting, but since we pay ~ 50 cents for the bottle this would be pretty expensive PET for me. We get the 50 cents back when returning the bottle to the shop.
It didnt make any problem for nozzle ? Like nozzle clogg or diffixult printing setting?
No
Hi my friend, you made a good job. I have a question, I don't use the system to make my pet filament but i have a problem, the filament isn't rounded it makes an "U", any suggestion? And if there isn't any solution, can i print like this? With the "U" shape? Thanks
The PET filament from the bottle is mostly hollow, if you increase the width of the PET strip a little bit, it will rounded
how to make hotend with nozzle
Hi ,thanks for the info, however way not show the settings to print with this petg? THAT IS THE MOST IMPORTANT PART,
is not easy to print with this material, lot of settings on CURA, and the printer has to be ready to accept this material, just saying!!!!
Yes, you are right. You need to increase the flow rate in cura because PET Filament is hollow
The 3d printer requires temperature of 260 degree Celsius , but that is not the problem.
The problem is the filament of pet bottles doens't go properly into the extruder, we have to handpush it , any upgrades for that sir?, And nozzle chokes in between , any solution for that sir?
It all depends on the machine's nozzle. If you're able to extrude 1.75mm of PET filament or maybe less you shouldn't face any problem. If it is more than 1.75 mm then there is a chance of choking a nozzle or maybe filament getting Tube & and make sure filament is properly rounded so that it doesn't get bent in Extruder
Hi read my comment, how to fix the extruder
so the max temperature is 89c°?
Great vide mate , can you do a comparison test between pla and pet filament
Thanks for the idea mate, will look into this
Hey Priyank, thats for the video.
What is the Diode you used in Thermostat?
How you ensured the hot end is having 240-250c , as the thermostat max you set is 89c. Any extra thermometer required to measure this?
set it to 89c & it actually reaches 240. I don't have any number or another thermometer for this but it works
@@Creative3DP so is it over melted or undermelted any time? Are you frequently using this setup? And is it giving prolonged better result?
@@SaleejKuruniyan it mostly gave me proper result few time it cause problem but it was due to size of the strip
what is the motor Specifications ? please
yo bro will the W1209 really help melt the pet bottle
May I ask which type of 2-pole body you are using?
I may have a problem in understanding your questions. Please elaborate
Bro what is the rpm of the dc motor that you are using in the puller? Please provide the buy link if available
Its 75kgcm 10rpm geared dc motor
very goood
Thank You
very helpful thank you
You're welcome
its actually met the bottles using all the parts because i try it but not melting the filament
You don't need to completely melt it but make sure the strip is between 5 to 7mm so that it can get round properly
@@Creative3DP I found the best size is 8mm, move the flow to 110% then came down until the layer is uniform. normally 104/102 % that because I use 8mm strips.
What temp are you printing with this filament?
Around 250 celcius
ดี
Sir video is very useful! But why that fake accent is needed? Its freaking irritating, just feels disgusting, honestly sorry to say sir it's a very Informative video but the accent is very irritating!